The TIDE, finite element model for the simulation of tidal flow in shallow sea was tested for its applicability at the Saemangeum area. Several pre and post processors were developed to facilitate handling of the complicated and large amount of input and output data for the model developed. Also an operation scheme to run the model and the processors were established. As a result of calibration test using the observed data collected at 9 points within the region, linearlized friction coefficients were adjusted to be ranged 0.0027~0.0072, and water depths below the mean sea level at every nodes were changed to be increased generally by 1 meter. Comparisons of tidal velocities between the observed and the simulated for the 5 stations were made and obtained the result that the average relative error between simulated and observed tidal velocities was 11% for the maximum velocities and 22% for the minimum, and the absolute errors were less than 0.2m/sec. Also it was found that the average R.M.S. error between the velocities of observed and simulated was 0.119 m/sec and the average correlation coefficient was 0.70 showing close agreement. Another comparison test was done to show the result that R.M.S. error between the simulated and the observed tidal elevations at the 4 stations was 0.476m in average and the correlation coefficients were ranged 0.96~0.99. Though the simulated tidal circulation pattern in the region was well agreed with the observed, the simulated tidal velocities and elevations for specific points showed some errors with the observed. It was thought that the errors mainly due to the characteristics of TIDE Model which was developed to solve only with the linearized scheme. Finally it was concluded that, to improve the simulation results by the model, a new attempt to develop a fully nonlinear model as well as further calibration and the more reasonable generation of finite element grid would be needed.
Recently, the expansion of the domestic solar market due to the promotion of eco-friendly and alternative energy-related policies is promising, and it is expected to lead the high-efficiency/high-power module market based on M10 or larger cells to reduce LCOE, 540-560W, M12 based on M10 cells Compared to the existing technology with an output of 650-700W based on cells, it is necessary to secure competitiveness through the development of modules with 600W based on M10 cells and 750W based on M12 cells. For the development of high efficiency/high-power n-type bifacial, it is necessary to secure a lightweight technology and structure due to the increase in weight of the glass to glass module according to the large area of the module. Since the mechanical strength characteristics according to the large area and high weight of the module are very important, design values such as a frame of a new structure that can withstand the mechanical load of the Mechanical Load Test and the location of the mounting hole are required. In this study, a structural analysis design model was introduced to secure mechanical reliability according to the enlargement of the module area, and the design model was verified through the mechanical load test of the actual product. It can be used as a design model to secure the mechanical reliability required for PV modules by variables such as module area, frame shape, and the location and quantity of mounting holes of the structural analysis model verified. A relationship of output drop can be obtained.
The production and decomposition rate of litters from the three different locations, Quercus acutissium forest at 630 m, Q. mongolica forests at 1, 005m and 1, 490 m of Mt. Dokyoo, were estimated by Olson model. The contents of N, P, K, Ca and Na in soils were measured and the relationships among them were elucidated. The amounts of litter production in Q. mangolica were the lowest, 378.96g/$m^2$ at 1, 490 m and the highest, 876.12g/$m^2$ at 1, 005 m. And the amounts of litter production in Q. acutissima at 630 m was 686.16 g/$m^2$. The decay rate of litters in Q. mongolica was the smallest, 0.123 at 1, 490 m, and the largest, 0.222 at 1, 005 m. And that in Q. acutissima was 0.169 at 630 m which was the medium rate. The production and decay rate of litters decreased with the ascending altitude. The values at 630 m were maller than those at 1, 005 m. This might be due to the fact that the tree species at 630 m was Q. acutissima was 0.169 at 630 m which was the medium rate. The production and decay rate of litters decreased with the ascending altitude. The values at 630 m was Q. acutissima which was different from Q. mongolica at 1, 005 m and 1, 490 m. The half-0life of litter decay in Q. monglica was 5, 634 years at 1, 490 m and 3.134 years at 1, 005 m. And that in Q. acutissima was 4.132 years at 630 m. The decay rates of litters were tend to be inversely proportional to the ascending altitude. The annual standing stocks of mineral and their amounts returned to the soil were proportional to the decay rate of organic matters.
