• 한국재료학회지
• /
• 제14권5호
• /
• pp.353-357
• /
• 2004

The influences of the ozone oxidation, reaction temperature and NaOH equivalent ratio on the iron oxide formation were studied with fixed ferrous sulfate concentration(0.5M $FeSO_4$ㆍ$7H_2$O). Geothite($\alpha$-FeOOH) and/or Magnetite ($Fe_3$$O_4$) were synthesized depending on the reaction conditions. The characteristics of the synthesized powders were evaluated by XRD, SEM and quantitative phase analysis. The synthetic conditions to get Goethite were quite different from the results of Kiyama's and the Goethite was conveniently synthesized at low temperature and at low NaOH equivalent ratio.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.418-419
• /
• 2007

플라즈마 열화학기상 증착법으로 Fe-Ni-Co 3원계 측매합금을 이용하여 $442^{\circ}C$의 저온에서 다중벽 탄소나노튜브를 합성하였다. 수소의 유량이 일정할 때 아세틸렌의 유량이 감소함에 따라 성장속도가 증가하였다. 합성된 탄소나노튜브는 약 8.4 nm의 직경과 $5.5\;{\mu}m$의 길이를 보였으며, 기판에 대해 수직으로 성장되었다. 4인치 웨이퍼 위에서도 전면적에서 균일한 성장을 보였다.

• 한국전기전자재료학회논문지
• /
• 제27권5호
• /
• pp.317-321
• /
• 2014

Hydrothermal synthesis technique could be carried out for growth of ZnO nanowires at relatively low process temperature, and it could be freely utilized with various substrates for fabrication process of functional electronic devices. However, it has also a demerit of relatively slow growth characteristics of the resulting ZnO nanowires. In this paper, an external DC bias of positive and negative 0.5 [V] was applied in the hydrothermal synthesis process for 2~8 [h] to prepare ZnO nanowires on a seed layer of AZO with high electrical conductivity. Growth characteristics of the synthesized ZnO nanowires were analyzed by FE-SEM. Material property of the grown ZnO nanowires was examined by PL analysis. The ZnO nanowires grown with positive bias revealed distinctively enhanced growth characteristics, and they showed a typical material property of ZnO.

• Advances in nano research
• /
• 제1권2호
• /
• pp.93-103
• /
• 2013

An ultrasonic-mediated assisted stepwise method has been developed for depositing transparent ZnO films from aqueous solution. Rinsing in low ethylene glycol temperature was easy to produce intermediate phase of $Zn(OH)_2$, rinsing in $120^{\circ}C$ ethylene glycol was observed the diffraction peak of intermediate $Zn(OH)_2$ in early report, the rinsing temperature plays an important role in the process of $Zn(OH)_2$ phase transformed to ZnO, high rinsing temperature actually improved the intermediate phase. However, the effect of rinsing on the intermediate phase is yet to be understood clearly. The effect of different rinsing procedures, involving either of or a combination of successive ionic layer adsorption and reaction (SILAR) and ultrasonic-assisted rinsing, prior to hydrolysis in ethylene glycol was found to improve the occurrence $Zn(OH)_2$ in ZnO thin films. In the zinc complex ($[Zn(NH_3)_4]^{2+}$) solution, excess ($[Zn(NH_3)_4]^{2+}$) absorbed in glass substrate transformed incompletely to ZnO and exist as $Zn(OH)_2$ phase in thin films. In films deposited at low temperature, rinsing procedure is applied to improve excess $Zn(OH)_2$ and obtain smoother transparent thin films.

