• 제목/요약/키워드: Lumber support

검색결과 11건 처리시간 0.018초

승객의 안락감에 미치는 럼버 서포트의 변형에 관한 연구 (A Study on the Displacement of Lumber Support Affecting the Comfortableness of Passenger)

  • 조재웅;민병상;김기선;최두석;조찬기
    • 한국산학기술학회논문지
    • /
    • 제11권9호
    • /
    • pp.3168-3175
    • /
    • 2010
  • 럼버 서포트는 허리에 가해지는 압력을 지지하여 장시간 운전시 피로감을 해소하는 자동차 시트의 부품이다. 본 연구에서는 자동차 시트의 럼버 서포트를 모델링 하였으며, 해석은 럼버 서포트의 베드부분에 여러 가지의 비드를 보강하여 사람이 자동차 시트에 앉아 있을 때 작용하는 하중에 따른 변형에 대해 구조해석을 하여 안락성면에서 적합한 모델을 찾는 것이 주된 목적이다. 5줄 보강타입과 풀타입이 5mm안쪽의 변형과 500 N의 접촉력이 나타나 승객의 안락감에 있어 가장 적합하고 내구성도 양호한 것으로 사료된다.

자동차 요추지지대의 설계 변수에 따른 불편도 및 요추 변형과의 상관 관계 분석 (Study on Lumbar Spine Curvature and Lower Back Discomfort with Design Parameter of Automotive Seat Lumbar Support)

  • 양정태;이정호;최형연
    • 대한산업공학회지
    • /
    • 제39권3호
    • /
    • pp.192-197
    • /
    • 2013
  • In this study, it is investigated the relationship between sitting discomfort and major design variables of lumber support, such as prominence, height and width through volunteer tests. Korean $50^{th}$ percentile males and American $50^{th}$ percentile males are recruited among 36 to 45 years old peoples who have driving experiences and have no back pain during the past 12 months. Subject ratings are asked by changing design variables randomly. Body pressure and lumber position changes are also measured as object measures. And correlation among subject ratings, object measures and three design variables are analyzed using statistical analysis. As a result, it is revealed that prominence is the most dominant factor that correlates to the discomfort strongly for both-Koreans and Americans and contribution of other two variables are very low.

End Distance of Single-shear Screw Connection in Cross Laminated Timber

  • Oh, Jung-Kwon;Kim, Gwang-Chul;Kim, Kwang-Mo;Lee, Jun-Jae;Hong, Jung-Pyo
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권6호
    • /
    • pp.746-752
    • /
    • 2017
  • Cross-laminated timber (CLT) is a relatively new engineered wood for timber construction. It is a great shear wall material. It was known that the shear performance of the CLT wall depends on the performance of connections. In connection, nail or screw has to be installed with a certain distance from the end of the timber. Current building code specifies the distance on the name of end distance. The end distance was decided as a minimum distance not to make splitting or tearing out in lumber or glued laminated timber. As a relatively new engineered wood, the end distance of CLT connection need to be identified because CLT is cross-wisely glued lumber products like plywood. Different from glued laminated timber or lumber, cross layer of CLT may prevent wood from splitting or tearing-out. As a result, the end distance of CLT was expected to be reduced than glued laminated timber. The shorter end distance may let more versatile connector design possible. In this study, prior to developing novel connection for CLT, the end distance of CLT connection was experimentally investigated to identify the end distance limitation. The experiments showed that the end distance can be reduced from 7D to 6D, in case of the tested CLT combination and screw in this study.

동적 체압 분포를 이용한 운전 자세 변화와 요추지지대의 정량적 평가 (Quantitative Evaluation of Driver's Postural Change and Lumbar Support Using Dynamic Body Pressure Distribution)

  • 나석희;임성현;정민근
    • 대한인간공학회지
    • /
    • 제22권3호
    • /
    • pp.57-73
    • /
    • 2003
  • Although body pressure distribution is sensitive to movements and is relatively simple to measure even in small space, there are few researches involving applications to driver's posture and its change. The main objective in this study is the application of body pressure distribution measurements for the prediction of the driver's posture and its change. This requires quantitative analyses of the dynamic body pressure distribution, which is the change of body pressure distribution with time. The experiment involved 16 male subjects who drove for 45 minutes in a seating buck. Measurement time, stature group, and lumbar support prominence were selected as independent variables, with subjective ratings of driver's discomfort, body posture data of hip, torso. knee angle, and body pressure data variables as dependent variables. The body pressure change variables and subjective ratings were found to increase as the measurement time increased and body pressure ratio variables reflected the torso angle. From the results and analysis of the body posture data and subjective rating results, it was predicted that the seats and the design of the lumbar supports used in the experiment was not fit for tall subjects, which could also be confirmed through the body pressure distribution data.

