• 박물관보존과학
• /
• 제19권
• /
• pp.83-98
• /
• 2018

본 조사 연구에서는 박물관 사용 조명에 대한 조사 방법이 주로 조도에 국한된 것에서 나아가 조도, 휘도, 연색성 등 좀 더 다양한 항목의 조사를 통해 조명에 대하여 객관적으로 평가하고자 하였다. 특히 이번 조사에서는 박물관 조명이 가지고 있는 문제점을 시각적으로 측정하여 도출하였고, 박물관의 조도 기준에 적합하면서도 쾌적하게 관람할 수 있는 조명에 대하여 제시하고자 하였다. 물론 앞으로도 박물관의 조명은 문화재의 보존이 우선시 되어야 하지만 효과적인 관람을 위해 휘도와 색온도, 연색성 등을 같이 고려하여 조명하는 것이 안전하면서도 효과적인 전시가 될 것이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.269-272
• /
• 2008

LGP is a key component of LCD back light unit because it determines the brightness and sharpness of display image. Usually, it has optical patterns fabricated on the bottom surface. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme helped find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• 조명전기설비학회논문지
• /
• 제25권4호
• /
• pp.7-15
• /
• 2011

Based on the master plan, this study classified Wonju-si into five major regions and 19 areas by analyzing its night characteristics and deduced problems by analyzing quantitative light distribution of major points at the regions and areas through the measurement of illuminance and luminance and by surveying people's awareness. To develop eco-friendly night environment image of Wonju, Woju's identify was to be created by the planning for the 19 area and improvements for each type. Additionally, detailed items for maintenance were suggested by classifying them into illuminance, color temperature, luminance, lighting display, lighting time, light distribution type, and so forth.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.111-116
• /
• 2005

This study examined the luminance and light appearance about 14 flood lighting established bridges of 26 Han River bridges and then analyzed the result through questionnaire and so on. Through this result, we looked out for new direction of analysis research for flood lighting that consider the problem of optimum brightness and light appearance harmony at flood lighting presentation, proposed to be utilized concretely in lighting design guideline for Han River bridge.

• KIEAE Journal
• /
• 제5권4호
• /
• pp.51-57
• /
• 2005

For the evaluating daylighting performance, field measurement, scale model test and a set of computer tools can be applied. For the scale model measurements, the sky simulator is a vital facility to represent the desired sky conditions consistently. Recently K university has developed a large size sky simulator, 6m-diameter and 3.7m-height, that is suitable for the international standard. To verify the reliability of the sky simulator, the luminance distribution on the inner sky surface was measured and compared with the CIE standard overcast sky model. It is found that the sky simulator can be reproduced the CIE standard overcast sky condition with 4.3% as mean difference. K university sky simulator is fully validated for usability and accuracy for daylighting researches.

• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.355-359
• /
• 2003

1. The objective of this paper is to investigate the indoor environment from the viewpoint of interaction between physical environment and the human responses. 2. A continuous measurement has been carried out for 1 year and distribution of variables have been measured for 1 day. 3. The attitude of workers was investigated by a questionnaire. 4. As the result, average luminance represented more than 800-1800 lx in the office, in contrast with less than 1000 lx in the encourage luminance of an office. 5. There was a significant difference of the occupants' response to the light environment between the neighboring environments. 6. Measured thermal conditions are on the edge of the ASHRAE comfort envelope in summer, and in the neighborhood of the lower dry limit of the envelope in spring.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.299-301
• /
• 2004

Inductively coupled plasma is commonly used for electrodeless lamp due to its ease of plasma generation. Optical characteristics significantly depend on the RF power and gas pressure of the plasma. This paper describes the measurement of luminous efficacy as a function of RF power and gas pressure with a goal of finding optimal operating conditions of the electrodeless lamp. The gas pressure was varied from 10 [mTorr] to 100 [mTorr] and the RF power was varied from 10 [W] to 120 [W]. It was found that the luminous flux tends to be decreased when argon pressure is increased, and the luminous flux is increased as RF fewer is increased. It was also found that the luminance efficacy is high when the argon pressure is low and when the RF power is low.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.73-80
• /
• 2010

The purpose of this study was to investigate the actual conditions of radiation safety supervision in animal clinics using inspection standard of X-ray generator for diagnosis. The surveys for inspection standard system, equipment condition, and safety supervision were carried out in 18 animal clinics randomly. The inspection standard included reproducibility of dose exposure, kVp, mAs, collimator accuracy test, collimator luminance test, X-ray view box luminance test, grounding system equipment test and external leakage current test. The surveys of equipment condition and safety supervision used one-on-one interview with 5 points measurement. As a result, 44.44% of reproducibility of dose exposure was proper, 81.25% of kVp test was good, and 100% of mAs test was appropriate. Also, 66.66% of collimator accuracy test was proper, 61.11% of collimator luminance test was good, 53.13% of X-ray view box luminance test was suitable. In addition, only 5.55% of grounding system equipment and ground resistance was proper, 63.64% of external leakage current test was appropriate in grounding system equipment test. The 100mA electric capacity of X-ray generator for diagnosis was popular with 44.44%, and its 55.56% was purchased used equipment. Monthly average of less than 50 times (61.11%) was top frequency in use, and no animal clinic had a thermo-luminescence dosimeter(TLD). The 16 animal clinics with radiation safety zone and 2 without radiation safety zone were appeared.

• 조명전기설비학회논문지
• /
• 제20권6호
• /
• pp.18-25
• /
• 2006

야간도시경관의 미적향상, 시각적 안전의 확보 및 빛 공해 방지 등을 고려한 기존의 경관조명 평가방법은 대부분 측정점을 한 지점으로 한정하여 조명물리량을 분석함으로써 거리에 따른 평가결과의 다양성이 소홀히 취급되었다. 본 연구는 측정거리의 변화에 따른 평가대상 구조물의 표면휘도를 고려한 경관조명 평가방법을 제시하는데 연구의 목적이 있다. 이를 위하여 경관조명이 설치된 한강의 교량을 대상으로 CS-100과 ProMetric 1400 등 디지털 측광기기와 경관조명 소프트웨어 Lightscape v3.2를 활용하였다. 즉 측정거리 100[m], 300[m], 500[m]로 구분하여 현장측정 및 컴퓨터 시뮬레이션을 실시한 결과 거리변화에 따른 휘도의 평가방법은 대상 구조물로부터 약 100[m] 이내에서 실시하는 것이 휘도측면에서 유리한 것으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.723-728
• /
• 2006

In this paper, we present a new system, OPTISCOPE SA, especially designed for precise measurement of temporal behavior of LCD displays. We show that gray to gray level response time measurement requires a very sensitive and precise instrument and also that the capacity to measure luminance levels and gamma curve can be useful. Quite often, precise evaluation of LCD response time needs also use of low pass and stop band filters to suppress noise and flicker. Low pass filters affect the results but can be corrected for simple temporal behaviors. For complex temporal behaviors like those observed for overdriven LCDs, we show that direct adjustment of theoretical responses is much more efficient to get a complete picture of the temporal behavior of such displays.