The curing characteristics of naphthalene type epoxy resin systems according to the change of curing agent were investigated to develop a new next-generation EMC(Epoxy Molding Compound) with excellent warpage characteristics, low thermal expansion, and excellent fluidity for WLP(Wafer Level Package). As epoxy resins, DGEBA, which are representative bisphenol type epoxy resins, NE-16, which are the base resins of naphthalene type epoxy resins, and NET-OH, NET-MA, and NET-Epoxy resins newly synthesized based on NE-16 were used. As a curing agent, DDM (Diamino Diphenyl Methane) and CBN resin with naphthalene moiety were used. The curing reaction characteristics of these epoxy resin systems with curing agents were analyzed through thermal analysis experiments. In terms of curing reaction mechanism, DGEBA and NET-OH resin systems follow the nth curing reaction mechanism, and NE-16, NET-MA and NET-Epoxy resin systems follow the autocatalytic curing reaction mechanism in the case of epoxy resin systems using DDM as curing agent. On the other hand, it was found that all of them showed the nth curing reaction mechanism in the case of epoxy resin systems using CBN as the curing agent. Comparing the curing reaction rate, the epoxy resin systems using CBN as the curing agent showed a faster curing reaction rate than them with DDM as a hardener in the case of DGEBA and NET-OH epoxy resin systems following the same nth curing reaction mechanism, and the epoxy resin systems with a different curing mechanism using CBN as a curing agent showed a faster curing reaction rate than DDM hardener systems except for the NE-16 epoxy resin system. These reasons were comparatively explained using the reaction rate parameters obtained through thermal analysis experiments. Based on these results, low thermal expansion, warpage reduction, and curing reaction rate in the epoxy resin systems can be improved by using CBN curing agent with a naphthalene moiety.
As a brittle failure mode, punching-shear failure can be widely found in traditional RC slab-column connections, which may lead to the entire collapse of a flat plate structure. In this paper, a novel RC slab-column connection with inner steel truss was proposed to enhance the punching strength. In the proposed connection, steel trusses, each of which was composed of four steel angles and a series of steel strips, were pre-assembled at the periphery of the column capital and behaved as transverse reinforcements. With the aim of exploring the punching behavior of this novel RC slab-column connection, a static punching test was conducted on two full-scaled RC slab specimens, and the crack patterns, failure modes, load-deflection and load-strain responses were thoroughly analyzed to explore the contribution of the applied inner steel trusses to the overall punching behavior. The test results indicated that all the test specimens suffered the typical punching-shear failure, and the higher punching strength and initial stiffness could be found in the specimen with inner steel trusses. The numerical models of tested specimens were analyzed in ABAQUS. These models were verified by comparing the results of the tests with the results of the analyzes, and subsequently the sensitivity of the punching capacity to different parameters was studied. Based on the test results, a modified critical shear crack theory, which could take the contribution of the steel trusses into account, was put forward to predict the punching strength of this novel RC slab-column connection, and the calculated results agreed well with the test results.
Lade의 Double surface와 Single surface 구성모델의 변형을 예측의 정도를 비교평가하기 위하여 백마강모래로 두 구성식의 토질매개변수를 다수 구하고 각 변수의 통계치를 분석하였다. 이 통계치를 이용하여 일반함수의 변동계수를 산정하는 1계근사법으로 두 구성모델의 변형율에 대한 변동계수를 해석하였다. 그 결과 각 토질매개변수의 결정에는 Single surface 구성모델의 변수가 Double surface 구성모델의 변수보다 변동계수가 작게 나타나므로 매개변수결정에 일관성이 있는 반면 확률론으로 해석한 축 변형율의 변동계수는 Double surface 구성모텔에서 안정된 값을 나타내고 있으며, 체적 변형율에서는 두 구성모델 모두 안정된 해석결과를 보인다. 이는 두 구성모델의 특성을 비교한 다른 연구 결과와 일치하는 경향으로서 확률론에 의한 구성식의 평가가 효과적인 수단임을 알 수 있었다.
This paper presents the results of cyclic loading tests on new high-strength concrete (HC) short columns. The seismic performance and deformation capacity of three reinforced high-strength concrete filled Polyvinyl Chloride tube (RHC-PVCT) short columns and one reinforced high-strength concrete (RHC), under pseudo-static tests (PSTs) with vertical axial force was evaluated. The main design parameters of the columns in the tests were the axial compression ratio, confinement type, concrete strength, height-diameter ratio of PVCT. The failure modes, hysteretic curves, skeleton curves of short columns were presented and analyzed. Placing PVCT in the RHC column could be remarkably improved the ultimate strength and energy dissipation of columns. However, no fiber element models have been formulated for computing the seismic responses of RHC-PVCT columns with PVT tubes filled with high-strength concrete. Nonlinear finite element method (FEM) was conducted to predict seismic behaviors. Finite element models were verified through a comparison of FEM results with experimental results. A parametric study was then performed using validated FEM models to investigate the effect of several parameters on the mechanical properties of RHC-PVCT short columns. The parameters study indicated that the concrete strength and the ratio of diameter to height affected the seismic performance of RHC-PVCT short column significantly.
