• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.2
• /
• pp.70-76
• /
• 1984

In this paper, a functional m-redundant system, which is m-fault tolerant, is defined based on the graph-theory. This system is designed to be t(t$\geq$m) fault-diagnosable by comparing its unit's outcomes without additive test functions, so, the system down for diagnosis is not needed. The diagnostic model for this system is presented. It is to avail the redundancy of the system effectively. It is shown that this model can be converted into Preparata's model. Thus, the diagnostic characteristics of a functional m-redundant system is analyzed by the method originated by Preparata et al.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.204-208
• /
• 1991

Five models for net radiation estimation reported by Linacre(1968), Berljand(1956), Nakayama et al. (1983), Chang (1970) and Doorenbos et al. (1977) were tested for the adaptability to Korea. A new model with effective longwave radiation term parameterized by air temperature, solar radiation and vapor pressure was formulated and tested for its accuracy. Above five models with original parameter values showed large absolute mean deviations ranging from 0.86 to 1.64 MJ/$m^2$/day. The parameters of the above five models were reestimated by using net radiation and meteorological elements measured in Suwon, Korea. These five models with new parameter values showed absolute mean deviations ranging from 0.74 to 0.88 MJ/$m^2$/day. The following model was newly formulated: Rn=(1- $\alpha$) Rs- $\sigma$ $T_{k}$$^{4}$ (0.0103 Exp (0 .0731 Rs) -0.0475 (equation omitted) +0 .2478) ($R^2$=0.997, n=63) where $\alpha$ =albedo, $\sigma$=Stefan-Boltzmann constant, Rs=solar radiation in MJ/$m^2$/day, Tk =air temperature in Kelvin and $e_{a}$=vapor pressure in mb. This model revealed 0.4988 MJ/$m^2$/day in absolute mean deviation when applied to an independent set of meteorological data.a.a.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1258-1263
• /
• 1999

본 논문에서는 CRCW(Concurrent Read Concurrent Write)와 CREW(Concurrent Read Exclusive Write) PRAM(Parallel Random Access Machine) 모델에서 무방향성 그래프 G=(V, E)의 극대 매칭을 구하기 위해 간결한 랜덤 병렬 알고리즘을 제안한다. CRCW PRAM 모델에서 m개의 선을 가진 그래프에 대해, 제안된 매칭 알고리즘은 m개의 프로세서 상에서 {{{{ OMICRON (log m)의 기대 수행 시간을 가진다. 또한 CRCW 알고리즘을 CREW PRAM 모델에서 구현한 CREW 알고리즘은 OMICRON (log^2 m)의 기대 수행 시간을 가지지만,OMICRON (m/logm) 개의 프로세서만을 가지고 수행될 수 있다.Abstract This paper presents simple randomized parallel algorithms for finding a maximal matching in an undirected graph G=(V, E) for the CRCW and CREW PRAM models. The algorithm for the CRCW model has {{{{ OMICRON (log m) expected running time using m processors, where m is the number of edges in G We also show that the CRCW algorithm can be implemented on a CREW PRAM. The CREW algorithm runs in {{{{ OMICRON (log^2 m) expected time, but it requires only OMICRON (m / log m) processors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.3
• /
• pp.317-328
• /
• 2010

This paper describes the results of complete Bouguer anomalies computed from the Free-air anomalies that derived from Sandwell and DNSC08 marine gravity models. Complete bouguer corrections consist of three parts: the bouguer correction (Bullard A), the curvature correction (Bullard B) and the terrain correction (Bullard C). These all corrections have been computed over the East Sea on a $1'{\times}1'$elevation data (topography and bathymetry) derived from ETOPO1 global relief model. In addition, a constant topographic (sea-water) density of $2,670kg/m^3$($1,030kg/m^3$) has been used for all correction terms. The distribution of complete bouguer anomalies computed from DNSC08 are -34.390 ~ 267.925 mGal, and those from Sandwell are -32.446 ~ 266.967 mGal in East Sea. The mean and RMSE value of the difference between DNSC08 and Sandwell is $0.036{\pm}2.373\;mGal$. The highest value of complete bouguer anomaly are found around the region of $42{\sim}43^{\circ}N$ and $137{\sim}139^{\circ}E$ (has the lowest bathymetry) in both models. These values show that the gravity distribution of both models, DNSC08 and Sandwell, are very similar. They indicate that satellite-based marine gravity model can be effectively used to analyze the geophysical, geological and geodetic characteristics in East Sea.

• Analytical Science and Technology
• /
• v.10 no.1
• /
• pp.66-74
• /
• 1997

Influence of the axial dispersion on immobilized enzyme catalytic bed was investigated in order to examine the kinetic behavior of the biocatalysis. The enzyme employed in this study was the tyrosinase(EC 1.14.18.1) immobilized on carbon support : this system requires two substrates of phenol and oxygen. This enzyme has potential application for phenol degradation in waste water. A simulated reactor was a packed-bed reactor of 2.54cm in diameter and 10cm long, loaded with the immobilized carbon particle with an average diameter of $550{\mu}m$. A phenol feed in the strength of 55.5mM(5220ppm) was used to observe the behavior of the immobilized enzyme column at three different dissolved oxygen levels of 0.08445mM(2.7ppm), 0.1689mM(5.4ppm) and 0.3378mM(9.5ppm) with the flow rates in the range of 60(1mL/s) to 180mL/min(3mL/s). Examination of the Biot number and Damkolher numbers of the immobilized system enables us to eliminate the contribution of external mass transfer to set of differential equations derived from the dispersion model. Solution of the equation was finally obtained numerically with the application of the Danckwert boundary conditions and the assumed zero-and first order rates on the non-linear two substrate enzyme kinetics. Higher conversion of phenol was observed at the low flow rates and at the higher oxygen concentration. Comparison of axial dispersion and plug flow model showed that no detectable difference was observed in the column outlet conversion between the axial and the plug flow models which was in complete agreement with the previous studies.