This study developed the ISM (Electronic Store Success Model) by basing upon the revised D&M IS Success Model and reflecting the characteristics of marketing and e business. The theoretical rationale of this model was as following : 1) Though the revised D&M IS Success Model (2002) must be more logical and complete model than the original D&M IS Success Model (1992), it did not reflect characteristics of marketing and e business. 2) In the marketing studios, Service Quality has been suggested as one of basic strategies for success. 3) In e business studies, Trust has been emerging as a potentially important antecedent of e loyalty. 4) There has been a paradigm shift from satisfaction to loyalty in marketing emphasis. 5) Nowadays, ERP (Enterprise Resource Planning) has been pervaded in many organizations and has supported PCA (Profit Center Accounting) or Channel based Accounting, so it has not been difficult to evaluate financial performance of Electronic Store. The ESM that has six dimensions (System Quality, information Quality. Service Quality, Trust, Loyalty, Financial Performance) and expresses the causal relationship among them was proposed and was compared with BSC (Balanced Scorecard), WebQual, and EWAM (Extended Web Assessment Method). The results showed that the ESM coincides with BSC and contains dimensions of WebQual, and EWAM.
자동차산업의 발전과 함께 M2M(Machine-to-Machine)통신이 자동차 산업분야에서 많은 관심이 되고 있다. M2M은 기상, 환경, 물류, 국방, 농.축산 등에서 사용하기 시작하여 장비들이 자동으로 상황에 맞추어 통신을 하고 상황에 맞는 동작을 함으로써 운영해가는 시스템이다. 자동차에서도 차량내부 장치 간, 차대 차, 차와 교통시설물, 차와 주변의 환경 등에 적용되고 있다. 그러나 통신시스템의 특성상 전송구간에서 공격자의 공격에 대한 문제가 있으며 자동차의 운행, 제어계통 및 엔진제어 등에 공격자의 공격이 진행되면 안전에 심각한 문제가 발생하게 된다. 따라서 디바이스 간 보안통신에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 차량의 디바이스간 안전한 통신을 위해 해시함수 및 수학적 복잡한 공식을 이용하여 프로토콜을 설계하였으며 프로토콜 정형검증 도구인 Casper/FDR을 이용하여 실험하였으며 제안한 프로토콜이 각종 공격에 안전하게 동작되며 실제 적용할 때 효과적임을 확인하였다.
본 연구에서는 대구광역시 서구 비산7동 지역을 배수구역으로 선정하여 집중호우발생시 유출특성을 모의하고, 침수피해를 저감시키기 위한 방안으로 지하저류조의 설치에 따른 침수피해 저감효과에 대한 분석을 실시하였다. SWMM 모형을 적용하여 2003년 태풍 '매미' 사상에 대한 유출해석을 실시하였으며, 유출해석을 통하여 계산된 월류량에 대한 2차원 침수모형을 적용한 침수해석을 통하여 2003년 당시의 침수흔적도와 침수해석 결과의 비교 및 검증을 실시하여 침수지역의 공간적 분포가 매우 유사한 양상을 보이고 있는 것을 확인하였다. 또한 지하저류조의 설치에 따른 침수피해 저감효과를 분석하기 위하여 동일한 강우조건을 가지고 대상유역에 대한 유출해석을 실시하여 월류된 유량에 대한 2차원 침수해석을 실시하여 침수피해 저감효과를 분석하였다. 지하저류조의 설치 및 크기에 따른 침수피해 저감효과를 분석한 결과 지하저류조의 높이가 1.7 m($120m{\times}180m{\times}1.7m$)인 경우 월류체적은 72%, 침수면적은 40.1% 감소하였고, 높이가 2.0m($120m{\times}180m{\times}2.0m$)인 경우 월류체적은 84.8%, 침수면적은 50.6% 감소하였으며, 높이가 2.2 m($120m{\times}180m{\times}2.2m$)인 경우 월류체적은 94%, 침수면적은 91.2% 감소하였고, 높이가 2.5 m($120m{\times}180m{\times}2.5m$)인 경우는 월류가 발생하지 않는 것으로 확인되었다. 지하 저류조의 크기와 위치에 따른 침수피해 저감영향에 대한 정량적 분석을 통하여 제시된 연구결과는 침수피해 방지를 위하여 경제적이고 사회적으로도 활용가치가 높은 지하저류조의 설치를 위한 충분한 기초자료가 될 것으로 기대된다.
