• 한국생활과학회지
• /
• 제22권6호
• /
• pp.673-686
• /
• 2013

The purpose of this study is to identify consumer needs and sensory evaluation of jacquard fabrics for blind using low melting polyester. Ten kinds of jacquard fabric used for this study were developed. Developed jacquard fabrics were assessed subjectively by 164 consumers using 7-point scale of 22 consumer needs and 43 sensory descriptors. The results were briefly summarized as follows: the most important parameter to choose fabric for blind was 'Easy-use' and the other parameters are 'Lightproof', 'UV-protect', 'Design', 'Price', 'Color', 'Insulation', 'Easy-care'. The image sensibility of jacquard fabrics was explained by six factors: feminine, active, modern, traditional, pure, cozy. Higher preference was found in jacquard fabrics of clear, natural, luxurious, simple, feminine, young, cozy, graceful image. The preference was predicted 38.2% with feminine, modern, pure, cozy, traditional factors. Correlation coefficient between image sensibility factor 1 and preference was 0.437. The 3 factors (feminine, modern, pure)were selected as significant image sensibility affecting preference.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.48-52
• /
• 2003

Low melting crystalline solder glasses for CRT sealing were prepared from the composition of PbO 73.0~75.5 wt%, ZnO 12~15 wt%, $B_2O_3$ 7.0~9.0 wt%, BaO 1.5~3.5 wt%, $P_2O_5$ 1.0~2.5 wt%, $Bi_2O_3$ 0.5~20 wt%. The nucleation and crystallization of the crystalline solder glasses were studied by DTA, SEM and XRD. $2PbO{\cdot}ZnO{\cdot}B_2O_3$ crystalline phase was formed from glass matrix by heat-treatment of glass frits Crystalline solder glasses developed from this paper have good firing condition of $430{\sim}440^{\circ}C$ for 10min and good physical properties

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.467-476
• /
• 2013

This study investigates the dyeability and the fastness of flame retardant polyester fabric developed by a thermal bonding with a low melting component of flame retardant bicomponent filament (LMFRPC). The fabrics were prepared with flame retardant polyester filaments (FRP) as warp and blended filaments of FRP and LMFRPC as weft. The LMFRPC have a sheath and a core where the core comprises a flame retardant polyester and the sheath comprises a thermoplastic polyester with a low-melting point. The thermal bonding of fabric was conducted in a pin tenter at $170^{\circ}C$ for 60 seconds. Fabric dyeing was conducted with an infrared dyeing machine at various dyeing temperatures and dyeing times. The dyestuffs used in this study were CI disperse Yellow 54, Red 60 and Blue 56 of E-type dyestuff and Orange 30, Red 167 and Blue 79 of S-type dyestuff. This study investigated the morphology of thermal bonded fabric, dyeability and fastness of dyed fabric. Dyeability increased with an increased dyeing temperature. The thermal bonded area increased with the increased LMFRPC content. The dyeability of S-type dyestuff was higher than E-type dyestuff; in addition, the saturated dyeing time was about 20minutes at $130^{\circ}C$ for E and S-type dyestuff. The fastness to washing and rubbing were excellent at a 4-5 Grade.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권6호
• /
• pp.74-80
• /
• 1997

본 논문에서는 저압 배전용 전선퓨즈의 I-t 특성을 다루었다. 전선퓨즈 엘리먼트는 과전류 영역을 담당하는 낮은 온도 용융영역(LTME)과, 대전류 영역을 담당하는 높은 온도 용융영역(HTME)으로 나누어 진다. 이들부분에 의하여 퓨즈의 용단특성이 결정되는 것이다. 따라서 이들 부분에 대한 열적, 전기적인 특성을 시뮬레이션하므로서, 퓨즈 엘리먼트 설계의 타당성을 이론적으로 검증하였다. 유한요소법(Finite Element Method)을 이용하여 전선퓨즈의 I-t특성을 시뮬레이션 하였다. 그리고 시뮬레이션 결과와 실혐결과를 비교해 보았을 때 대전류영역과 소전류영역에서의 상당히 유사한 결과를 얻을 수 있었다.

