DOI QR코드

DOI QR Code

Frozen and Melting Characteristics of Urea-aqueous Solution for Urea-SCR System by Circulation of Engine Coolant

엔진 냉각수 순환에 의한 urea-SCR 시스템용 요소수의 동결 및 해동 특성

  • 최병철 (전남대학교 기계시스템공학부) ;
  • 김영권 (전남대학교 대학원 기계공학과) ;
  • 김화남 (전남대학교 BK21 지능형기계시스템사업단)
  • Received : 2011.03.07
  • Accepted : 2011.05.22
  • Published : 2011.08.31

Abstract

The purpose of this study is to investigate the best melting condition with various winding number of a heating pipe, supplying quantity of engine coolant and coolant temperature at the inlet of the heating pipe. Also, it is to suggest getting method of an appropriate quantity of the agent for the urea-SCR system within 10 minutes. For this matter, this study identifies the temperature distribution of inside of urea-tank while it is frozen at the low temperature condition, and suggests the best melting condition of the frozen urea within 10 minutes. From the results, it was found that 2L of melted urea was obtained by the coolant flow rate of 200L/hr at $70^{\circ}C$ for 10 minutes from the start of engine operating.

Keywords

References

  1. T. V. Johnson, 2010, "Review of Diesel Emissions and Control", SAE paper 2010-01-0301.
  2. 최병철, 서충길, 명광재, 2009, "디젤차량 SCR 시스템용 요소수용액의 동결과 해동 현상", 한국동력기계학회지, 13, 4, pp. 5-10.
  3. L. L. C. Chrysler, "Thermal Analysis of Urea Tank Solution Warm Up for Selective Catalytic Reduction (SCR)", SAE paper 2010-01-0971.
  4. W. Stefan, 2007, "Numerical heat transfer and thermal engineering of AdBlue(SCR) tanks for combustion engine emission redcuction", Applied Thermal Engin., 27, pp. 1790-1798. https://doi.org/10.1016/j.applthermaleng.2007.01.008
  5. BASF, 2003, "Urea solution 32.5% AdBlue", Technical Leaflet, BASF AG.
  6. A. Munnannur and Z. G. Li, 2010, "Development and Validation of a Predictive Model for DEF Injection and Urea Decomposition in Mobile SCR DeNOx Systems", SAE paper 2010-01-0889.
  7. C. Lambert, C. Montreuil and J. Vanderslice, 2003, "Application of Organic Freeze-Point Depressants in Aqueous Urea Solutions: Effect on NOx Reduction", SAE paper 2003-01-0775.
  8. F. Espinosa, R. Avila., J. G. Cervantes, F. J. Solorio, 2004, "Numerical simulation of simultaneous freezing-melting problems with natural convection", Nuclear Engin. and Design, 232, pp. 145-155. https://doi.org/10.1016/j.nucengdes.2004.06.005
  9. G. Vidalain, L. Gosselin, M. Lacroix, 2009, "An enhanced thermal conduction model for the prediction of convection dominated solid-liquid phase change", Int. J. of Heat and Mass Transfer 52, pp. 1753-1760. https://doi.org/10.1016/j.ijheatmasstransfer.2008.09.020