• The Korean Journal of Quaternary Research
• /
• v.14 no.1
• /
• pp.1-5
• /
• 2000

During the last three years (1997∼2000), a research project of beach dynamic environmental process and dynamic nature of the Nobong Beach, East Sea of Korea has been carried out for a better understanding of beach cycle (winter and summer). In fact, however, this paper deals with a particular feature of beach dynamics, that is, overwash process of overwash water and its sediments. The overwash mark sediments (OMS) are analyzed to understand various textural characters.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.832-837
• /
• 1997

본 연구에서는 반도체 소자의 수율을 현저히 저하시키는 반도체 습식 세정 시 건조 후 웨이퍼 표면에 형성된 water mark의생성 원인을 고찰하였다. 이를 위해 초순수수의 물방울을 다른 접촉각의 시편 위에 고의로 잔류시킨 후 질소 및 산소 분위기에서 건조시켰다. 건조 분위기와 상관없이 HF 처리된 소수성의시편 뿐만 아니라 친수성의 시편에서도 water mark이 관찰되었다. 생성된 water mark의 크기는 분위기에 무관하게 접촉각이 증가함에 따라 감소하였다. 그러나 산소 분위기에서 HF처리된 시편은 건조 후 질소 분위기에서 생성된 water mark의 크기보다 2배이상 크게 형성되었다. 이들 산소 및 질소 분위기에서 HF 처리된 실리콘 시편 위에 생성된 water mark의 성분을 AES(Auger Electron Spectroscopy)로 분석한 결과 water mark는 실리콘과 산소의 화합물 형태로 존재함을 확인하였다. AAS(Atomic Absorption Spectroscopy)분석 결과 건조 분위기에 상관 없이 HF처리된 실리콘 시편 위에 물방울을 30분 잔류시 물방울 내의 실리콘 농도가 증가하였다. 또한 물방울내 ozone을 첨가하여 실리콘 표면을 산화 시켰을 때 물방울과 표면의 접촉각 감소와 water mark의크기의 증가를 초래하였다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.2
• /
• pp.115-120
• /
• 2009

Description in this paper is a system for new range measurement method between an aircraft and runway with circular mark in landing runway. The system includes an altimeter and a camera installed on the aircraft, and a circular mark placed on a landing runway. The camera installed on the aircraft must be oriented toward in front of the aircraft, and configured to detect the shape of the circular mark in image information form and a flight control computer configured to calculate the angle between the aircraft and the ground, the ground range between the aircraft and the circular mark, and the slant range between the aircraft and the circular mark with the altitude information measured by the altimeter. This system configured to control the automatic landing of the aircraft with this information.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.109-115
• /
• 2010

Interstitial-free (IF) steels are widely used for car body material. However, a few types of streaky mark defect are commonly found on hot dip galvannealed (GA) IF steel sheets. In the present study, both the phase structure of a streaky mark defect and the microstructure of the substrate just below it were characterized by optical microscopy (OM) and scanning electron microscopy (SEM). It was found that the bright streaky mark area was composed of ${\delta}$ phase while the dark normal area was full of craters. More than half of the grains at the uppermost surface of the substrate just below the streaky mark defect are unrecrystallized grains which could result from lower finish rolling temperature during hot rolling and be kept stable during the annealing process, while almost all the grains in the normal area are equiaxed grains. In order to confirm the effect of the unrecrystallized grains on the coating morphology, hot dip galvannealing simulation experiments were carried out in IWATANI HDPS. It is proved that the unrecrystallized grains accelerate the Fe-Zn reaction rate during galvannealing and result in a flatter coating surface and an even coating thickness. Finally, a formation mechanism of the streaky mark defect on the hot dip galvannealed IF steel sheet was discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1358-1367
• /
• 1993

In this paper, OMR system based on image processing is developed which improve the performance of conventional OMR system based on line-scan method. Based on this OMR system, real-time OCR system which recognizes alphanumerics is also developed. We propose the OMCR system which recognize the mark and numerals at the same time. Besides, we improve the input system using constrained 7-segment type handwritten numeral instead of mark to solve the problem caused by miswriting the mark. In summary, we verified the reai-time recognition performance of developed OMCR system using application form for admission, answer sheet for college entrance examination and receipt sheet.

• Korean Journal of Remote Sensing
• /
• v.19 no.1
• /
• pp.61-70
• /
• 2003

This paper proposes an autonomous approach to localize the center of fiducial marks included in aerial photographs without precise geometric information and human interactions. For this localization, we present a conceptual model based on two assumptions representing symmetric characteristics of fiducial area and fiducial mark. The model makes it possible to locate exact center of a fiducial mark by checking the symmetric characteristics of pixel value distribution around the mark. The proposed approach is composed of three steps: (a) determining the symmetric center of fiducial area, (b) finding the center of a fiducial mark with unit pixel accuracy, and finally (c) localizing the exact center up to sub-pixel accuracy. The symmetric center of the mark is calculated tv successively applying three geometric filters: simplified ${\nabla}^2$G (Laplacian of Gaussian) filter, symmetry enhancement filter, and high pass filter. By introducing a self-diagnosis function based on the self-similarity measurement, a way of rejecting unreliable cases of center calculation is proposed, as well. The experiments were done with respect to 284 samples of fiducial marks composed of RMK- and RC-style ones extracted from 51 scanned aerial photographs. It was evaluated in the visual inspection that the proposed approach had resulted the erroneous identification with respect to only one mark. Although the proposed approach is based on weak constraints, being free from the exact geometric model of the fiducial marks, experimental results showed that the proposed approach is sufficiently robust and reliable.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.15-31
• /
• 2000