• 전기학회논문지
• /
• 제67권12호
• /
• pp.1619-1625
• /
• 2018

Portable electronic devices secondary batteries can cause fire and explosion due to micro-current change in addition to the situation of short-circuit inrush current, safety can not be secured with a general operation limited current fuse. Therefore, in secondary battery, it is necessary for the protector to satisfy both the limit current type operation in the open-short-circuit inrush current and the current detection operation characteristic in the micro current change situation and for this operation, a fuse for the current detection type secondary battery protection circuit can be applied. The purpose of this study is to design a protection device that operates stably in the hazardous situation of small capacity secondary battery for portable electronic devices through the design of low melting fuse elements alloy of sensing type fuse and secures stability in abnormal current state. As a result of the experiment, I-T and V-T operation characteristics are satisfied in a the design of the alloy of the current sensing type self-contained low melting point fuse and the resistance of the heating resistor. It is confirmed that it can prevent accidents of short circuit over-current and micro current change of secondary battery.

• 한국주조공학회지
• /
• 제17권6호
• /
• pp.598-607
• /
• 1997

Fractional melting process involves heating an alloy within its liquid-solid region simultaneously ejecting liquid from the solid-liquid mixture. The extent of the purification obtained is comparable to that obtained in multi-pass zone refining. The new fractional melting process in which centrifugal force was used for separating the liquid from the mixture has been developed and applied to the purification of the metallic grade. Refining ratio depends on partition ratio, cake wetness and diffusion in the solid, and it was controlled by various processing parameters such as rotating speed and heating rate. The new parameter called "refining partition coefficient" has been suggested to estimate the effects of processing variables on the refining ratio. Because major impurities in MG-silicon such as Fe, Al, Ni have a low segregation coefficient, good purification effect is expected. The results of refining MG-silicon(98%) showed that 3N-Si was obtained in refined solid of 50% of the original sample.

• 동력기계공학회지
• /
• 제15권4호
• /
• pp.42-47
• /
• 2011

The purpose of this study is to investigate the best melting condition with various winding number of a heating pipe, supplying quantity of engine coolant and coolant temperature at the inlet of the heating pipe. Also, it is to suggest getting method of an appropriate quantity of the agent for the urea-SCR system within 10 minutes. For this matter, this study identifies the temperature distribution of inside of urea-tank while it is frozen at the low temperature condition, and suggests the best melting condition of the frozen urea within 10 minutes. From the results, it was found that 2L of melted urea was obtained by the coolant flow rate of 200L/hr at $70^{\circ}C$ for 10 minutes from the start of engine operating.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.292-295
• /
• 2001

The NdBaCuO superconducting samples were prepared by the Zone melting under low oxygen partial pressure. After the zone-melting the oxygenation process of the NdBaCuO samples in a oxygen flow furnace was studied. In order to compare the oxygenation condition the sintering NdBaCuO samples were studied also. In the study it is found that the optimum temperature for the oxygenation is $350^{\circ}C$, and the oxygen flow speed, the sample volume and the surface area of the sample would influence the oxygenation and the oxygen content.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.292-295
• /
• 2001

The NdBaCuO superconducting samples were prepared by the Zone melting under low oxygen partial pressure. After the zone-melting the oxygenation process of the NdBaCuO samples in a oxygen flow furnace was studied. In order to compare the oxygenation condition the sintering NdBaCuO samples were studied also. In the study it is found that the optimum temperature for the oxygenation is $350{\circ}C$, and the oxygen flow speed, the sample volume and the surface area of the sample would if1uence the oxygenation and the oxygen content.

• 대한기계학회논문집B
• /
• 제40권1호
• /
• pp.1-7
• /
• 2016

환원제를 이용하여 배기가스 내의 NOx를 질소로 환원시키는 요소수 SCR 시스템은 다른 후처리 장치들 중에서 가장 효율적인 장치로 알려져 있다. 차량에 적용되는 SCR 장치는 32.5wt%의 공융혼합물을 이용한다. 이러한 혼합물의 가장 큰 장점 중의 하나는 $-11.7^{\circ}C$에서 얼기 때문에 추운 환경에서 응고를 피할 수 있다는 것이다. 한편, 이러한 추운 환경에서 시동시 필요한 수용액을 충분히 공급하기 위해서는 고체상을 가열해야 한다. 따라서 본 연구에서는 Fluent 상용코드를 이용하여 3차원 비정상 전산해석을 통한 냉각수 및 전기가열 방식에 따른 고체상 요소수의 시간에 따른 액상비 및 온도분포와 같은 해동 및 열전달 특성을 고찰하였다. 본 연구를 통하여 전기히터 가열 방식이 냉각수 방식보다 효율적임을 확인하였다.