• 제목/요약/키워드: Low-voltage high-current rectifier

검색결과 103건 처리시간 0.023초

Twin converter를 이용한 전자식 안정기에 관한 연구 (A Study on Electronic Ballast using the Twin Converter)

  • 한홍일
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2000년도 전력전자학술대회 논문집
    • /
    • pp.86-89
    • /
    • 2000
  • The rectifier circuit has been used in the various fields of inverter progress. This is simple and low price. Otherwise it has many problems in harmonic low power factor and etc. This paper use the twin converter of two jewel booster. It doesn't need the detection of voltage current and control PWM. The twin converter has stably the rectification source. Also the circuit is used a half-bridge inverter in the electronic ballast for lighting. Therefore this method is confirmed in high efficiency.

  • PDF

반파정류를 이용한 형광램프용 전자식 스타터의 개발 (Development of an electronic starter using a half-wave rectifier for fluorescent lamps)

  • 이동호;송상빈;여인선
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 F
    • /
    • pp.2088-2090
    • /
    • 1998
  • A low-cost electronic starter is developed to decrease ignition failure significantly through successive starting trial and to prevent overheating at the end of fluorescent lamp life. Moreover, it has an additional feature of being capable of ignition at the recovered lamp voltage without any circuit correction. The developed electronic starter is consisted of four parts - a half wave rectifier circuit, a timer circuit, a switching circuit and a protection circuit. The protection circuit made up of a transistor and capacitors utilizing capacitive characteristics, carries out successive starting trial and end-of-life protection. Lamp ignition is completed within 0.5 seconds with taking advantage of a high preheating current from the half-wave rectifier circuit. Nevertheless, its performance is proved to be very excellent through a standard switching endurance test.

  • PDF

개선된 보조전원장치에 의한 고조파 저감대책 (Harmonic Reduction Scheme By the Advanced Auxiliary Voltage Supply)

  • 윤두오;윤경국;김성환
    • 해양환경안전학회지
    • /
    • 제21권6호
    • /
    • pp.759-769
    • /
    • 2015
  • 본 논문에서는 12펄스 정류기의 커패시터 중앙 DC버스에 개선된 보조전원장치를 설치하는 방법을 제안하였다. 11차 및 13차 고조파가 감소하는 이론적인 배경을 다루었으며 부하전류의 크기, 전원전압의 위상 및 크기, 커패시터 전압에 따라 개선된 보조전원의 파형 및 크기가 어떻게 제어되어야 하는지를 제시하였다. 기존의 구형파 보조전원장치를 적용한 경우는 전 영역에서 고조파 왜형률이 6~60[%]로 큰 편차를 보이지만 본 눈문에서 제안하는 개선된 보조전원장치를 적용한 경우 저 부하에서 고 부하에 이르는 전 영역에서 57~71[%] 라는 안정되고 뛰어난 고조파 왜형율 저감 효과를 보인다. 특히 10[%] 부하상태에서 기존방식은 고조파 왜형율 저감 효과가 6[%]로 효과가 거의 없지만 제안된 방식은 71[%]라는 놀라운 저감성능을 보여주고 있다. 소프트웨어 PSIM을 활용하여 컴퓨터 시뮬레이션을 통해 제안된 방식의 유효성을 입증하였다.

Novel Punch-through Diode Triggered SCR for Low Voltage ESD Protection Applications

  • Bouangeune, Daoheung;Vilathong, Sengchanh;Cho, Deok-Ho;Shim, Kyu-Hwan;Leem, See-Jong;Choi, Chel-Jong
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권6호
    • /
    • pp.797-801
    • /
    • 2014
  • This research presented the concept of employing the punch-through diode triggered SCRs (PTTSCR) for low voltage ESD applications such as transient voltage suppression (TVS) devices. In order to demonstrate the better electrical properties, various traditional ESD protection devices, including a silicon controlled rectifier (SCR) and Zener diode, were simulated and analyzed by using the TCAD simulation software. The simulation result demonstrates that the novel PTTSCR device has better performance in responding to ESD properties, including DC dynamic resistance and capacitance, compared to SCR and Zener diode. Furthermore, the proposed PTTSCR device has a low reverse leakage current that is below $10^{-12}$ A, a low capacitance of $0.07fF/mm^2$, and low triggering voltage of 8.5 V at $5.6{\times}10^{-5}$ A. The typical properties couple with the holding voltage of 4.8 V, while the novel PTTSCR device is compatible for protecting the low voltage, high speed ESD protection applications. It proves to be good candidates as ultra-low capacitance TVS devices.

새로운 고전압 대전력용 24펄스 다이오드 정류기 시스템 (A New 24-Pulse Diode Rectifier for High Voltage and High Power Application)

  • 최세완;김기용
    • 전력전자학회논문지
    • /
    • 제4권3호
    • /
    • pp.304-309
    • /
    • 1999
  • 본 논문에서는 새로운 24펄스 다이오드 정류기 시스템을 제안한다. 제안하는 다이오드 정류기 시스템은 기존의 직렬형 12펄스 다이오드 정류기에 수동의 보조회로를 추가함으로서 구성되어지고, 입력전류는 제 22차까지의 고조파가 제거되어 거의 정현파에 가까운 전류 파형을 얻는다. 또한, 출력 전압은 n=24k, k=1,2,3... 의 고조파 성분을 갖는 24펄스 특성를 나타낸다. 더욱이, 이 보조회로의 용량은 출력용량에 비하여 매우 작으며, 능동 스위칭소자를 사용하지 않으므로 외란에 강하고 구현이 간단하다. 따라서, 본 방식은 중·대용량급의 고전압 비제어(uncontrolled) 직류전원이 필요한 인버터나 무정전 전원장치등의 앞단에서 입력고조파의 저감에 경제적이고 효율적이다. 220V, 3KVA 정류기 시스템의 실험을 통하여 제안한 시스템의 타당성을 검증하였다.

