• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.648-650
• /
• 2007

We demonstrate highly efficient White Polymer Electrophosphorescent Light-emitting Diode using newly developed green and red light emitting heteroleptic iridium complex, Ir-(pq)2tpy, and blue light emitting fluorescent dopant, BczVBi. The best luminous efficiency reached 28cd/A with maximum luminance of 87000cd/m2. The scheme for determining optimum device architecture and dopant concentrations were constructed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.589-592
• /
• 2007

In this paper, we propose IBS(ITO-BUS Separated) electrode structure. BUS electrode lines are placed apart from the ITO electrode lines, and they are electrically connected with vertical auxiliary electrodes. We varied the lengths of the vertical electrodes as 70, 120, 320um. The highest luminous efficiency and the largest IR emission peak were obtained for 70um length.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.197-197
• /
• 2000

AC-PDP의 구동 요소 중 중요한 것은 벽전하와 그로부터 유도되는 벽전압, 그리고 프라이밍입자(priming partical)의 밀도 변화라고 할 수 있다. 패널의 초기화가 전구간의 방전을 좌우하기 때문에 초기화 펄스의 기울기에 따른 방전현상을 이해하고자 각 구간에서의 전기-광학적 특성과 함께 휘도와 효율의 관점에서 연구 조사하였다. 본 실험에서 사용한 reset 펄스파형은 셀의 방전개시전압과 인가전압사이의 차이가 적고, 초기 프라이밍 입자와 단위시간당 전자에 공급되는 에너지가 적은 램프형태의 초기화 펄스를 사용하였다. 실험장치는 VDS(versatile driving simulator)시스템을 이용하였다. 실험결과 reset의 기울기가 커질수록 반응시간이 빨라지며, 약방전의 형태를 고속이미지로 확인하였다.

• Journal of Advanced Technology Convergence
• /
• v.2 no.4
• /
• pp.13-19
• /
• 2023

Following the signing of the Paris Agreement on Climate Change (UNFCCC, 2015), the world is expanding greenhouse gas reduction activities through comprehensive participation that includes not only developed countries but also developing countries. Major countries around the world are placing high expectations on the effectiveness of total carbon emissions regulation through the carbon emissions market. However, in order to obtain carbon credits, third-party verification is required based on quantitative carbon reduction data. Accordingly, in this paper, we developed an AIoT high-efficiency street light for carbon emissions and conducted a performance analysis study to measure the luminous efficiency of the lighting fixture. To obtain carbon emissions rights, we used high-efficiency LED PKG, developed our own high-voltage PFC, and developed high-efficiency lighting fixtures capable of communication. For communication, the 2.4GHz LoRa method was adopted between the lighting fixture and the gateway. Lens design was conducted through simulation of Korea Expressway Corporation's standard streetlight types A, B, and C. The performance of the streetlight was verified as being more efficient than other existing products through the measurement of luminous efficiency by an accredited rating agency, and it is expected that carbon emissions rights will be obtained by reducing electrical energy through this.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.69.2-69.2
• /
• 2012

Graphene films have a strong potential to replace indium tin oxide anodes in organic light-emitting diodes (OLEDs), to date. However, the luminous efficiency of OLEDs with graphene anodes has been limited by a lack of efficient methods to improve the low work function and reduce the sheet resistance of graphene films to the levels required for electrodes. Here, we fabricate flexible OLEDs by modifying the graphene anode to have a high work function and low sheet resistance, and thus achieve extremely high luminous power efficiencies (37.2 lm/W in fluorescent OLEDs, 102.7 lm/W in phosphorescent OLEDs), which are significantly higher than those of optimized devices with an indium tin oxide anode (24.1 lm/W in fluorescent OLEDs, 85.6 lm/W in phosphorescent OLEDs). We also fabricate flexible white OLED lighting devices using the graphene anode. These results demonstrate the great potential of graphene anodes for use in a wide variety of high-performance flexible organic optoelectronics.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.2
• /
• pp.85-88
• /
• 2010

