• 제목/요약/키워드: Lower System

검색결과 11,098건 처리시간 0.042초

여중생의 하반신 체형분류에 따른 하의류 치수체계 (Sizing System for the Junior-high School Girls′ Lower Clothes According to the Lower Body type Analysis)

  • 임지영
    • 대한가정학회지
    • /
    • 제40권7호
    • /
    • pp.119-127
    • /
    • 2002
  • Fitness of clothes becomes a major concern in apparel industry. In order to improve clothing fitness, it's very important to suggest a systematical sizing system. The Purpose of this study was to suggest a standard sizing system for junior-high school girls'lower clothes. The subjects were 402 middle-high school girls of 13 to 15 year-old. 4 clusters were categorized by cluster analysis and the sizing system was classified according to four lower body types. The size intervals of waist girth and hip girth were 3cm and 4cm respectively. The most frequent size were 64-86 in the short and small figure type 1,67-90 in the fattest figure type 2, 61-86 in the average size type 3 and 64-90 in type 4 taller than others types. The sizing system, which had frequencies more than 4%, was classified 9 cases, 11 cases, 8 cases and 9 cases respectively by lower body types. This result will contribute to clothing fitness of consumer and the amount of production.

저온공조용 취출구의 선정 (Selection of Diffuser for Lower Temperature Air Distribution System)

  • 박성규;유호준;최명신
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.484-492
    • /
    • 2008
  • Air Discharge pattern and even temperature distribution is critical for a successful lower temperature air distribution system, which would supply lower temperature air than normal HAVC system. Selection of appropriate diffuser is the most critical element in completing lower temperature system.

  • PDF

하부요로계 폐색 진단용 요류음 계측 시스템의 구현 및 평가 (Implementation and estimation of the urophonography measurement system for diagnosis of Lower urinary tract symptom)

  • 정도운;조성택;전계록
    • 센서학회지
    • /
    • 제14권1호
    • /
    • pp.7-15
    • /
    • 2005
  • A sensor and measuring system were implemented to measure both uroflow and urophonography signal during urination for diagnose the lower urinary tract symptom. The implemented system was composed of the uroflow sensor using the load-cell, the urophonography measurement sensor so as stethoscope type, pre-processing part for sensors signal detection, amplifier and filter, system control parts and PC measurement program. A simulator of the lower urinary system that is experimental equipment implemented for evaluate the developed system. The two signals were measured using implemented system and analyzed these signal by means of time domain and frequency domain for extraction of the characteristic parameter which can most effectively reflected by the occlusion of the lower urinary system. Furthermore two signals were measured and analyzed with the subject of 5 healthy adult for clinical application possibility of the implemented system. As a result, the most influence bandwidth of effect according to occlusion of the lower urinary system is $253{\sim}282$ Hz of the urophonography signal.

배뇨력 측정을 통한 하부요로계의 보상성기능항진 평가 (Estimation of compensatory hypertrophy in lower urinary system using void force measurement)

  • 정도운;전계록
    • 센서학회지
    • /
    • 제15권6호
    • /
    • pp.449-456
    • /
    • 2006
  • The purpose of urodynamic investigation is to obtain the information on the function of the urinary system. The aim of this study is to acquire the useful information of lower urinary tract symptom (LUTS) diagnosis through void force signal as noninvasive method. The system which could evaluate the function of compensatory hypertrophy with noninvasive and comfortable method was implemented to measure uroflow and void force during urination. The implemented system composes of the sensor parts, signal conditioning parts and PC monitoring program. For the evaluation of the implemented system, the simulation of control part of the system was performed and the model system for the lower urinary system was designed. The superiority of a measuring characteristic of the implemented system was verified using the model system. From the evaluation of the model system, we have found out that the void force was dependent on the occlusion degree and compensatory hypertrophy significantly.

스캐닝 시스템과 하악용 가변형 트레이의 재현성 (Scanning System and Reproduction of Adjustable Lower Dental Impression Tray)

  • 차영엽;엄상호
    • 제어로봇시스템학회논문지
    • /
    • 제17권3호
    • /
    • pp.254-257
    • /
    • 2011
  • This study was performed to development a dental three-dimensional laser scanning system and measure the accuracy of new adjustable lower dental impression trays. Multiple impressions of a resin master model were made with custom, stock and new adjustable trays and vinyl polysiloxane impression material. The lower master model and resulting cast were compared using an dental scanning system. Each 3D image was superimposed onto the lower master model image and analyzed with custom software. Multiple measurements of the lower master model and casts were analyzed to determine the accuracy of tray types.

