• Advances in concrete construction
• /
• v.2 no.4
• /
• pp.301-308
• /
• 2014

The present research work is on the effect of sawdust ash (SDA) on the mechanical strengths of self compacting concrete (SCC) using naphthalene sulfonate (NS) as a plasticizer. Experiments on compressive, flexural and splitting tensile strengths are conducted and the data analyzed using the Minitab 15 software. The results showed that SDA can defer the reaction of cement hydration and prolong the setting times of cement paste. This was very much pronounced on the flexural and splitting tensile strengths at 90 days of curing which are 36 % and 33 % higher than the control strengths, respectively. The study has proposed strength relations of mortar compressive strength with the flexural and splitting tensile strengths and these are, 5 and 7 times respectively. The flexural strength is 1.5 times that of the splitting tensile. Finally, linear models were developed on these relationships.

• Journal of the Korean Mathematical Society
• /
• v.55 no.1
• /
• pp.83-99
• /
• 2018

We introduce the concept of multiplicatively closed subsets of a commutative ring R which split an R-module M and study factorization properties of elements of M with respect to such a set. Also we demonstrate how one can utilize this concept to investigate factorization properties of R and deduce some Nagata type theorems relating factorization properties of R to those of its localizations, when R is an integral domain.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.6
• /
• pp.1989-2000
• /
• 2013

We show that for any given closed orientable 3-manifold M with a Heegaard surface of genus g, any positive integers b and n, there exists a knot K in M which admits a (g, b)-bridge splitting of distance greater than n with respect to the Heegaard surface except for (g, b) = (0, 1), (0, 2).

• Computers and Concrete
• /
• v.18 no.2
• /
• pp.165-178
• /
• 2016

The present work is concerned with a numerical investigation of the behaviour of reinforced-concrete beams with non-bonded flexural tension reinforcement. The numerically-established behaviour of such beams with and without transverse reinforcement is compared with its counterpart of similar beams with bonded reinforcement. From the comparison, it is found that the development of bond anywhere within the shear span inevitably leads to inclined cracking which is the cause of 'shear' failure. On the other hand, the lack of bond within the shear span of the beams is found, not only to prevent cracking within the shear span, but, also, to lead to a flexural type of failure preceded by the formation of horizontal splitting of concrete in the compressive zone. It is also found that delaying the extension of horizontal splitting through the provision of transverse reinforcement in the beam mid span can lead to flexural failure after yielding of the tension reinforcement. Yielding of the tension reinforcement before the horizontal splitting of the compressive zone may also be achieved by reducing the amount of the latter reinforcement.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.2
• /
• pp.93-99
• /
• 1986

A longline is made of many snoods with baited hooks which are connected to mainline at constant intervals. Hauling the mainline, removing the unused baits and the hooked fish, and the arrangement of hooks are dependent on mainly manual labour as compared with mechanized other fishing gear in fishing operation. The mechanization for longline operation is needed in order to eliminate the manual handling and to shorten the labour time. The magnetic hook splitting apparatus which consists of the hook separator and the guide leading to storage magazine rail was devised for the mechanization of hauling operation. The experiments were carried out in order to measure the splitting rate of hooks in accordance with the hauling speed of mainline and magnetic flux density of splitting apparatus from February to November, 1985. The splitting rate was $94\%$ for the Alaska pollack (Theragra chalcogramma) hook and $96\%$ for the halibut (Paralichthys olivaceus) hook at the hauling speed 24 m/min and magnetic flux density 482 gauss. The unsplitting of hooks was caused by entangling snood in the mainline and low magnetic flux density. The rate is greater the faster hauling speed and the lower magnetic flux density, with an average of about $6\%$, The magnetic flux density needed to hook splitting becomes increased with the increasing hauling speed. When the practical hauling speed is from 20 to 35m/min, the magnetic flux density is needed from 400 to 850 gauss.

• Kyungpook Mathematical Journal
• /
• v.59 no.3
• /
• pp.563-589
• /
• 2019

Let W and V be manifolds of dimension m + 2, M a locally flat submanifold of V whose dimension is m. Let $f:W{\rightarrow}V$ be a homotopy equivalence. The problem we study in this paper is the following: When is f homotopic to another homotopy equivalence $g:W{\rightarrow}V$ such that g is transverse regular along M and such that $g{\mid}g^{-1}(M):g^{-1}(M){\rightarrow}M$ is a simple homotopy equivalence? $L{\acute{o}}pez$ de Medrano (1970) called this problem the weak h-regularity problem. We solve this problem applying the codimension two surgery theory developed by the author (1973). We will work in higher dimensions, assuming that $$m{\geq_-}5$$.

