• 제목/요약/키워드: M-power class (N)

검색결과 38건 처리시간 0.03초

1-비트 4차 델타-시그마 변조기법을 이용한 D급 디지털 오디오 증폭기 (Class-D Digital Audio Amplifier Using 1-bit 4th-order Delta-Sigma Modulation)

  • 강경식;최영길;노형동;남현석;노정진
    • 대한전자공학회논문지SD
    • /
    • 제45권3호
    • /
    • pp.44-53
    • /
    • 2008
  • 본 논문에서는 휴대용 오디고 제품의 헤드폰 구동을 위한 델타-시그마 변조기법 기반의 D급 증폭기를 제안한다. 제안된 D급 증폭기는 고성능 단일 비트 4차 델타-시그마 변조기를 이용하여 펄스폭 변조 신호를 발생시킨다. 높은 신호 대 잡음비를 얻는 것과 동시에 시스템의 안정성 확보를 위하여 시뮬레이션을 통해 변조기 루프필터의 폴과 제로를 최적화하였다. 테스트 칩은 $0.18{\mu}m$ CMOS 공정으로 제작되었다. 칩 면적은 $1.6mm^2$ 이며, 20Hz 부터 20kHz까지의 신호대역을 대상으로 동작한다. 3V 전원전압과 32옴의 로드를 사용하여 측정된 출력은 0.03% 이하의 전고조파 왜율을 갖는다.

디지털 입력 시그마-델타 변조 기반의 D급 오디오 증폭기 (A Digital Input Class-D Audio Amplifier)

  • 조준기;노진호;정태성;유창식
    • 대한전자공학회논문지SD
    • /
    • 제47권11호
    • /
    • pp.6-12
    • /
    • 2010
  • 본 논문에서는 시그마-델타 변조기에 기반 한 D급 오디오 증폭기를 제안한다. 16-비트 병렬의 디지털 입력신호는 4-차 디지털 시그마-델타 변조기에 의해 2-비트의 신호로 직렬화되고, 이 신호는 4-차 아날로그 시그마-델타 변조기로 인가된다. 아날로그 시그마 델타 변조기의 출력단의 파워 스위치는 3-레벨로 동작하며, 3-레벨의 펄스 밀도 변조(PDM) 출력 신호는 LC-필터를 통해 저역 통과되어 스피커에 전달된다. 아날로그 시그마-델타 변조기의 첫 단의 적분기는 디지털 시그마-델타 변조기의 출력으로부터 샘플된 이산 시간 영역의 신호를 입력으로 받아들이고, 동시에 파워 스위칭 단의 연속 시간 영역의 출력 신호를 부궤환(feedback) 받기 위해 스위치드-캐패시터 적분기와 연속시간 영역의 적분기를 혼합된 형태로 구현되었다. 제안된 클래스-D 오디오증폭기는 CMOS 0.13-um 공정을 이용해 제작되었으며 100-Hz 부터 20-kHz의 신호 주파수 영역에서 동작한다. 제작된 D급 오디오 증폭기는 4-${\Omega}$ 부하 저항에서 최대 18.3-mW을 내고 0.035-%의 전고조파 왜율(total harmonic distortion pluse noise : THD+N) 성분과 80-dB의 입력신호 대역폭(dynamic range)을 갖는다. 아날로그 및 디지털 변조기는 1.2-V 전원 전압으로 동작하며 총 457-uW의 전력을 소모한다.

Design of Main Body and Edge Termination of 100 V Class Super-junction Trench MOSFET

  • Lho, Young Hwan
    • 전기전자학회논문지
    • /
    • 제22권3호
    • /
    • pp.565-569
    • /
    • 2018
  • For the conventional power MOSFET (metal-oxide semiconductor field-effect transistor) device structure, there exists a tradeoff relationship between specific on-state resistance (Ron,sp) and breakdown voltage (BV). In order to overcome this tradeoff, a super-junction (SJ) trench MOSFET (TMOSFET) structure with uniform or non-uniform doping concentration, which decreases linearly in the vertical direction from the N drift region at the bottom to the channel at the top, for an optimal design is suggested in this paper. The on-state resistance of $0.96m{\Omega}-cm2$ at the SJ TMOSFET is much less than that at the conventional power MOSFET under the same breakdown voltage of 100V. A design methodology for the edge termination is proposed to achieve the same breakdown voltage and on-state resistance as the main body of the super-junction TMOSFET by using of the SILVACO TCAD 2D device simulator, Atlas.