1. After the Chu Dynasty(周代), we can confirm the fish shape mark made of stones as the relics of the Chunkuk dynasty(戰國時代). In the Shu Dynasty(隋代), the system of bamboo and the rabbit shape mark made of silver into the fish shape mark. As it were, made of bamboo or siltier changed into the fish shape mark made of jade, gold, silver or wood. 2. In the Dang Dynasty(唐代), the used the fish shape credit mark made of jade, gold, silver, copper or textile, according to their classes. According to one's posit the man who wore purple, red coat, credit mark made a gold and silver. attached with putting them in fish bags. 3. In the Ryo Dynasty(遼代), there was also a system of attaching marks. The emperor was hanging the fish shape and the officials attached the double fish shape to the common dress. fish shape of jade. gold, amber, agate, silver or copper. without any fish bag. 4. The Song Dynasty(宋代) followed the system of the Dang Dynasty they used only the fish shape bags without marks in them. Hanging the fish shape bags made of gold and silver at the back side of the belt. 5. The Gin Dynasty(金代) carried out the system of made jade, gold or silver like the Dang, Song and Ryo Dynasty. In the Sejong Kingdom a system of paper card was carried out as the credit mark of the eighth and the ninth grade. 6. In the Ming Dynasty(明代), the military official general attached the golden, silver, ivory of jade, wood and copper cards with their positions and names. 7. Following the Dang Dynasty, Japan made of fish shape bags to their clothes. Colors of their fish shape marks were same as their clothes. They made the marks, such as crystal, cow's horn, lead and nickel and plated them with gold or silver. 8. In Korea, Pohai(발해) established the fish shape credit mark differed in material. gold, silver or copper according to their positions. We can confirm the Unified Silla(南國;統一新羅), carried out the system of attaching the fish shape in Chonma Chong(천마총), Golden Crown Chong(金冠塚), the King's 13-17 belt ring unearthed at the north part of Court South threat Chong(황남대총), the fish shape golden or silver, to their purple or red ceremonial coats. In the Koryo Dynasty(高麗), like the Dang, Song and Pohai, they attached the fish shape golden or silver marks, to their purple or red ceremonial coats.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.5-16
• /
• 2005

As for the public, it is hard to understand semiotics because of the scope of an enormous semiotics education. This study is making semiotics of Charles Sanders Peirce the subject. I thought that utilization can hold his semiotics study in a visual design field. First of all, this study considered design related papers related to the existing semiotics again and study found an error of the existing semiotics study and understanding did category concept with re-definition about semiotics of Peirce. Explained a symbol mark through understanding of semiotics of Peirce. This study was able to get the following conclusion through these results. 1) A symbol mark means one product, sonics, company oneself with a custom. Therefore, it is a rule symbol in the Representation side. 2) A symbol mark symbolizes an object with one symbol, so a symbol mark is a symbol in an object. 3) Because a symbol mark exists through a social rule, in semiotics definition of Peirce, this must become understanding with a Argument symbol. 4) A symbol mark is what a company or an organization field used from the past, and the public are recognizing this how. Therefore, it works as fact a company attaches a symbol mark to own product, and to show the public a symbol mark. A symbol mark is Dicent Sign in Interpretant. A rule and understanding about a lot of types which have various mutual relation, Peirce classification and understanding of a symbol mark tells to demand is holding that understanding a type of semiotics with the concept that is not an image to us.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.783-795
• /
• 2017

This study measured consumer's recognition, reliability, emotion and images about current eco-marks as well proposed an eco-mark rating scale and mark designs to improve consumer's trust on the fashion product marks. We used a questionnaire survey to collect data from 150 persons about knowledge, interests, and practice on eco fashion products in relation to trustfulness and positive images for three domestic and three international eco-marks. We evaluated and gave eco scores to six fiber-type products (cotton, organic cotton, wool, polyester, biodegradable polyester and nylon) in terms of consumer's use, water & land consumption, waste amount, carbon footprint, and toxicity. We suggested a new 5-level rating scale for eco marks, which quantified the concept of environmental friendliness of fiber products. The design for eco-mark of rating scale showed the total grade with two sub scores of environmental sides and human sides developed with an improved visual understanding for consumers. The design is one through benchmarking the energy-consumption efficiency mark, which is familiar to consumers such as a half circle shape to save environment resources to alarm consumers to environment problems.

• Publications of The Korean Astronomical Society
• /
• v.22 no.3
• /
• pp.63-73
• /
• 2007

In this paper, we introduce the performance test results of digital data processing system for KVN (Korean VLBI Network). The digital data processing system for KVN consists of DAS (Data Acquisition System) and high-speed recorder which called Mark5B system. DAS system performs the digitalization of analog radio signal through ADS-1000 gigabit sampler with 1 Gsps/2-bit and process the digital filtering of digital signal. Mark5B system records the output data of DFB (Digital Filter Bank) with about 1 Gbps. In this paper, we carried out the preliminary evaluation experiments of the KVN digital data processing system connected between DAS system and Mark5B with VSI (VLBI Standard Interface) interface which is designed for compatible in each VLBI system. We first performed all of the KVN digital data processing system connected by VSI interface in the world. In factory inspection phase, we found that the DAS system has a memory read/write error in DSM (Digital Spectrometer) by analyzing the recorded data in Mark5B system. We confirmed that the DSM memory error has been correctly solved by comparing DSM results with Mark5B results. The effectiveness of KVN digital data processing system has been verified through the preliminary experiments such as data transmission, recording with VSI interface connection and data analysis between DSM and Mark5B system. In future work, we will perform the real astronomical observation by using the KVN 21m radio telescopes so as to verify its stability and performance.