• Computers and Concrete
• /
• v.33 no.3
• /
• pp.265-273
• /
• 2024

Predicting fracture properties requires an understanding of structural failure behaviour in relation to specimen type, dimension, and notch length. Facture properties are evaluated using various testing methods, wedge splitting test being one of them. The wedge splitting test was numerically modelled three dimensionally using the finite element method on self compacting concrete specimens with varied specimen and notch depths in the current work. The load - Crack mouth opening displacement curves and the angle of rotation with respect to notch opening till failure are used to assess the fracture properties. Furthermore, based on the simulation results, failure curve was built to forecast the fracture behaviour of self-compacting concrete. The fracture failure curve revealed that the failure was quasi-brittle in character, conforming to non-linear elastic properties for all specimen depth and notch depth combinations.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.725-733
• /
• 2022

This study applied a hydraulic rock splitting system equipped with a hybrid packer to the bench-cut method. The hybrid packer system is an improvement of the packer developed in previous studies; it is designed efficiently to reduce vibration and noise during rock excavation by combining the two functions of inducing hydraulic fractures using injection pressure and then expanding and extending them using a rubber packer. Field experiments assessed the efficiency of rock excavation with respect to the injection conditions; the adjusted experimental conditions included the distance from the free surface and the test holes drilled at the top of the slope and the injection settings. Using a separation of 5 m left some unexcavated parts, but using a separation of 1 m left no unexcavated parts. The hydraulic fractures generated by the injection pressure developed generally parallel to the free surface and expanded and extended as the rubber packer expanded, thus facilitating bench-cut excavation. For hydraulic rock splitting to be broadly applicable to bench-cut rock excavation, it is important to accumulate results from many field experiments conducted under varying experimental conditions for various types of rockmass.

• Korean Journal of Environmental Biology
• /
• v.23 no.1
• /
• pp.52-56
• /
• 2005

Eight days grown barley seedlings were treated with dimethipin for 72 hours and then the content of chlorophyll and photosynthetic electron activities of isolated chloroplasts were investigated. At the treatment of 10/sup -5/ M dimethipin the content of chlorophyll was decreased to 33% at 72 hours. Seven days etiolated barley seedlings were exposed to the light while dimethipin was added. At the time of 48 hours' greening chlorophyll content was reduced to 43% at 10/sup -4/M dimethipin and the chlorophyll a/b ratio was increased. In photosynthetic electron transport the activity of PSⅡ+PSⅠ was decreased to 10% at 48 hours and 25% at 72 hours at 10/sup -4/ M dimethipin. In the treatment of 10/sup -4/ M dimethipin the activity of PSⅡ+PSⅠ, except water splitting system was inhibited to 16% at 48 hours and 27% at 72 hours. The activity of PSⅡ was inhibited to 8% at 24 hours, 13% at 48 hours and 18% at 72 hours at 10/sup -4/ M dimethipin. The activity of PSⅠ was inhibited to 4% at 24 hours, 8% at 48 hours and 10% at 72 hours at 10/sup -4/ M dimethipin. In the times of greening of 7 days etiolated barley seedlings the activities of PSⅡ+PSⅠ were reduced to 5, 10, 10 and 11 % at 6, 12, 24, and 48 hours, respectively, at 10/sup -4/ M dimethipin. On the other hand, the activity of PSⅡ+PSⅠ except water splitting system, was not inhibited at all incubated hours in 10/sup -4/M dimethipin and there were no clear changes of the activities of PSⅡ and PSⅠ as compared to the control. Therefore, it could be concluded that dimethipin inhibited the photosynthetic electron activity by affecting the function of chloroplast rather than the synthesis of chloroplast and the inhibited function of chloroplast seems to come from the severe decrease of chlorophyll content.

• Advances in Energy Research
• /
• v.2 no.1
• /
• pp.33-45
• /
• 2014

Photocatalytic hydrogen generation by water splitting ($H_2O_{(1)}{\rightarrow}H_2_{(g)}+1/2O_2_{(g)}$) has been studied on photocatalysts based on Zn, Cd, Fe and Cu, synthesized by coprecipitation. Iron and copper nanoparticles were incorporated as cocatalysts to enhance the photocatalytic activity of the ZnCd solid solution. The effect of the different synthesis parameters (temperature, elemental atomic ratios, amount of Cu and Fe incorporated in the catalyst and calcination temperature) on the photocatalytic production of hydrogen has been studied in order to determine the best experimental synthesis conditions. The catalysts have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and BET. The experiments of photocatalytic water splitting were performed in aqueous solution of the photocatalysts previously dispersed in a soft ultrasound bath. The photocatalysts were irradiated under different lights ranging from 220 to 700 nm. The photocatalytic activity was found to be clearly dependent on the specific area of the photocatalyst.