승객의 안락감에 미치는 럼버 서포트의 변형에 관한 해석 (Analysis on Displacement of Lumber Support Affecting Comfortableness of Passenger)

  • 조재웅;민병상;김기선;최두석;조찬기
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2010년도 춘계학술발표논문집 2부
    • /
    • pp.618-621
    • /
    • 2010
  • 럼버 서포트는 허리에 가해지는 압력을 지지하여 장시간 운전시 피로감을 해소하는 자동차 시트의 부품이다. 본 연구에서는 자동차 시트의 럼버 서포트를 모델링 하였으며, 해석은 럼버 서포트의 베드부분에 여러가지의 비드를 보강하여 사람이 자동차 시트에 앉아 있을 때 작용하는 하중에 따른 변형에 대해 구조해석을 하여 안락성면에서 적합한 모델을 찾는 것이 주된 목적이다. 5줄 보강타입과 풀타입이 5mm안쪽의 변형과 500 N의 접촉력이 나타나 승객의 안락감에 있어 가장 적합하고 내구성도 양호한 것으로 사료된다.

  • PDF

노동부고시와 KS 규격에 의거한 사무용 의자와 책상의 인간공학적 분석 (Ergonomic analysis of office chairs and desks against Ministry of Labor Notification and Korean Standards)

  • 이윤근;박희석;김대성
    • 한국산업보건학회지
    • /
    • 제19권1호
    • /
    • pp.16-24
    • /
    • 2009
  • This research aims to measure and analyze the dimensions of typical office chairs and desks sold in domestic market, and to suggest the modifications of national guidelines considering Korean peoples' body characteristics. The scope of this study was limited to the desktop type of computer jobs, excluding laptop environment. The dimensions of 24 different office chairs and 7 tables were measured, and their dimensions were analyzed against the Ministry of Labor (MOL) Notification and Korean Standards (KS). At the same time, the data from the Size Korea was also considered. As a result, the KS guidelines were overall fulfilled by the measured products, while the MOL Notification was not. It was found that the guidelines on the chair height, seat pan depth, lumber support height, and armrest height need to be modified. Some inconsistencies between the MOL Notification and KS were also found. It is suggested that the required dimensions specified by both guidelines should be unified.

자동차 시트용 플라스틱 서스펜션 시스템 개발 (Development of Plastic Suspension System for Automotive Seat)

  • 조재웅;김기선;최두석;김세환;방승옥;조찬기
    • 한국산학기술학회논문지
    • /
    • 제12권3호
    • /
    • pp.1091-1097
    • /
    • 2011
  • 본 논문은 자동차용 시트의 내부에 설치되어 탑승자의 등 부위를 지지하여 편안한 승차감을 제공하는 자동차용 시트의 플라스틱 서스펜션 어셈블리 개발에 관한 것이다. 운전자의 허리를 균등하게 지지하여 주는 구조를 갖도록 설계하고 시트 백 프레임과 플라스틱 서스펜션이 원활하게 조합될 수 있는 구조로 개발하고자 한다. 체압 분포 특성을 고려하여 서스펜션의 단품을 설계하고 기능성을 평가하였다. 또한 실제와 동일한 사이즈의 서스펜션을 모델링하고 구조해석을 수행하였다. 기존 스프링 서스펜션과 새로 개발된 플라스틱 서스펜션의 해석결과 및 실제 측정값이 유사함을 확인하고 최적의 해석 및 설계를 확립하였다.

