• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1538-1544
• /
• 2006

This paper proposes a non-systolic parallel $AB^2+C$ Computing unit based on irreducible AOP order m of $GF(2^m)$. Proposed circuit have only AND gates and EX-OR gates, composes of cyclic shift operation, multiplication operation power operation power-sum operation and addition operation using a merry irreducible AOP. Suggested operating a method have an advantage high speed data processing, low power and integration because of only needs AND gates and EX-OR gates. $AB^2+C$ computing unit has delay-time of $T_A+(1+[log^m_2])T_X$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.252-252
• /
• 2008

The microhotplates consisting of a Pt-ased heating element on AlN/poly 3C-SiC layers were fabricated. The microhotplate has a $600{\mu}m{\times}600{\mu}m$ square shaped membrane which made of $1{\mu}m$ thick ploycrystalline 3C-SiC suspended by four legs. 3C-SiC is known for excellent chemical durability, mechanical strength and sustaining of high temperature. The membrane is fabricated by surface micromachining using oxidized Si sacrificial layer. The Pt thin film is used for heating material and resist temperature sensor. The fabrication methodology allows intergration of an array of heating material and resist temperature detector. For reasons of a short response time and a high sensitivity a uniform temperature profile is desired. The dissipation of microhotplate was examined by a IR thermoviewer and the power consumption was measured. Measured and simulated results are compared and analyzed. Thermal characterization of the microhotplates shows that significant reduction in power consumption was achieved using suspended structure.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.81-85
• /
• 1997

Ceramide has been suggested as an important mediator of the effects of extracellular agonists on cell growth inhibition, differentiation, apoptosis. However the biochemical sign aling mechanism involved in transducing the effects of ceramide on leukemia cell differentiation is still unclear. In these respects, we examined the regulatory effects of ceramide on c-jun gene expression during differentiation. In U-937 cells. ceramide increased c-jun mRNA levels in a time-dependent manner. The half life, of c-jun mRNA was 30 min. In contrast, inhibition of protein synthesis with cycloheximide in the absence, of transcription with actinomycin D increased the half-life of c-jun mRNA in ceramide-treated U-937 cells to more than 90 min. In order to examine whether ceramide-inhibited c-jun gene expression is regulated through ceramide-activated protein phosphatase (CAPP), a direct target for the action of ceramide, okadaic acid were treated to the cells. Okadaic acid inhibited enhancement of c-jun mRNA induced by C2-ceramide in a dose-dependent manner. These results suggested that ceramide increases c-jun mRNA level during differentiation in U-937 cells and regulates the gene expression on posttranscriptional level. In addition, we provide the evidence that CAPP is involved in ceramide-induced c-jun gene expression in U-937 cells.

• Korean Journal of Mathematics
• /
• v.27 no.2
• /
• pp.437-444
• /
• 2019

For c > -1, let ${\nu}_c$ denote a weighted radial measure on ${\mathbb{C}}$ normalized so that ${\nu}_c(D)=1$. For $c_1,c_2>-1$ and $f{\in}L^1(D^2,\;{\nu}_{c_1}{\times}{\nu}_{c_2})$, we define the weighted Berezin transform $B_{c_1,c_2}f$ on $D^2$ by $$(B_{c_1,c_2})f(z,w)={\displaystyle{\smashmargin2{\int\nolimits_D}{\int\nolimits_D}}}f({\varphi}_z(x),\;{\varphi}_w(y))\;d{\nu}_{c_1}(x)d{\upsilon}_{c_2}(y)$$. This paper is about the space $M^p_{c_1,c_2}$ of function $f{\in}L^p(D^2,\;{\nu}_{c_1}{\times}{\nu}_{c_2})$ ) satisfying $B_{c_1,c_2}f=f$ for $1{\leq}p<{\infty}$. We find the identity operator on $M^p_{c_1,c_2}$ by using invariant Laplacians and we characterize some special type of functions in $M^p_{c_1,c_2}$.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.845-851
• /
• 2002

The synthesis of the intramolecular donor - stabilized silyl and germyl complexes of the type ($Cab^c.p) MMe_2X$ (2a:M=Si, X=Cl;2b;M= Ge, X=Cl;2e;M=Si,X=H) was achieved by the reaction of $LiCab^c,p$ (1) with $Me_2SiClX$ and $Me_2GeCl_2$ respectively. The intramolecular M←P interacion in 2a-2c is provided by $^1H$, $13^C.$, $31^P$ and $29^Si$ NMR spectroscopy. The salt elimination reactions of dichlorotetramethyldisilane and -digermane with 1 afforded the $bis(\sigma-carboranylphosphino)disilane$ and disgermane [$(Cab^C.P)MMe_2]_2(4a;M$ = Si;4b: M=Ge). The oxidative addition reaction of 4a-4b with $pd_2(dba)_3CHCl_3afforded$ the bis(silyl)-and bis(germyl)-palladium complexes. The chloro-bridged dipalladium complexes were obtained by the reaction of 2a-2b with $pd_2(dba)_3CHCl_3$ The crystal structures of 5a and 7b were determined by X-ray structural studies.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.260-263
• /
• 2017

Based on several CPU cores, an SoC including ADCs, DC-DC converter and 2M-byte SRAM is proposed in this paper. The CPU core consists of a 12-bit MENSA, a 32-bit Symmetric multi-core processor, as well as 16-bit CDSP. To eliminate the external SDRAM memory, internal 2M-byte SRAM is implemented. Because the SRAM normally occupies huge area, the parasitic components reduce the speed of SoC. In this work, the SRAM blocks are divided into small pieces to reduce the parasitic components. The proposed SoC is developed in a standard 55nm CMOS process and the speed of SoC is 200MHz.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1729-1732
• /
• 2009

Bioactivity-guided fractionation led to the isolation of two new phenylpropanoids, 3-O-p-coumaroyl-1-(4-hydroxy- 3,5-dimethoxyphenyl)-1-propanone (1) and 3-O-p-coumaroyl-1-(4-hydroxy-3,5-dimethoxyphenyl)-1-O-$\beta$-gulcopyranosylpropanol (2), together with three known compounds, N-p-coumaroylserotonin (3), N-feruloylserotonin (4) and p-coumaric acid (5) from the leaves of Sasa quelpaertensis Nakai. Their structures were elucidated by spectroscopic methods including 1D and 2D-NMR. Compared to arbutin (I$C_{50}$ 0.048 mM) as a control, compounds 3 and 4 exhibited stronger tyrosinase inhibition activities with an I$C_{50}$ values of 0.027 mM and 0.026 mM, respectively. Compounds 1 (I$C_{50}$ 0.055 mM) and 2 (I$C_{50}$ 0.053 mM) also showed strong activities.

• Korean Journal of Microbiology
• /
• v.23 no.3
• /
• pp.177-183
• /
• 1985

Some properties of an extracellular cytosine deaminase produced from Arthrobacter sp.JH-13 were examined after 20-80% of ammonium sulfate fractionation. Among some substrates, this enzyme utilized cytosine and 5-fluorocytosine as a substrate. The optimum pH and temperature for the activity of this enzyme were found to be near 8.0 and $40^{\circ}C$, respectively. The ensyme was more stable in 0.2M of Tris-HCl buffer than 0.2M of potassium phosphate buffer. The enzyme was generally stable below $50^{\circ}C$, but inactivated completely at $70^{\circ}C$. 1mM of $Fe^{3+},\;K^+\;and\;Na^+$ increased the enzyme activity, but 0.01mM of $Co^{2+},\;Cu^{2+},\;Ni^{2+},\;Hg^{2+},\;Ag^{2+},\;Zn^{2+},\;Ba^{2+},\;and\;Mg^{2+}$ markedly inactivated the enzyme activity. 0.1mM of p-chloromercuribenzoate, trichloroacetic acid, and N-ethylmaleimide compleyely inhibited the enzyme activity, but 0.1mM of 2-mercaptoethanol slightly increased the enzyme activity.

• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.265-272
• /
• 1998

For the purpose of investigating the effect of sintering atmosphere and carbon addition on sintered density and microstructural characteristics, the M3/2 grade high speed steel powders with the addition of carbon are sintered in vacuum and $20%H_2/79%N_2/l%CH_4$ gas atmosphere. With the addition of 0 wt%C, 0.45wt%C and 1.15 wt%C the optimum sintering temperatures decrease down to $1260^{\circ}C$, $1210^{\circ}C$ and $1150^{\circ}C$ respectively for the vacuum sintered specimen, and also decrease down to $1130^{\circ}C$, $1120^{\circ}C$ and $1115^{\circ}C$ for the gas sintered specimen. The threshold temperatures for full densification decrease steeply with increasing carbon content of the sintered specimen, while this temperatures are slowly decreased at high carbon content. The vacuum sintered specimen shows the primary carbides of MC and $M_6C$ type at the optimum sintering temperature, and eutectic carbides of $M_2C$ and Fe-Cr type are produced in the oversintered specimen. The gas sintered specimen exhibits M6C and Fe-Cr type primary carbides at the optimum sintering temperature. The eutectic carbides of $M_6C$ and Fe-Cr type and MX type carbonitride are shown for the oversintered specimen in the gas atmosphere. The hardness of gas sintered specimen shows high value of 830-860 Hv due to the increment of carbide precipitation.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.119-124
• /
• 2009

The aim of this study was to investigate the influence of ionic strength and iron impregnation on the attachment of Enterococcus faecalis to granular activated carbon (GAC). Column experiments were performed to examine bacterial adhesion to coconutbased GAC (c-GAC), iron-impregnated c-GAC (fc-GAC), acid-washed c-GAC (a-GAC) and iron-impregnated a-GAC (fa-GAC) under two different solution (NaCl 1, 10 mM) conditions. Results showed that bacterial mass recovery in c-GAC decreased from 77.3 to 61.6% while in a-GAC it decreased from 71.6 to 32.3% with increasing ionic strength from 1 to 10 mM. This indicates that bacterial attachment to GAC can be enhanced with increasing ionic strength. Results also showed that the mass recoveries in fc-GAC were 62.6% (1 mM) and 53.3% (10 mM) while they were 50.8% (1 mM) and 16.9%(10 mM) in fa-GAC, which were lower than those in c-GAC and a-GAC. This demonstrates that bacterial adhesion to GAC can be enhanced through iron impregnation. This study provides information regarding the effects of ionic strength and iron impregnation on bacterial attachment to GAC. Furthermore, this study will advance our knowledge of bacterial removal in surface-modified granular media.