하의 치수 체계에 관한 연구 -만 19 ~ 24세 여자를 중심으로- (A Study on the Sizing System for Clothes of Lower Body -females from l9 to 24 years old-)

  • 문명옥
    • 한국의류학회지
    • /
    • 제26권7호
    • /
    • pp.1036-1042
    • /
    • 2002
  • The purpose of this study was to set up the sizing system for clothes of lower body. Sample size was 191 females and their age ranges were from 19 to 24 years old. The lower body types for the sizing system were categorised by height and drop value of lower body(hip circumference-waist circumference). The results were as follows. 1. The Thick waist (drop value of lower body<21) and the Slender waist (drop value of lower body$\geq$27) had the low coverage rates of 14.2% and 11.5%, and the Normal waist (21$\leq$ drop value of lower body<27) had the high coverage rate of 72.8%. 2. The height could be divided into three groups and thar covered 97.5%. The Short(152cm) covered 2l.0%, the Regular(160cm) 58.7% and the Tall(168cm) 17.8%. 3. The size interval of hip circumference was 4cm and the intervals of waist circumference were 3cm and 4cm. The interval of slacks length was 4∼5cm according to three height groups.

Development of walking assist system for the people with lower limb-disability

  • Kim, Seok-Hwan;Izumi, Keisuke;Koujina, Yasuhiro;Ishimatsu, Takakazu
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.1495-1499
    • /
    • 2003
  • There is some equipment that helps user to exercise and to walk. But almost all equipments require some physical strength of their muscles. So we developed a system that could assist walking action of the people with lower-limb disability. The system called as walking stand adopted the balancing mechanism which assures the stable walking, and the 4 link-based mechanism that had 2 degrees of freedom on each leg. The walking stand uses four motors and has two sets of the special link-structure to simulate the human walking mechanism. With our system, even serious disabled with lower-limb disability may enjoy walking rehabilitation. And by adjusting the power, it can be used as the walking assistant mechanism instead of conventional wheelchairs. Experiments showed that our walking stand is applicable to the rehabilitation and also to the mobile device in our daily life for those people who do not have enough physical ability to walk by themselves.

  • PDF

Upper and lower solutions for a singular p-Laplacian system

  • Kim, Chan-Gyun;Lee, Eun-Kyoung
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제11권4호
    • /
    • pp.89-99
    • /
    • 2007
  • In this paper, we define the upper and lower solutions for a p-Laplacian system with singular nonlinearity at the boundaries. And we prove the theorem for the upper and power solutions method.

  • PDF

Designing an Intelligent Rehabilitation Wheelchair Vehicle System Using Neural Network-based Torque Control Algorithm

  • Kim, Taeyeun;Bae, Sanghyun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권12호
    • /
    • pp.5878-5904
    • /
    • 2017
  • This paper proposes a novel intelligent wheelchair vehicle system that enables upper limb exercises, lower limb standing exercises and rehabilitation training in a daily life. The proposed system, which can be used to prevent at least the degeneration of body movements and further atrophy of musculoskeletal system functions, considers the characteristics and mobility of the old and the disabled. Its main purpose is to help the old and the disabled perform their daily activities as much as they can, minimizing the extent of secondary disabilities. In other words, the system will provide the old and the disabled with regular and quantitative rehabilitation exercises and diagnosis using the wheelchair-based upper/lower limb rehabilitation vehicle system and then verify their effectiveness. The system comprises an electric wheelchair, a biometric module to identify individual characteristics, and an upper/lower limb rehabilitation vehicle. In this paper the design and configuration of the developed vehicle is described, and its operation method is presented. Moreover, to verify the tracking performance of the proposed system, dangerous situations according to biosignal changes occurring during the rehabilitation exercise of a non-disabled examinee are analyzed and the performance of the upper/lower limb rehabilitation exercise function depending on muscle strength is evaluated through a neural network algorithm.

공동주택의 윗목/아랫목 온돌 제어시스템 개발 및 평가 (Development and Evaluation of the Upper & Lower side Ondol System in Apartment Houses)

  • 조동우;유기형;유정연;정해권;김연홍;김상호;은민;양인호
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.627-636
    • /
    • 2008
  • The purpose of this study is to develop the new korean district heating system for apartment houses. The upper & lower side ondol system with multi sensing control system was developed as a new korean district heating system and evaluated in 2 mock-up laboratories last winter. As a result of field measurement, when the load differences between perimeter zone and central zone are increased, the ondol system divided in the upper and lower side can be evaluated as the new ondol system with a capability for suppling proper heating energy for each zone. The user can have the freedom for changing an upper zone and a lower zone and controlling each temperature according to their needs.

  • PDF