중학교 2학년 학생들의 지수법칙 발견을 위한 교수 설계 및 적용 (Design of Instruction Helping 8th Grade Students Discover the Power Laws and its Application)

  • 강정기
    • 대한수학교육학회지:수학교육학연구
    • /
    • 제27권2호
    • /
    • pp.171-189
    • /
    • 2017
  • 본 연구는 학생의 지수법칙 개발을 골자로 하는 교수법을 설계 및 적용해봄으로써 수업의 실제를 파악해 보고자 하였다. 이를 위해 중학교 2학년 54명의 학생을 대상으로 지수법칙에 대한 발견식 수업을 계획하여 적용해 보았다. 그 결과 지수법칙 사례 개발측면에서는 단조로운 법칙의 과다 생산, 선행학습의 경험이 없는 학생일수록 개발 유형이 다양하며 오류 가능성이 높아지는 경향, 여러 형태의 오류 등을 목격할 수 있었다. 법칙의 일반화와 표현 측면에서는 $a^m{\div}a^n$ 유형의 일반화 표현에 모두 실패하였으며, 밑이나 지수 중 하나만 문자로 일반화한 표현이 적지 않게 등장하였다. 또한 일반성이 제한된 오류나 변수와 등호를 사용하지 않은 표현 오류를 접할 수 있었다. 수업의 설문에서는 창조의 막연함을 호소하는 입장과 창조의 즐거움을 이야기하는 상반된 두 입장이 있었다. 이러한 결과에 기초하여 지수법칙 발견과 관련한 교수학적 시사점에 대해 논의하였다.

Studying the $SrTiO_3$: Pr cathode-luminescence

  • Kargin, N.I.;Vorobiev, V.A.;Sinelnikov, B.M.;Kuznetsov, U.V.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.268-269
    • /
    • 2006
  • The estimation of applicability $SrTiO_3:Pr^{3+}$, Al to a class low-voltage flat-panel displays based on field emission effect, which have average value anode voltage $U_a=300V$ and current density $j=100\;mA/sm^2$ at duty 240, has given positive result. In the same time observably for the most effective sample in similar conditions of excitation high brightness - more than $500\;Kd/m^2$ and linear brightness dependences from current density and voltage allows to decrease greatly the power which consumed by the device.

  • PDF

On Testing Exponentiality Against HNRBUE Based on Goodness of Fit

  • Mahmoud, M.A.W.;Diab, L.S.
    • International Journal of Reliability and Applications
    • /
    • 제8권1호
    • /
    • pp.27-39
    • /
    • 2007
  • Based on goodness of fit new testing procedures are derived for testing exponentiality against harmonic new renewal better than used in expectation (HNRBUE). For this aging properties, a nonparametric procedure (U-statistic) is proposed. The percentiles of this test statistic are tabulated for sample sizes n=5(1)30(10)50. The Pitman asymptotic efficiency (PAE) of the test is calculated and compared with, the (PAE) of the test for new renewal better than used (NRBU) class of life distribution [see Mahmoud et al (2003)]. The power of this test is also calculated for some commonly used life distributions in reliability. The right censored data case is also studied. Finally, real examples are given to elucidate the use of the proposed test statistic in the reliability analysis.

  • PDF

CMOS 저잡음 기가비트급 광전단 증폭기 설계 (CMOS Gigahertz Low Power Optical Preamplier Design)

