• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.1005-1008
• /
• 2006

본 논문은 2.4 GHz대역 블루투스 시스템 및 무선랜 시스템을 효과적으로 구축하기 위해 필요한 다양한 실내 전파환경 데이터의 제공을 목적으로 한다. 측정 방법으로는 안테나의 송수신 방사특성을 측정하는 장비를 옥내에 설치하고, 전파경로에 각종 재질의 구조물을 설치하여 방사특성을 측정한다. 두께 25cm의 일반 시멘트벽을 투과할 경우의 감쇄를 측정 한 결과, 도달거리 1m 에서 약 $1\sim3dB$정도의 감쇄가 생김을 알 수 있었다. 또한 철골벽의 경우 철골 구조와 수평한 편파를 사용할 경우에는 감쇄가 증가하지만, 수직한 편파를 사용할 경우 철곡의 영향이 거의 없음을 알 수 있다.

• 대한원격탐사학회지
• /
• 제10권2호
• /
• pp.49-62
• /
• 1994

Look direction bias in a single look SAR image can often be misinterpreted in the geological application of radar data. This paper investigates digital processing techniques for SAR image data integration and compensation of the SAR data look direction bias. The two important approaches for reducing look direction bias and integration of multiple SAR data sets are (1) principal component analysis (PCA), and (2) wavelet transform(WT) integration techniques. These two methods were investigated and tested with the ERS-1 (VV-polarization) and CCRS*s airborne (HH-polarization) C-SAR image data sets recorded over the Sudbury test site, Canada. The PCA technique has been very effective for integration of more than two layers of digital image data. When there only two sets of SAR data are available, the PCA thchnique requires at least one more set of auxiliary data for proper rendition of the fine surface features. The WT processing approach of SAR data integration utilizes the property which decomposes images into approximated image ( low frequencies) characterizing the spatially large and relatively distinct structures, and detailed image (high frequencies) in which the information on detailed fine structures are preserved. The test results with the ERS-1and CCRS*s C-SAR data indicate that the new WT approach is more efficient and robust in enhancibng the fine details of the multiple SAR images than the PCA approach.

• 대한전기학회논문지
• /
• 제43권2호
• /
• pp.303-311
• /
• 1994

Optimum conditions for the deposition of N-docosylquinolium-TCNQ ultrathin organic films using the Langmuir-Blodgett etchnique and the molecular orientation and alignment of the LB films were studied. The $\pi$-A isotherm of the N-docosylquinolium-TCNQ was measured at the air-water interface varying with the subphase temperature, subphase pH, compressing speed and amounts of solutions for spreading. The LB film was deposited under the surface pressure of 30mN.m and 45mN/m and other deposition conditions. The molecular orientation and alignment of the LB films were studied by the polarization absorption technique. The $\pi$-A isotherm showed that the stable N-docosylquinolium -TCNQ monolayer was formed on the water surface at the condition of 25$^{\circ}C$,pH 5.6, molecular density of 2.1${\times}$10S014T~2.6${\times}$10S014T/cmS02T. The LB film was deposited under the surface pressure of 45mN/m had better packing density, orientation and alignment than the film of 30mN/m.

• 한국정보통신학회논문지
• /
• 제11권3호
• /
• pp.570-576
• /
• 2007

본 연구에서는 field-dependent polarization 모델과 square-law FET 모델을 이용하여 Metal- ferroelectic-semiconductor FET (MFSFET) 소자의 특성을 연구하였다. 게이트 전압에 따른 드레인 전류특성에서 강유전체 박막의 항전압이 0.5 와 1 V 일 때, 각각 1와 2 V의 메모리 창 (memory window) 을 나타내었다. 드레인 전류-드레인 전압곡선에서 두 부분의 문턱전압에 의해 나타난 포화 드레인 전류차이는 게이트 전압이 0, 0.1, 0.2, 0.3 V 일 때, 각각 1.5, 2.7, 4.0, 5.7 mA로 명확한 차이를 나타내었다. PLZT(10/30/70), PLT(10), PZT(30/70) 박막의 이력곡선 시뮬레이션과 리텐션 특성의 fitting 결과를 바탕으로 시간경과 후의 드레인 전류를 분석한 결과, PLZT(10/30/70) 박막이 10년 후에도 약 18%의 포화 전류가 감소하는 가장 우수한 신뢰성을 나타내었다.

• 한국광학회지
• /
• 제25권6호
• /
• pp.340-345
• /
• 2014

본 논문에서는 금이 증착된 측면연마 광섬유를 $2{\mu}m$ 대역 편광기로 이용하여 Thulium/Holmium 첨가 광섬유 기반 링 캐비티로부터 모드 잠금 레이저를 구현할 수 있음을 실험적으로 보였다. 모드 잠금 현상은 광섬유로 구성된 공진기 내부에서 진행하는 빔이 겪는 Nonlinear Polarization Rotation 현상에 기반하여 삽입된 금 증착 측면연마 광섬유에서 발생되는 Nonlinear Transmission 반응에 의해 유도되었다. 또한 공진기로부터 발생되는 출력 $1.93{\mu}m$ 파장의 광펄스를 Thulium/Holmium 첨가 광섬유 증폭기를 통과시켜 Higher Order Soliton Effect를 통해 압축시킴으로써 최대 첨두 출력 ~6.7 kW를 갖는 펄스폭 ~558 fs의 고출력 펨토초 펄스를 얻을 수 있음을 실험적으로 보였다.