  • PDF

전류센서리스 단위역률 3상 PWM AC/DC Boost 컨버터 (Current Sensorless Three Phase PWM AC/DC Boost Converter with Unity Power Factor)

  • 천창근;김철우
    • 조명전기설비학회논문지
    • /
    • 제17권6호
    • /
    • pp.105-112
    • /
    • 2003
  • AC/DC 전력변환장치로서 위상제어 컨버터나 출력전압을 제어할 수 없는 다이오드 정류기는 역률저하 및 저차고조파 발생의 문제점을 가진다. 본 논문에서는 역률개선 및 고조파 감소의 문제점을 극복하기 위하여 3상 PWM AC/DC Boost 컨버터에 대해 연구하였다. 제안한 컨버터의 특성은 입력 단에 전류 센서 없이 전압 센서만을 사용하여 입력전류의 위상을 조정하는 비교적 간단한 알고리즘으로 단위역률을 구현하였으며, 일정 주파수로 스위칭 소자를 구동시키는 정현 PWM 방식을 채용하여 불규칙한 스위칭 주파수 방식에서 나타나는 입력필터의 설계 및 스위칭 소자 선정에 대한 어려움을 극복하였다. 본 논문에서 제안한 제어알고리즘을 시뮬레이션 한 결과 부하영역 및 발전영역에서도 단위역률이 잘 이루어졌으며 DC link 단의 출력전압이 거의 리플 없이 다이나믹한 응답특성을 보였다. 또 시뮬레이션으로 얻어진 회로정수를 바탕으로 인덕터 및 커패시터의 용량을 적절한 크기로 산정하여 실험 에 적용한 결과 같은 부하조건에서 다이오드 정류기와 비교하여 역률 및 저차 고조파가 현저하게 개선되었음을 알 수 있었다.

A Bidirectional Single-Stage DC/AC Converter for Grid Connected Energy Storage Systems

  • Chen, Jianliang;Liao, Xiaozhong;Sha, Deshang
    • Journal of Power Electronics
    • /
    • 제15권4호
    • /
    • pp.1026-1034
    • /
    • 2015
  • In this paper, a unified control strategy using the current space vector modulation (CSVM) technique is proposed and applied to a bidirectional three-phase DC/AC converter. The operation of the converter changes with the direction of the power flow. In the charging mode, it works as a buck type rectifier; and during the discharging mode, it operates as a boost type inverter, which makes it suitable as an interface between high voltage AC grids and low voltage energy storage devices. This topology has the following advantages: high conversion efficiency, high power factor at the grid side, tight control of the charging current and fast transition between the charging and discharging modes. The operating principle of the mode analysis, the gate signal generation, the general control strategy and the transition from a constant current (CC) to a constant voltage (CV) in the charging mode are discussed. The proposed control strategy has been validated by simulations and experimental results obtained with a 1kW laboratory prototype using supercapacitors as an energy storage device.

역률 보정회로(PFC)를 이용한 출력 가변형 정류기 개발에 관한 연구 (A Development of Variable Output type Rectifier by PFC)

  • 이춘모;장용주
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.70-74
    • /
    • 2003
  • The buck-boost converter is employed as the variable output PFC power stage. From the loss analysis, this topology has a high efficiency from light load to heavy load. A modified input current sensing scheme is presented to overcome the problem of the insufficient phase margin for the PFC circuit near the maximum output voltage. The variable output PFC circuit has a good performance in the wide output voltage range, under both the Boost mode when the output voltage is high and the Buck+Boost mode when the output voltage is low.

  • PDF

Output inductor-less active clamp forward converter employing current boost-up circuit for high power density adaptor

  • Lee, Keun-Wook;Choi, Seong-Wook;Lee, Byoung-Hee;Moon, Gun-Woo
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.403-405
    • /
    • 2008
  • This paper proposes an output inductor-less active clamp forward converter employing current boost-up circuit for high power density adaptor. By applying the proposed current boost-up circuit, the proposed converter has low conduction loss and low voltage ringing of the secondary rectifier. This paper presents the analysis of the proposed converter and a comparison between the proposed converter and the conventional converter through experiment.

  • PDF

선박 평형수 처리용 Phase Shift Full Bridge Converter 출력 제어 알고리즘 (An Output Control Algorithm for Phase Shift Full Bridge Converter for Ballast Water Treatment)

  • 이상리;김학원;조관열;정호철;김종혁;박귀철
    • 전력전자학회논문지
    • /
    • 제18권6호
    • /
    • pp.530-539
    • /
    • 2013
  • In large vessels, proper water level must be maintained with a balance for right and left equilibrium by absorbing or draining sea water in ballast water tank. However, this ship's ballast-water can be drained marine organisms to local sea area by world trade and this can be a source of ecological disturb. In order to solve these problems, marine organisms must be removed in accordance with the international covenant for the emission of microorganisms. By this reason, the seawater electrolysis rectifier of low-voltage high-current rectifiers with excellent ability for microbial treatment is required. In this paper, PSFB converter will be discussed for the seawater electrolysis rectifier. Furthermore, a new output control method with the power limit operation under the limited maximum voltage condition is proposed for this rectifier. The simulation for the proposed current control method for PSFB Converter is shown using MATLAB/SIMULINK. Finally the usefulness of the proposed control method is presented by the experimental results.