Two-phase pressure drop experiments were performed during flow boiling to deionized water in a microchannel having a hydraulic diameter of $500{\mu}m$. Tests were made in the ranges of heat fluxes from 100 to $400kW/m^2$, vapor qualities from 0 to 0.2 and mass fluxes of 200, 400 and $600kg/m^2s$. The frictional pressure drop during flow boiling is predicted by using two models; the homogeneous model that assumes equal phase velocity and the separate flow model that allows a slip velocity between two phases. From the experimental results, it is found that the two phase multiplier decreases with an increase in mass flux. Measured data of pressure drop are compared to a few available correlations proposed for macroscale and mini/microscale. Among the separated flow models, the correlation model suggested by Lee and Garimella predicted the frictional pressure drop within MAE of 47.2%, which is better than other correlations.
$\beta$-Lactam antibiotics such as penicillin G, amoxicillin, and ampicillin were determined by a potentiometric biosensor system which exploited penicillinase immobilized on Immobilon cellulose nitrate membrane and a flat-bottomed pH electrode-as the biological component and transducer. The optimum reaction buffer for maximum sensitivity was found as 2 mM of sodium phosphate buffer (pH 7.2). The detection limit of the biosensor could be extended to 1 $\mu{M}$ of the analytes by increasing the enzyme loading for immobilization to 100 units/$m\ell$. The model samples spiked with each of the standard penicillins were measured for their biosensor responses and HPLC peak area, resulting in the relative responses of 82.1-103.5% and 79.5-106.1% for the biosensor method along with HPLC analysis, respectively. This result showed a good precision of the current biosensor method for screening the penicillin compounds.
Park, Sang-Wook;Lee, Jae-Wook;Kim, Sung-Soo;Choi, Byoung-Sik
한국응용과학기술학회지
/
제20권2호
/
pp.154-164
/
2003
This paper has applied a simple model to the mass transfer mechanism of Cr(VI) with crownether in a batch-type, supported liquid membrane module. Concentration at pH 3 are as follows : 0.012 kmol/$m^3{\le}$18-crown-6${\le}$0.036 kmol/$m^3$ and 20 g/$m^3{\le}$ Cr(VI)${\le}$500 g/$m^3$. The measured values of forward- and backward-reaction rate constants between Cr(VI) and 18-crown-6 were used to simulate the model with the mass conservation equation and associated boundary conditions. Comparison between the experimental and simulated facilitated factor of Cr(VI) transport led to classification of reaction regions.
본 논문에서는 M2M 단말들끼리의 송수신 과정에서 에너지 최적화 송수신 운용 방안을 제시한다. 최근의 통신응용 분야는 점점 더 많은 양의 밧데리를 소모하는 방향으로 진화하고 있으며, 따라서 제한된 용량의 밧데리를 사용하는 디바이스에 있어서 효과적인 밧데리 사용 방안은 점점 더 중요해지고 있다. 본 논문에서는 아직까지 많은 통신 응용분야에서 사용되어지고 있는 채널코딩 기술중 하나인 터보코드를 적용하여 송수신 단말들끼리 데이터 전송과 수신하는 과정에서 소모되는 에너지를 최적화한다. 먼저 송신시 소모되는 전송에너지와 수신시 소모되는 프로세싱 에너지를 모델링하고, 이를 바탕으로 에너지 효율적인 송수신 운용 방안을 제시한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.