경막외강(硬膜外腔)에 주입(注入)한 생리식염수(生理食鹽水)가 뇌척수액압(腦脊髓液壓)에 미치는 영향(影響) (Cerebrospinal Fluid Pressure Changes Following the Injection of Saline into the Epidural Space)

  • 전재규;이석강;주영은
    • The Korean Journal of Physiology
    • /
    • 제11권1호
    • /
    • pp.21-26
    • /
    • 1977
  • Many cases have been reported that a post spinal headache can be relieved immediately by an epidural injection of saline; and autologous blood also has recently been used successfully instead of saline. The changes of the cerebrospinal fluid pressure in 40 cases were observed in the present study in support of the concept; that a continuous leakage in association with hypovolemia and hypotension of the cerebrospinal fluid is the primary cause of a post spinal headache. Subarachnoid pressure increased immediately with saline injection into the lumber epidural space. A spinal needle was inserted into the subarachnoid space at the level of $L2{\sim}3$ and opening pressure of the cerebrospinal fluid was read. An epidural Tuohy needle was insertad at the$L3{\sim}4$ and 25m1 of saline was injected into the epidural space and the cerebrospinal fluid pressure was read in the sitting position. $\underline{Sitting\;Position:}$ Mean pressure after injection $555{\pm}(110.9)mm\;H_2O$, Pressure rise rise (%) 51.3%, Mean opening pressure $366{\pm}(52.2)mm\;H_{2}O$, $\underline{Lateral\;position:}$ Mean pressure after injection $308{\pm}(70.8)mm\;H_{2}O$, Pressure(%) 86.7%, Mean opening pressure $165{\pm}(42.6)mm\;H_{2}O$. These pressure changes responded almost simultaneously as saline was injected. This pressure rise of 51.3% in the sitting position and 86.7% in the lateral position are clinically very significant. Therefore, it is most possible that the immediate relieve of post, spinal headache by injection of fluid into the epidural space is simultaneous with the increase of the cerebrospinal fluid pressure.

  • PDF

전산화단층촬영에서 촬영 목적 부위와 주변 결정장기에 대한 피폭선량 평가: 선량 권고량 중심으로 (Evaluation of Radiation Exposure Dose for Examination Purposes other than the Critical Organ from Computed Tomography: A base on the Dose Reference Level (DRL))

  • 이서영;김경리;하혜경;임인철;이재승;박형후;곽병준;유윤식
    • 한국방사선학회논문지
    • /
    • 제7권2호
    • /
    • pp.121-129
    • /
    • 2013
  • 최근 다중검출기 CT의 보편화 된 사용으로 환자의 피폭선량이 증가하고 있다. 따라서 광자극발광선량계를 이용해 촬영 목적 부위와 주변 결정장기에 대한 환자의 피폭선량을 측정하고 그에 따른 생물학적 효과를 예측하여 저감화 방안을 제시하고자 하였다. ICRP에서 권고한 표준안을 대상으로 만들어진 인체 모형 표준 팬텀에 교정상수를 부여받은 OSD 선량계를 측정하고자 하는 좌 우 수정체, 갑상선, 촬영의 중심점, 생식선에 부착하여 각 검사 부위별 노출 조건과 동일한 상태에서 환자의 피폭 선량을 모사하였다. OSL 선량계의 평균 교정상수는 $1.0058{\pm}0.0074$이었으며 검사 부위별 주변 결정장기의 등가선량은 좌 우측 수정체의 경우 직접 피폭이 약 50mGy로 최대였으며 간접 피폭되는 경우 0.24mGy, 원거리에서는 0.005mGy미만의 기준 준위 이하로 측정되었다. 갑상선의 경우 두부 검사에서 10.89mGy로 최대였으며 흉부에서 7.75mGy, 복부 및 요추부, 골반부에서는 기준 미만이었다. 생식선의 경우 골반검사에서 21.98mGy로 최대였으며 간접 피폭되는 검사에서 기준 준위 미만에서 6.92mGy까지 피폭되었다. CT 검사에서 DRL에 대한 저감화 방법은 국제기구에서 권고하고 있는 방사선 방어 원칙에 대한 정당한 해석과 제도적 뒷받침이 필요하다. 따라서 환자의 피폭을 최소화하기 위해서는 정당성을 충족하여야 하며 환자의 피폭선량에 미치는 영향들을 체계화하고 조직의 불필요한 피폭을 최소화 하여야 한다.

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF