Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

Vibration characteristics of power differential gear train for 2.5MW wind turbine

2.5MW 풍력발전기 동력분기식 기어트레인의 진동특성

  • Kim, Jung Su (School of Mechanical Engineering, Korea Pusan National University) ;
  • Park, No Gill (School of Mechanical Engineering, Korea Pusan National University) ;
  • Lee, Hyoung Woo (Department of Mechatronics Engineering, Jungwon University)
  • Received : 2014.02.10
  • Accepted : 2014.04.01
  • Published : 2014.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, vibration analysis of power differential gear train for 2.5MW wind turbine system is analyzed. which system is composed of two planetary gear set, one helical gear set and main shaft that connected by flange. Planetary gear set, helical gear set, main shaft are modeled in MASTA program and housing, torque arm, carrier, flange components are modeling by finite element method. Each models are combined by component mode superposition. To analysis of natural vibration characteristic about 2.5MW wind turbine gear train was performed and check about critical speed with wind load, mass unbalance, angle misalignment excitation frequency.

본 연구에서는 스퍼 유성기어시스템 2단, 헬리컬기어 시스템 1단으로 구성되어 있고, 메인 축과 증속기가 플랜지 결합되어 있는 동력분기식 2.5MW 풍력발전기에 대해 진동해석을 수행하였다. 유성기어시스템, 헬리컬기어시스템, 메인 축 등은 MASTA 상용프로그램으로 모델링하고, 기어박스 케이스, 토크암, 유성캐리어, 플랜지 등은 유한요소법으로 모델링하였으며, 부분구조합성법으로 조합하여 진동해석을 수행하였다. 2.5MW 동력분기식 풍력발전기 기어트레인의 고유진동 특성 해석을 수행하였고, 블레이드 풍하중에 의한 가진, 질량불평형, 축 어긋남 등에 발생하는 가진원에 대해 위험속도 분석을 하였다.

Keywords

References

  1. S. Heier and R. Waddington, Grid Integration of Wind energy conversion system, 2nd Edition, John Wiley & Son, Ltd, pp. 111-116, 2006.
  2. H. W. Lee, D. H. Jung, and N. G. Park, "A study on dynamic characteristics of gear-system", Journal of the Korean Society for Noise and Vibration Engineering, vol. 10 no. 1, pp. 74-81, 2000 (in Korean).
  3. H. W. Lee, D. H. Lee, and N. G. Park, "An analytical investigation on vibrational characteristics of turbo compressor", Journal of the Korean Society for Noise and Vibration Engineering, vol. 8, no. 6, pp. 1069-1077, 1998 (in Korean).
  4. Jung Su Kim, Hyoung Woo Lee, No Gill Park, Young Duk Kim, Soo Yum Kim, and Dong Hwan Lee, "Characteristic of vibration in wind turbine system", Journal of the Korean Society of Marine Engineering, vol. 35, no. 6, pp. 786-795, 2011 (in Korean). https://doi.org/10.5916/jkosme.2011.35.6.786
  5. Michael Todorv and Georgi Vukov, "Modal properties of drive train in horizontal-axis wind turbine", Proceedings of International Conference on Innovations, Recent Trends and Challenges in Mechatronics, vol. 3, pp. 160- 168, 2011.
  6. J. S. Kim, H. W. Lee, N. G. Park, and D. H. Lee, "A study on wind load variation characteristics of wind turbine gearbox", Journal of the Korean Society of Marine Engineering, vol. 36, no. 2, pp. 267-275, 2012 (in Korean). https://doi.org/10.5916/jkosme.2012.36.2.267
  7. N. G. Park and H. W. Lee, "An investigation on the characteristics of gear trains of wind turbines", Journal of the Korean Society of Marine Engineering, vol. 34, no. 6, pp. 806-815, 2010 (in Korean). https://doi.org/10.5916/jkosme.2010.34.6.806
  8. W. C. Hurty, "Vibrations of structural systems by component mode synthesis", Journal of the Engineering Mechanics Division, vol. 86, pp. 59-69, 1960.
  9. W. C. Hurty, "Dynamic analysis of structural systems using components modes", American Institute of Aeronautics and Astronautics, vol. 3, no. 4, pp. 678-685, 1965. https://doi.org/10.2514/3.2947
  10. R. R. Craig, M. C. C. Bampton, "Coupling of substructures for dynamic analysis", American Institute of Aeronautics and Astronautics, vol. 6, pp. 1313-1319, 1968. https://doi.org/10.2514/3.4741