• Corrosion Science and Technology
• /
• 제16권5호
• /
• pp.257-264
• /
• 2017

Film of new Ti-15Zr-5Nb alloy formed during galvanic anodizing in orthophosphoric acid solution was characterized by optical microscope, scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and Raman micro-spectroscopy. Its anticorrosive properties were determined by electrochemical techniques. The film had a layer with nanotube-like porosity with diameters in 500-1000 nm range. The nano layer contained significant amounts of P and O as well as alloying element. Additionally, Raman micro-spectroscopy identified oxygen as oxygen ion in $TiO_2$ anatase and phosphorous as $P_2O_7{^{4-}}$ ion in phosphotitanate compound. All potentiodynamic polarization curves in artificial Carter-Brugirard saliva with pH values (pH= 3.96, 7.84, and 9.11) depending on the addition of 0.05M NaF revealed nobler behavior of anodized alloy and higher polarization resistance indicating the film is thicker and more compact nanolayer. Lower corrosion rates of the anodized alloy reduced toxicity due to less released ions into saliva. Bigger curvature radii in Nyquist plot and higher phase angle in Bode plot for the anodized alloy ascertain a thicker, more protective, insulating nanolayer existing on the anodized alloy. Additionally, ESI results indicate anodized film consists of an inner, compact, barrier, layer and an outer, less protective, porous layer.

• 한국광학회지
• /
• 제5권2호
• /
• pp.278-285
• /
• 1994

가시광 디이오드 레이저의 온도와 주입 전류에 따른 발진 스펙트럼의 특성을 분석하고 주입-잠금 실험을 수행하여 잠금 특성을 분석하였다. 다이오드 레이저의 온도와 주입전류에 따른 스펙트럼 분석 결과 모드 도약이 일어나는 것을 관찰할 수 있었으며 모드 도약이 일어나지 않는 영역에서의 온도와 주입 전류의 변화에 대한 주파수 변화율이 각각 약 $33 GHz/^{\circ}C$, 6.6 GHz/mA로 나타남을 알 수 있었다. 일반적인 근적외선 AlGaAs 다이오드 레이저에서 순간적인 모드 도약이 일어나는 것과는 달리 가시광 다이오드 레이저는 모드 도약의 영역이 넓고 다중 모드로 동작하여 불량한 스펙트럼을 나타냈다. 이러한 특성을 갖는 다이오드 레이저를 이용한 주입-잠금 실험 결과 주입 강도가 $0~25\muW$에 대하여 잠금 대역폭은 0~5 GHz로 나타남을 알 수 있었다. 또한 주입 강도를 약 $25\muW$로 고정시키고, 편광 방향을 회전시키며 주입-잠금 대역폭을 측정한 결과 편광 방향에 의존함을 알 수 있었다. 주입-잠금된 광파의 위상 변화를 측정하기 위하여 주 레이저와 종 레이저를 간섭시켜 종 레이저의 주입 전류의 변화에 대한 간섭 무늬의 이동으로 위상의 변화를 조사하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.159-159
• /
• 2017

Ti-6Al-4V alloy have been used for dental implant because of its excellent biocompatibility, corrosion resistance, and mechanical properties. However, the integration of such implant in bone was not in good condition to achieve improved osseointergraiton. For solving this problem, calcium phosphate (CaP) has been applied as coating materials on Ti alloy implants for hard tissue applications because its chemical similarity to the inorganic component of human bone, capability of conducting bone formation and strong affinity to the surrounding bone tissue. Various metallic elements are known to play an important role in the bone formation and also affect bone mineral characteristics. Especially, Zn is essential for the growth of the human and Zn coating has a major impact on the improvement of corrosion resistance. Plasma electrolytic oxidation (PEO) is a promising technology to produce porous and firmly adherent inorganic Zn containing TiO2(Zn-TiO2)coatings on Ti surface, and the a mount of Zn introduced in to the coatings can be optimized by altering the electrolyte composition. In this study, effect of Zn content on the corrosion behavior of Ti-6Al-4V alloy after plasma electrolytic oxidation were studied by SEM, EDS, XRD, AC impedance, and potentiodynamic polarization test. The potentiodynamic polarization and AC impedance tests for corrosion behaviors were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67 mV/s and potential range from -1500 mV to +2000 mV. Also, AC impedance was performed at frequencies ranging from 10 MHz to 100 kHz for corrosion resistance.

• Corrosion Science and Technology
• /
• 제10권1호
• /
• pp.13-23
• /
• 2011

The inhibitive action of thiadiazolopyrimidines on mild steel in 1 M $H_{2}SO_{4}$ has been studied using weight loss, gasometric studies and electrochemical polarization and AC impedance measurements. The effect of temperature on the corrosion behaviour of mild steel in 1 M $H_{2}SO_{4}$ with optimum concentration of inhibitors was studied in the temperature ranging from 313-333K The adsorption of the inhibitor on the surface of mild steel was found to be exothermic, spontaneous and followed the mechanism of physisorption. The adsorption of these compounds on mild steel surface was found to obey Langmuir adsorption isotherm. The protective film formed on the surface of mild steel by the adsorption of inhibitor in 1 M $H_{2}SO_{4}$ solution was confirmed by optical microscopic technique. Synergistic effect of halide ions on mild steel in 1 M $H_{2}SO_{4}$ was studied by weight loss technique.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.923-929
• /
• 2006

Single crystalline ZnO films were successfully grown on R-plane sapphire substrates by plasma-assisted molecular beam epitaxy. Epitaxial relationship between the ZnO film and the R-plane sapphire was determined to be $[-1101]Al_2O_3{\parallel}[0001]ZnO,\;[11-20]Al_2O_2{\parallel}[-1100]ZnO$ based on the in-situ reflection high-energy electron diffraction analysis and confirmed again by high-resolution X-ray diffraction measurements. Grown (11-20) ZnO films surface showed mound-like morphology along the <0001>ZnO direction and the RMS roughness was about 4 nm for $2{\mu}m{\times}2{\mu}m$ area.