• 한국항공우주학회지
• /
• 제48권12호
• /
• pp.953-960
• /
• 2020

본 논문은 회전익기용 엔진 감속기 주 기어열의 기어 웹 형상 최적화에 대해 기술하였다. 최적화 목표는 총중량, 전달 오차, 정렬 오차, 치면 하중 분포 계수 값의 최소화로 설정하였으며, 기어의 웹 두께, 웹과 축의 연결 위치, 웹과 림의 연결 위치를 설계변수로 선정하였다. 최적화 과정에서 기어의 웹, 축, 림은 3D 캐드 모델로부터 유한요소 모델로 변환되었으며, 기어 해석 프로그램 MASTA에 입력되었다. 최적화 알고리즘은 NSGA-II를 사용하였다. 최적화 결과 주 기어열의 총중량, 전달 오차, 정렬 오차, 치면 하중 분포 계수 값은 모두 감소하였으며, 최대 응력도 안전한 수준으로 나타나서 전반적으로 기어 성능이 개선되었음을 확인하였다.

• Smart Structures and Systems
• /
• 제19권6호
• /
• pp.653-663
• /
• 2017

The modal parameters of the deck of Runyang Suspension Bridge (RSB) as well as their relationships with wind and temperature are studied based on the data recorded by its Structural Health Monitoring System (SHMS). Firstly, frequency analysis on the vertical responses at the two sides of the deck is carried out to distinguish the vertical and torsional vibration modes. Then, the vertical, torsional and lateral modal parameters of the deck of RSB are identified using Hilbert-Huang Transform (HHT) and validated by the identified results before RSB was opened to traffic. On the basis of this, the modal frequencies and damping ratios of RSB during the whole process of Typhoon Masta are obtained. And the correlation analysis on the modal parameters and wind environmental factors is then conducted. Results show that the HHT can achieve an accurate modal identification of RSB and the damping ratios show an obvious decay trend as the frequencies increase. Besides, compared to frequencies, the damping ratios are more sensitive to the environmental factors, in particular, the wind speed. Further study on configuring the variation law of modal parameters related with environmental factors should be continued.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권3호
• /
• pp.253-261
• /
• 2014

본 연구에서는 스퍼 유성기어시스템 2단, 헬리컬기어 시스템 1단으로 구성되어 있고, 메인 축과 증속기가 플랜지 결합되어 있는 동력분기식 2.5MW 풍력발전기에 대해 진동해석을 수행하였다. 유성기어시스템, 헬리컬기어시스템, 메인 축 등은 MASTA 상용프로그램으로 모델링하고, 기어박스 케이스, 토크암, 유성캐리어, 플랜지 등은 유한요소법으로 모델링하였으며, 부분구조합성법으로 조합하여 진동해석을 수행하였다. 2.5MW 동력분기식 풍력발전기 기어트레인의 고유진동 특성 해석을 수행하였고, 블레이드 풍하중에 의한 가진, 질량불평형, 축 어긋남 등에 발생하는 가진원에 대해 위험속도 분석을 하였다.

• 융합정보논문지
• /
• 제12권2호
• /
• pp.142-148
• /
• 2022

본 논문은 풍력발전기용 요 감속기를 경량화하여 유한요소해석과 위험속도해석을 통해 안정성검증을 하였다. 제품의 경량화는 엔진의 효율을 높일 수 있으며, 부품의 소재를 절약하여 경제적 이득을 취할 수 있다. IEC 61400-1에서 제시한 풍력발전기 부품의 안전율 1.3이상을 목표로 풍력발전기용 요 감속기를 경량화하였다. 위상 최적화를 수행한 캐리어를 유한요소해석을 수행하여 안전율을 나타냈고, 하우징과 최적화한 캐리어를 MASTA11을 활용하여 작성한 풍력발전용 요 감속기 기어트레인 모델과 부분구조합성법으로 연결하여 고유 모드와 고유진 동수를 파악하여 질량불평형과 치통과 주파수에 대하여 위험속도해석을 수행하였고, 캠벨 선도(Campbell Diagram)를 작성하여 안정성 검증을 하였다.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.732-737
• /
• 2011

The planetary gear reducer becomes more and more widely used in machine industries. The planetary gear reducer has a significant role to transmit power to wheel & tire module in the In-wheel system. Thus, the planetary gear reducer should have strong stiffness and durability. In this paper, the contact and bending stresses at the tooth of the planetary gear reducer are analyzed using MASTA, a commercial gear design and analysis software. Stress distribution at the tooth face of the sun, planetary and annulus gears are obtained using the finite element method. The design modification is performed using the response surface method. The usefulness of the design modification and optimization method presented in this paper is verified by comparing the maximum stresses of the original and optimized planetary gear tooth.

• 한국기계가공학회지
• /
• 제20권5호
• /
• pp.8-16
• /
• 2021

This study develops a shaft analysis model for the optimization of the power transmission system. The finite element method was used for the shaft analysis model. The shaft and gear were assumed Timoshenko beams. Strength was evaluated according to DIN 743, and gear misalignment was calculated through ISO 6336 and the coordinate system rotation. The analysis software for a power transmission system was developed using Visual Studio 2019. The analysis results of the developed program were compared with those of commercial software (MASTA, KISSsoft, and Romax). We confirmed that the force, deformation, and safety factors at each node were the same as those of the commercial software. The absolute value of the gear misalignment of the developed program and commercial software was different. However, the gear misalignment tended to increase with increasing the displacement in the tooth width direction.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.314-323
• /
• 2014

In this study, a gearbox and blade were modeled in the MASTA program, and the housing and carrier components were modeled using a finite element method. Using substructure synthesis, all the components were combined and used to establish a vibration model of a 2.5-MW wind turbine gearbox. In addition, the safety displacement factor was evaluated using an AGMA data sheet about bearing's outer race for the input shaft and output shaft. As a result, the bearing's outer race for the input shaft, and the radial and axial responses were satisfied by the $1^{st}$ and $2^{nd}$ planetary gears and the $3^{nd}$ helical gear transmission error(TE), respectively. However, the output shaft support bearing's outer race responses were not satisfied with the radial response by the $2^{nd}$ TE and axial response by the $3^{rd}$ TE. To reduce the vibration, tooth modification was needed. After profile tooth modification, at the outer race of the output shaft support bearing, the radial response was reduced by approximately $20{\mu}m$, and the axial response was reduced by approximately $6{\mu}m$.