• 한국분말재료학회지
• /
• 제28권1호
• /
• pp.44-50
• /
• 2021

Zinc selenide (ZnSe) nanoparticles were synthesized in aqueous solution using glutathione (GSH) as a ligand. The influence of the ligand content, reaction temperature, and hydroxyl ion concentration (pH) on the fabrication of the ZnSe particles was investigated. The optical properties of the synthesized ZnSe particles were characterized using various analytical techniques. The nanoparticles absorbed UV-vis light in the range of 350-400 nm, which is shorter than the absorption wavelength of bulk ZnSe particles (460 nm). The lowest ligand concentration for achieving good light absorption and emission properties was 0.6 mmol. The reaction temperature had an impact on the emission properties; photoluminescence spectroscopic analysis showed that the photo-discharge characteristics were greatly enhanced at high temperatures. These discharge characteristics were also affected by the hydroxyl ion concentration in solution; at pH 13, sound emission characteristics were observed, even at a low temperature of 25℃. The manufactured nanoparticles showed excellent light absorption and emission properties, suggesting the possibility of fabricating ZnSe QDs in aqueous solutions at low temperatures.

• KSBB Journal
• /
• 제24권1호
• /
• pp.96-100
• /
• 2009

본 연구에서는 저온에서의 재조합 단백질 생산성 향상을 위하여 저온에서 RNA 샤페론 활성을 지닌다고 알려진 CspA 단백질의 발현이 서로 다른 온도에서 대장균의 성장 및 GFP의 발현 속도에 어떻게 영향을 미치는지를 살펴보았다. $20^{\circ}C$, $25^{\circ}C$, $37^{\circ}C$에서는 세포 성장 및 GFP의 생산이 CspA의 발현에 영향을 받지 않았으나, $15^{\circ}C$에서는 GFP의 총 생산성이 CspA의 동시 발현에 의해 향상되었으며 이는 세포 성장 속도의 향상에 기인함을 확인하였다. 결론적으로 CspA의 발현은 $15^{\circ}C$에서 세포 당 재조합 단백질 생산량의 증가에는 영향을 미치지 않으나, 즉 재조합 단백질의 번역 효율에는 큰 영향을 미치지 않으나, 대장균 성장 속도에 영향을 미치며, 이를 통해 재조합 단백질의 총 생산량 향상을 유도 할 수 있을 것으로 기대된다.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.308-317
• /
• 2012

Reactive processing, such as reactive hot pressing (RHP) and reactive spark plasma sintering (R-SPS), is effective densification method to prepare $ZrB_2$-based ultra high temperature ceramics (UHTCs). The present paper reviewed some typical reactive processing of $ZrB_2$-based UHTCs. All the reactions from the starting materials in the reactive processing are thermodynamically favorable, which generate enough energy and driving force for the densification of the final products under a relatively low temperature. Besides, compared with non-reactive processing, anisotropic $ZrB_2$ grains, such as $ZrB_2$ platelets, can only be obtained in the reactive processing, resulting in an improvement of the mechanical properties.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1401-1413
• /
• 1994

The synthesis of kaolinite mineral from domestic diatomite for silica resource, commercial vailable gibbsite or alumina for alumina resource were made under various hydrothermal treatment, and the sythetic effect of acidic mineralizers, temperature treatment with time duration, particle size of alumina on formation of kaolinite mineral and the plastic properties of synthesized kaolinite were investigated. The various acidic mineralizers which are HCl, HNO3, H2SO4 and Oxalic acid were employed for hydrothermal reaction in the range of 0.01 mol/ι to 2 mol/ι concentration of each mineralizers. It was found that HCl in the level of 1 mol/ι solution produced highly yields of well-crystallized and platy form kaolinite mineral and gave the most effective extraction of iron oxide, compared to that of others, that HNO3 produced highly yield of kaolinite but lower extraction of iron oxide, that H2SO4 produced low yield of kaolinite and formed alunite mineral, and that oxialic acid formed spherical crystalline kaolinite and gave low extraction of iron oxide. Moreover, it showed that kaolinite minerals were well synthesized in a wide range of less than 2 mol/ι acids, but were poorly synthesized at more than 2 mol/ι acids. However, boehmite and kaolinite were coexistently formed in the temperature range of 18$0^{\circ}C$ and 20$0^{\circ}C$ when the calcined diatomite and gibbsite were involved. The well-ordered kaolinite mineral as a platy form was highly synthesized in the temperature range of 220 and 24$0^{\circ}C$, when the same marterials as above were used with treatment of 1 mol/ι HCl solution. The results also revealed that the size of crystalline platy form kaolinite, synthesized from alumina and calcined diatomite with treatment in 1 mol/ιHCl solution at 24$0^{\circ}C$, was much larger than that of gibbsite and calcined diatomite shown previously, and that kaolinite and corundum minerals were coexistently formed under any hydrothermal treatment conditions. The plasticity of synthesized kaolinite from under 2 ${\mu}{\textrm}{m}$ alumina and calcined diatomite was very poor, and that of the synthesized kaolinite from raw diatomite and gibbsite gave higher than that of calcined diatomite and gibbsite.