• Journal of the Korean Society of Food Culture
• /
• v.2 no.1
• /
• pp.1-8
• /
• 1987

In order to develop a convenient Korean food service system in commercial kitchen, processing procedure and recipe of 10 kinds of Korean food to be served as a convenient foods were decided. Moving distance and required energy of laborer in the commercial and model restaurants which have the area of $62.8m^2$ and $32.4m^2$, respectively, were measured by arranging these machinery. The results obtained were summarized as follows. In case of restaurant with the area of $62.8m^2$, moving distance, working hours and required energy of laborers were 1,922m, 2,986min and 4,704kcal in C-store, 2,134m, 3,173min and 5,001.7kcal in T-store, and 1,704m, 2,808min and 4,414.5kcal in model restaurant, respectively. Therefore energy requirements of the model restaurant were less 289.5kcal (4.5%) and 587.2kcal (10.1%) than those of C and T store. In case of restaurant with the area of $32.4m^2$, moving distance, working hours and required energy of laborer in S store were 1,277m, 2,926min and 4,588kcal, 1,425m, 3,108min and 4,873.8kcal in H restaurant and 1,167m, 2,798min and 4,381.4kcal in model restaurant, respectively. Therefore energy requirements of the model restaurant were less 206.6kcal (4.7%) and 492.4kcal (11.2%) than those of S store and H restaurant. When 6 kinds of convenient foods and 4 kinds of direct cooking foods were produced, moving distance, working hours and required energy of laborer in S store were 554.7m, 972min and 1,586.0kcal, 684.7m, 991min and 1,579.2kcal in H restaurant, 523.1m, 938min and 1,479.5kcal in model restaurant. Therefore energy requirements of the model restaurant were less 99.7kcal(6.7%) and 106.5kcal(7.2%) than those of S store and H restaurant. In case of the energy saving system kitchen, moving distance and required energy were saved less by 42% and by 20.4% than those of model kitchen, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.461-467
• /
• 2012

An experimental study was carried out to measure frictional pressure drop in flow boiling to deionized water in a microchannel having a hydraulic diameter of $500{\mu}m$. Tests were performed in the ranges of heat fluxes from 100 to $400kW/m^2$, vapor qualities from 0 to 0.2 and mass fluxes of 200, 400 and $600kg/m^2s$. The frictional pressure drop during flow boiling is predicted by using two models; the homogeneous model that assumes equal phase velocity and the separate flow model that allows a slip velocity between two phases. From the experimental results, it is found that the two phase multiplier decreases with an increase in mass flux. Measured data of pressure drop are compared to a few available correlations proposed for macroscale and mini/microscale. The homogeneous model well predicted frictional pressure drop within MAE of 29.4 % for the test conditions considered in this work.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.67-76
• /
• 1988

A fully non-linear two-dimensional model for studying basic tidal dynamics within the Arabian Gulf has been formulated. The model extends to the east as far as continental shelf edge and has a mesh resolution of 1/12 degree latitude by 1/10 degree longitude. The developed model was used to investigate the distribution of dominant $M_2$, $S_2$, $K_1$, $O_1$ and $N_2$ tides adopting the open boundary tidal information from Schwiderski's global ocean tidal model. Computed co amplitude and cophase charts were presented independently and comparison between these charts and existing Admiralty tidal charts were made. Maximum bottom stress vector during the semidiurnal period due to $M_2$ and $M_4$ tides are also presented to suggest the possible direction of sediment movement in the region.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.299-304
• /
• 2013

A 17-run Box-Behnken design was used to optimize the synthesis conditions of a monolithic sorbent. The effects of the amount of monomer (mL), crosslink (mL) and porogen (mL) were investigated. The experimental data were fitted to a second-order polynomial equation by the multiple regression analysis and examined using statistical methods. The adjusted coefficient of determination ($R^2$) of the model was 0.9915. The probability value (p < 0.0001) demonstrated a high significance for the regression model. A mean amount of polymer as 2120.15 mg was produced under the following optimum synthesis conditions: the optimized volumes of monomer, crosslink and porogen are 0.30, 1.40, and 1.47 mL, respectively. This was in good agreement with the predicted model value.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.2
• /
• pp.73-80
• /
• 2014

Drug delivery in human upper airway was studied by the numerical simulation of oral airflow. We created an anatomically accurate upper airway model from CT scan data by using a medical image processing software (Mimics). The upper airway was composed of oral cavity, pharynx, larynx, trachea, and second generations of branches. Thin sliced CT data and meticulous refinement of model surface under the ENT doctor's advice provided more sophisticated nasal cavity models. With this 3D upper airway models, numerical simulation was conducted by ANSYS/FLUENT. The steady inspiratory airflows in that model was solved numerically for the case of flow rate of 250 mL/s with drug-laden spray(Q= 20, 40, 60 mL/s). Optimal parameters for mechanical drug aerosol targeting of predetermined areas was to be computed, for a given representative upper airways. From numerical flow visualization results, as flow-rate of drug-laden spray increases, the drag spray residue in oral cavity was increased and the distribution of drug spray in trachea and branches became more homogeneous.