In order to investigate the possibility of using mixed rare earth $(Nd_{1/3}Eu_{1/3}Gd_{1/3})Ba_2Cu_3O_{7-x}$ (NEG123) as the superconducting layer of the HTS coated conductor, the NEG123 thin film was deposited epitaxialy on LAO(100) single crystal and IBAD_YSZ metal templates by pulsed laser deposition. Systematic studies were carried out to investigate the influences of deposition parameters of PLD on the micro structure, texture and superconducting properties of NEG-123 coated conductor. Deposition at oxygen partial pressure of 600 mTorr was needed to routinely obtain high quality NEG123 films with $J_c$'s (77K) over 2 MA/$cm^2$ and Tc's over 90K (${\Delta}T{\sim}2\;K$). We verified from magnetization study that the NEG123 has an improved in-field Jc as the field increases at temperatures between 10 K and 77 K compared with Gd123. The $J_c$ (77K, self field) and the value of onset $T_c$ of NEG123 thin film on LAO substrate was $4.0MA/cm^2$ and 92K, respectively. This is the first report, to the best of our knowledge, of coated conductors with NEG123 film as the superconducting layer which have Ic and Jc over 40 A/cm-width and 1.6 MA/$cm^2$ at 77K, self field. This study shows the possibility of using NEG123 film as the superconducting layer of the HTS coated conductor which can be used in high magnetic field power electric devices.
Kim, Yong-Ho;Kang, Jin-Mo;Kim, In-Ryoung;Lee, Bo-Young;Yoon, Ji-Young;Kim, Cheul-Hong;Park, Bong-Soo
International Journal of Oral Biology
/
제39권2호
/
pp.97-105
/
2014
The aim of this study was to determine the beneficial effect of propofol on human keratinocytes that have undergone hypoxia reoxygenation (H/R) injury and to investigate whether autophagy is associated with the protective mechanism. Thus, we evaluated how propofol influences the intracellular autophagy and apoptosis during the H/R process in the HaCaT cells. The cultured human keratinocyte cells were exposed to 24 h of hypoxia (5% $CO_2$, 1% $O_2$, 94% $N_2$) followed by 12 h of reoxygenation (5% $CO_2$, 21% $O_2$, 74% $N_2$). The experiment was divided into 4 groups: (1) Control=Normoxia ; (2) H/R=Hypoxia Reoxygenation ; (3) PPC+H/R=Propofol Preconditioning+Hypoxia Reoxygenation; (4) 3-MA+PPC+ H/R=3-MA-Methyladenine+Propofol Preconditioning+ Hypoxia Reoxygenation. In addition, Western blot analysis was performed to identify the expression of apoptotic pathway parameters, including Bcl-2, Bax, and caspase 3 involved in mitochondrial-dependent pathway. Autophagy was determined by fluorescence microscopy, MDC staining, AO staining, and western blot. The H/R produced dramatic injuries in keratinocyte cells. In our study, the viability of Propofol in H/R induced HaCaT cells was first studied by MTT assay. The treatment with 25, 50, and $100{\mu}M$ Propofol in H/R induced HaCaT cells enhanced cell viability in a dose-dependent manner and $100{\mu}M$ was the most effective dose. The Atg5, Becline-1, LC3-II, and p62 were elevated in PPC group cells, but H/R-induced group showed significant reduction in HaCaT cells. The Atg5 were increased when autophagy was induced by Propofol, and they were decreased when autophagy was suppressed by 3-MA. These data provided evidence that propofol preconditioning induced autophagy and reduced apoptotic cell death in an H/R model of HaCaT cells, which was in agreement with autophagy playing a very important role in cell protection.
A parametric study of a 2.5 kW class propeller type micro hydraulic turbine was performed. In order to analyze the internal flow characteristics in the hydraulic turbine, three dimensional Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model were used and the hexahedral grid system was used to construct computational domain. To secure the reliability of the numerical analysis, the grid dependency test was performed using the grid convergence index method based on the Richardson extrapolation, and the grid dependency was removed when about 1.7 million nodes were used. For the parametric study, the axial distance at shroud span (L) between the inlet guide vane and the runner, and the inlet and outlet blade angles (β1, β2) of the runner were selected as the geometric parameters. The inlet and outlet angles of the runner were defined in the 3 spans from the hub to tip, and a total of 7 geometric parameters were investigated. It was confirmed that the outlet angles of the runner had the most sensitive effect on the power and efficiency of the micro hydraulic turbine.