  • 황용희;강진구
    • 전기전자학회논문지
    • /
    • 제7권1호
    • /
    • pp.72-79
    • /
    • 2003
  • 일반적으로 p-i-n Photodiode 수신기의 광신호처리 전단증폭기의 설계에서 공통소스 입력단을 사용하는 트랜스임피던스(Transimpedance)구조로 설계한다. 본 논문에서는 공통게이트 입력단을 사용하는 전류모드 광전단증폭기를 설계하였다. 이러한 광전단증폭기로 사용되는 전류모드 공통게이트 트랜스임피던스 증폭기의 특징은 높은 이득과 높은 대역폭을 동시에 얻을 수 있다는 것이다. 본 논문에서는 광전단 증폭기 설계에서 잡음 최적화를 이용하여 설계과정을 자동화 시킴으로써 보다 단순하게 트랜스임피던스 증폭기를 설계하는 기법을 제시하였다. 그리고 커패시턴스 피킹(Capacitive Peaking) 기술을 사용하여 대역폭을 더욱 증가시킬 수 있다. 제안하는 기법을 사용하여 설계된 전류모드 광전단 증폭기에 캐패시턴스 피킹을 적용하여 0.35um CMOS 공정을 사용할 경우 대역폭이 1.57GHz이고, 트랜스임피던스 이득이 2.34k, 입력 잡음전류가 470nA이고 입력 잡음 전류의 주파수밀도(spectral density)가 6.13pA/ 인 저 잡음의 고속 전류모드 트랜스임피던스 광전단증폭기를 설계 하였다. 시뮬레이션 결과 제안된 광전단증폭기의 전력소비는 3.3V 공급전압에서16.84mW이었다.

  • PDF

A CMOS Rail-to-Rail Current Conveyer and Its Applications to Current-Mode Filters

  • Kurashina, Takashi;Ogawa, Satomi;Watanabe, Kenzo
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -2
    • /
    • pp.755-758
    • /
    • 2002
  • This paper presents a second-generation CMOS current conveyor (CCII) consisting of a rail-to-rail complementary N- and P-channel differential input stage for the voltage input, a class AB push-pull stage for the current input, and current mirrors far the current outputs. The CCII was implemented using a double-poly triple-metal 0.6 ${\mu}$m n-well CMOS process, to confirm its operation experimentally. A prototype chip achieves a rail-to-rail swing ${\pm}$2.4 V under ${\pm}$2.5 V power supplies and shows the exact voltage and current following performances up to 100 MHz. Because of its high performances, the CCII proposed herein is quite useful for a building block of current-mode circuits. The applications of the proposed CCII to current-mode filters are also described.

  • PDF

Comparing the empirical powers of several independence tests in generalized FGM family

  • Zargar, M.;Jabbari, H.;Amini, M.
    • Communications for Statistical Applications and Methods
    • /
    • 제23권3호
    • /
    • pp.215-230
    • /
    • 2016
  • The powers of some tests for independence hypothesis against positive (negative) quadrant dependence in generalized Farlie-Gumbel-Morgenstern distribution are compared graphically by simulation. Some of these tests are usual linear rank tests of independence. Two other possible rank tests of independence are locally most powerful rank test and a powerful nonparametric test based on the $Cram{\acute{e}}r-von$ Mises statistic. We also evaluate the empirical power of the class of distribution-free tests proposed by Kochar and Gupta (1987) based on the asymptotic distribution of a U-statistic and the test statistic proposed by $G{\ddot{u}}ven$ and Kotz (2008) in generalized Farlie-Gumbel-Morgenstern distribution. Tests of independence are also compared for sample sizes n = 20, 30, 50, empirically. Finally, we apply two examples to illustrate the results.

RLC 연결선의 버퍼 삽입 방법 (A Buffer Insertion Method for RLC Interconnects)

  • 김보겸;김승용;김석윤
    • 대한전자공학회논문지SD
    • /
    • 제41권2호
    • /
    • pp.67-75
    • /
    • 2004
  • 본 논문은 인덕턴스 성분을 포함한 단일 도선 및 트리 구조 RLC 연결선의 버퍼 삽입 방법을 제시한다. 이를 위해 먼저 CMOS 버퍼가 구동하는 단일 RLC 도선에 대한 시간 지연의 대수식을 제시한다. 이 수식은 현재의 서브마이크로미터 공정을 위한 n-th power law 기반에서 유도되었으며, 다양한 RLC 부하를 가지고 실험해 본 결과, 실제 SPICE 시뮬레이션 결과에 비해 최대 9% 오차를 갖는 것으로 나타났다. 본 논문은 이 지연 시간 수식을 바탕으로 단일 도선 RLC 연결선을 여러 개로 나누는 버퍼 삽입에 관한 수식과 RLC 트리 연결선의 시간 지연을 최적화하기 위해 삽입될 버퍼의 사이즈를 결정하는 알고리듬을 제시한다. 제시된 버퍼 삽입 알고리듬은 0.25㎛ CMOS 공정의 트리 연결선에 적용하였으며, HSPICE 결과를 이용하여 정확도를 검증하였다.