Deep blue organic light emitting diodes (OLEDs) were fabricated using 5 wt.% doped BCzVBi with various blue host materials such as NPB, DPVBi, MADN and TPBi. A blue OLED device, using DPVBi as host material, was constructed via NPB ($500\;{\AA}$) / DPVBi:BCzVBi ($200\;{\AA}$) / Bphen ($300\;{\AA}$) / LiF ($20\;{\AA}$) / Al ($1,000\;{\AA}$) and it shows a maximum luminescence of $4,838\;cd/m^2$, a current density of $32.7\;mA/cm^2$, a luminous efficiency of 3.3 cd/A and CIExy coordinates of (0.19, 0.15) at 4.5 V whereas the luminous efficiencies and CIExy coordinates of other blue OLEDs using NPB, MADN and TPBi as host materials have 1.1, 2.6 and 2.0 cd/A and (0.15, 0.11), (0.15, 0.10) and (0.15, 0.10), respectively. Energy transfer mechanisms between BCzVBi and its host materials were discussed with an energy band structure of host materials.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.7
• /
• pp.616-621
• /
• 2003

The white-light-emitting organic LED with two-wavelength was fabricated using blue emitting material(DPVBi) and a series of orange color fluorescent dye(Rubrene) by vacuum evaporation processes. The basic structure of white-light-emitting OLED was ITO/NPB(150$\AA$)/DPVBi(150$\AA$)/Alq$_3$:Rubrene(150$\AA$)/BCP(100$\AA$)/Alq$_3$(150$\AA$)/Al(600$\AA$). The changes of the CIE coordiante strongly depended on the doping concentration of Rubrene and the thickness of NPB layer. We obtained the white-light-emitting OLED close to the pure white color light and the CIE coordinate of the device was (0.315, 0.330) at applied voltage of 13V when the doping concentration of Rubrene was 0.5wt% and the thickness of NPB layer is 200$\AA$. At a current of 100mA/$\textrm{cm}^2$, the quantum efficiency was 0.35%.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2169-2171
• /
• 2005

A new structure is proposed to achieve a low sustaining voltage and high luminous efficacy. By measuring minimum sustaining voltage(Vs) discharge current(Ion), discharge(Ioff), and brightness of the light from a 4-inch ac-PDP, performances of the conventional structure and proposed structure are compared. When compared with the conventional structure, proposed structure showed 6.5% Vsm improvement, 22% luminance improvement and 20% light dispersion improvement at the Ne-Xe(8%) gas mixture of 400 torr.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.524-528
• /
• 2019

Although different types of discharge cells exist, in common it is the primary goal for all discharge cells to have lower drive voltages and higher efficiency characteristics. To improve these factors, many studies are conducted that prolong the discharge path inside the discharge cell or change the composition of the working gas. In this paper, the two-dimensional fluid simulation was used to calculate the discharge voltage (firing voltage and sustain voltage) and the change in luminance and luminous efficacy according to the change in gap distance between discharge electrodes. In addition, we looked at changes in various charged particles, exciting particles and VUV particles, and studied the causes of the resulting values.

• Fashion & Textile Research Journal
• /
• v.26 no.2
• /
• pp.218-226
• /
• 2024

In recent times, many accidents have occurred due to challenges in accurately identifying the location of workers, posing a significant societal concern demanding resolution. Therefore, it is essential to develop smart luminescent safety attire to enhance worker visibility in dim environments, thereby curbing accidents. In this study, we propose the utilization of textile-based OLED devices in creating smart luminescent safety clothing, aiming to augment the discernibility of workers over extended distances in low-luminance environments. In view of this, we engineered an attachable textile-based OLED module that balances high luminous efficiency with wearer comfort. Subsequently, a prototype smart luminescent safety clothing was demonstrated, and a performance evaluation was conducted to determine whether any discomfort occurred on wearing it. The fabricated OLED luminous module exhibited high luminance, thus validating the feasibility of creating smart luminescent attire with adequate brightness. Furthermore, there was no significant wearing stress observed, even after wearing it for more than 8 hours, and there was no impediment to various work-related movements. Through this research, we successfully demonstrated OLED based on smart luminescent safety clothing, which has the potential for wide-ranging applications across various industries and occupations, and is expected to play a crucial role in averting safety incidents.