Total magnetic field measurements were performed to study paleomagnetism of three seamounts (OSM7, OSM8-1, and OSM8-2) to the northwest of the Marshall Islands in the western Pacific. The study area is located at the Ogasawara Fracture Zone which is a boundary between the Pigafetta and East Mariana basins. The magnetic parameters and paleopoles of three seamounts were derived from inversion of the measured magnetic field. The goodness-of-fit ratio of OSM7 is too low to be included to the estimation of parameters. The complex magnetic anomalies of center, scarcity of flank rift zones and steep slope at OSM7 suggest that the multiple intrusions of magma converge into the center of volcanic edifice. Inclination calculated from the magnetic anomalies of OSM8-1 and OSM8-2 is $-41.2^{\circ}$, and the paleolatitude calculated from the inclination is $23.6^{\circ}S$. The corresponding paleopoles for OSM8-1 and OSM8-2 are $(24^{\circ}42'W,\;48^{\circ}54'N)\;and\;(18^{\circ}18'W,\;48^{\circ}30'N)$, respectively. In comparison with the apparent polar wander path (APWP) of the Pacific plate, the paleopoles are close to 129-Ma pole. The paleopoles and paleolatitudes of OSM8-1 and OSM8-2 suggest that they were formed at similar time and location. The seamounts have drifted northward about $41^{\circ}$ from the paleolatitude to present latitude of seamounts.
본 연구의 목적은 뇌졸중 환자의 족관절 저측굴근 경직에 대하여 Myotonometer와 surface Electromyography(sEMG)를 이용하여 경직의 정량적 평가에 유용한 지표를 알아보고, 이 지표들과 임상적으로 평가되는 modified Ashworth scale(MAS)과의 관계를 알아보고자 하였다. 족관절 저측굴근의 경직평가는 물리치료사 5명(임상경력 5년이상)이 MAS를 이용하여 MAS 2, 3, 4 해당 군에 각 5명씩을 무작위로 15명씩 배정하였다. 각 군의 조직탄성과 근활성 측정은 Myotonometer와 sEMG로 이완(relaxed)상태와 최대 수의적 수축(contracted)상태에서 측정하였다. 연구 결과, MAS 등급이 높아짐에 따라 이완과 수축상태 간의 조직저항도 전위차와 근활성도의 차이는 작아졌고, 상관관계 분석에서도 MAS 등급이 높아질수록 이완 시보다 수의적 수축 시 실린더가 받는 낮은 강도에서의 상관성이 더 높아짐을 확인할 수 있었다. 따라서 Myotonometer는 경직을 평가하는 방법으로 다양한 인체의 관절에 비교적 쉽게 적용할 수 있으며 경직의 변화를 민감하게 반영할 수 있어 보다 객관적이고 정량적인 경직의 평가 도구로 사용될 수 있을 것이다.
For better diagnosis and prescription in Korean traditional medicine, Lee Je-Ma (1837-1900) created Sasang Constitution classification which was divided into four groups of Taeyangin, Soyangin, Taeumin and Soumin based on both body shape and natural disposition. The purpose of this study was to investigate the characteristics of facial skin parameters (hydration, lipid and pH) on forehead and cheek according to Sasang Constitution classifications of Taeumin, Soyangin and Soumin in Korean. Eighty-nine Korean female subjects were recruited for this study and the average age of them was 19.9${\pm}$0.84 years. The four groups by the Sasang Constitution were classified by questionnaire for the Sasang Constitution classification proposed by Kyung-Hee Oriental Medicine Hospital. Consequently, thirty-eight (42.7%) among the subjects were grouped into Soumin, twenty-nine (32.6%) into Taeumin, twenty (22.5%) into Soyangin and two (2%) into Taeyangin. Taeyangin group was excluded from statistical analysis due to small subjects. Hydration, lipid and pH parameters on forehead and cheek were measured by using non-invasive instruments of Corneometer (CM 825, Schwarzhaup, Germany), Sebumeter (SM 815, Schwarzhaup, Germany) and Skin-pH-meter (pH 905, Schwarzhaup, Germany), respectively. The measurements by the same investigator were performed under standardized condition with a room temperature of $21^{\circ}C$ and a humidity level of 40% to 50%. As a result, hydration (F=25.481, p=.000), lipid (F=5.753, p=.005) and pH (F=5.010, p=.009) of the forehead skin showed significant differences in the order of Taeumin, Soyangin and Soumin. Hydration (F=23.216, p=.000), lipid (F=6.898 p=.002) and pH (F=5.070, p=.008) of the cheek skin showed significant differences in the order of Taeumin, Soyangin and Soumin. In conclusion, facial skin surface seemed to be dependent on Sasang Constitution classification in Korean. These findings indicated that Sasang Constitution classification might be an useful esthetic treatment for caring facial skin in the future.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.