• 공업화학
• /
• 제34권4호
• /
• pp.434-443
• /
• 2023

세계적으로 가장 많이 사용되고 있는 리튬 그리스의 대체 물질로서 calcium sulfonate 그리스를 합성하여 성능을 개선하였다. Calcium sulfonate 그리스의 저온성 문제를 해결하기 위하여 PAO (poly alpha olefin) 기반의 기유와 증주제를 도입하였다. 본 연구에서는 파라핀 오일과 PAO 기반의 기유와 증주제로 calcium sulfonate 그리스 3종을 합성하였으며, PAO 기반의 기유와 수산화 리튬, 12-hydroxy stearic acid, sebacic acid의 비누화 반응으로 리튬 그리스 1종을 합성하였다. 합성한 calcium sulfonate 그리스 3종과 리튬 그리스의 형태, 미세 구조 및 작용기는 SEM 및 FT-IR로 분석하였다. 저온 특성은 rheometer, low temperature torque로 측정하였고, 트라이볼로지 특성은 four ball lubricant tester, SRV로 측정하였다. 그 결과, PAO 기반의 기유와 증주제로 합성된 calcium sulfonate 그리스는 -40℃에서도 유동할 수 있었으며, 기존 calcium sulfonate 그리스의 저온 특성의 한계점을 극복하였다. 또한 합성한 calcium sulfonate 그리스는 PAO 기유로 합성된 리튬 그리스보다 우수한 내마모성, 내하중성, 마찰계수, 내열성, 점착성 및 내부식성을 보였으므로 상업적으로 기존의 리튬 그리스를 대체할 수 있을 것으로 기대된다.

• 한국재료학회지
• /
• 제25권2호
• /
• pp.95-99
• /
• 2015

$NiAl_2O_4$ nanoparticle was synthesized by a reverse micelle processing for inorganic pigment. $Ni(NO_3)_2{\cdot}6H_2O$ and $Al(NO_3)_3{\cdot}9H_2O$ were used for the precursor in order to synthesize $NiAl_2O_4$ nanoparticles. The aqueous solution, which consisted of a mixing molar ratio of Ni/Al, was 1:2 and heat treated at $800{\sim}1100^{\circ}C$ for 2h. The average size and distribution of synthesized $NiAl_2O_4$ powders are in the range of 10-20 nm and narrow, respectively. The average size of the synthesized $NiAl_2O_4$ powders increased with an increasing water-to-surfactant molar ratio and heating temperature. The crystallinity of synthesized $NiAl_2O_4$ powder increased with an increasing heating temperature. The synthesized $NiAl_2O_4$ powders were characterized by X-ray diffraction analysis(XRD), a field emission scanning electron microscopy(FE-SEM), and a color spectrophotometer. The properties of synthesized powders were affected as a function such as a molar ratio and heating temperature. Results indicate that synthesis using a reverse miclle processing is a favorable process to obtain $NiAl_2O_4$ spinels at low temperatures. The procedure performed suggests that this new synthesis route for producing these oxides has the advantage of being fast and simple. Colorimetric coordinates indicate that the pigments obtained exhibit blue colors.