• 한국약용작물학회지
• /
• 제17권6호
• /
• pp.407-411
• /
• 2009

Hepatoprotective and antioxidant activities of Acer mono and A. okamotoanum were compared after being extracted by low temperature and high pressure (LTHP) at 20 MPa and $60^{\circ}C$ for 15 minutes. Extraction yield of both A. mono and A. okamotoanum was increased about 40~43% by this extraction process. On scavenging activities, the bark of A. okamotoanum from this extraction process showed the highest activity as about 97%. This value was higher than that from conventional water extraction and A. mono extracts. Both of A. mono and A. okamotoanum showed high ability on nitrite scavenging, but decreasing tendency according to increasing of pH. On SOD-like test, A. okamotoanum had the highest activity as 46.28% at $1.0\;mg/m{\ell}$ concentration. A. okamotoanum extracted by LTHP also showed the highest activity as 197.38% in adding $1.0\;mg/m{\ell}$ concentration. Generally, the extracts from low temperature and high pressure extraction process are higher hepatoprotective and antioxidant activities than that from conventional water extraction. It can conclude that the bark of A. okamotoanum has better biological activities than other parts of A. mono.

• Ocean and Polar Research
• /
• 제32권2호
• /
• pp.157-164
• /
• 2010

A marine alga, Spirulina maxima, was extracted under high pressure and low temperature conditions at 500 MPa and $60^{\circ}C$ for 5 and 10 min. A high pressure of 500 MPa was applied to improve process yields because of low temperature extraction. This method resulted in highest higher extraction yield of 26.1% (w/w) in comparison to those results obtained from conventional extraction methods which produced a yield of 17.6% (w/w) from water. The extracts from this process also showed 19% of low cytotoxicity against human normal fibroblast cells in adding 1.0 mg/ml of the highest concentration. The crude extract significantly reduced the production of Prostaglandin $E_2$ ($PGE_2$) from CCD-986sk cells and increased nitric oxide production by macrophages. These higher activities of enhancing skin immune functions were found to have high antioxidant extract properties, like a 98% increase in DPPH radical scavenging activity. The extracts from the high pressure process showed a higher elution of active components than other processes and generated new compounds based on HPLC analysis. This clearly indicates that the extracts from high pressure and low temperature conditions have higher skin immune activation properties that have not been previously reported.

• 한국약용작물학회지
• /
• 제16권6호
• /
• pp.439-445
• /
• 2008

This study was performed to investigate a methodology of improving immune activities of Berberis koreana Palibin by ultra high pressure on low temperature extraction process. Extraction yield was enhanced up to more than 35% by above process, compare to the control and extraction average. The cytotoxicity on human kidney cell (HEK293) was showed below 20.4%, 21.6% in adding 1.0 mg/ml of the highest concentration. Generally, the extracts by ultra high pressure extraction process showed less toxicity about 5% than the other processes. It could tell that toxic materials that existing in the plant could be reduced or broken by ultra high pressure process due to can be broken bond such the hydrogen bond, the electrostatic bond, the van der Waals bond, and the hydrophobic bond, can be broken by high pressure. The result could be employed to develop a new type of functional food from B. koreana Palibin by low temperature high pressure process.

• 한국식품과학회지
• /
• 제41권3호
• /
• pp.284-291
• /
• 2009

본 연구에서는 저온고압 추출공정을 이용하여 전통적인 기존 추출공정과 비교함으로써 저온고압 추출공정에 의한 매자나무 수피의 항산화활성과 항암활성의 증진을 확인하고자 연구를 수행 하였다. DPPH radical 소거 활성은 5분 저온고압 처리한 추출물이 93%로 가장 높은 활성을 나타내며 대조군인 ascorbic acid의 95%와 유사한 활성을 나타내었다. 저온고압 추출공정을 통한 매자나무 추출물이 일반 열수 추출물과 비교해 xanthine oxidase 저해활성이 높게 나타났으며 특히 5분 저온고압 처리한 추출물이 56.68%의 높은 저해 활성을 나타냈다. 따라서 저온고압 추출공정을 통해 매자나무 추출물의 항산화 활성의 증진이 이루어졌음을 알수 있다. 항암활성 측정 결과, 매자나무 수피 추출물의 높은 항암활성을 확인하였으며 5분 저온고압 처리한 추출물의 암세포 억제 활성이 가장 높게 나타남에 따라 저온고압 추출공정을 통해 항암활성의 증진이 가능함을 확인하였다. 세포독성 측정 결과 5분 저온고압 추출물이 정상 세포에 대한 독성이 가장 높은데 반해 15분 저온고압 처리한 추출물의 세포독성이 제일 낮은 것으로 미루어 저온고압 추출물의 세포독성이 저온고압 추출시간의 영향을 받는 것으로 사료된다. 따라서 매자나무 수피의 생체적용이 가능한 기능성 소재로서의 이용 가능성을 확인할 수 있으며 저온 고압 추출공정의 최적화를 통한 활성물질의 추출 극대화를 통해 높은 경제적 가치를 부여해 줄 수 있을 것으로 사료된다.

• 한국식품과학회지
• /
• 제41권4호
• /
• pp.380-385
• /
• 2009

본 연구는 제주도의 녹조현상의 원인인 구멍갈파래의 활용을 위해 고압추출 공정을 통한 추출물의 면역활성 확인 하였다. 150 MPa, $80^{\circ}C$ 조건에서 Superoxide Radical 소거효과에서는 90% 로 활성도가 제일 높았으며, 면역세포 생육도면에서도 B&T cell, 각 각 $14.2{\times}10^4$ cells/mL $14.5{\times}10^4$ cells/mL 나타나 제일 높았다. 반면, NK cell과 NO 면역능 실험에서는 100MPa, $30^{\circ}C$ 조건에서 각각 $11.8{\times}10^2$ cells/mL, 30.0 ${\mu}M$을 보여 주었다. 결과를 통해 구멍갈파래는 면역활성을 가지며 고압 공정을 통한 추출물의 활성이 일반추출에 비해 높은 것을 알 수 있다. 따라서 해조류 및 다른 유용 자원에서도 고압 공정이 기존의 추출방법보다 높은 활성을 나타낼 것으로 판단되며 기능성 식품이나 기능성 소재로서 사용가능성이 있는 것으로 사료된다.

• 생약학회지
• /
• 제52권3호
• /
• pp.157-162
• /
• 2021

The heat-mediated reflux apparatus extraction of Paeonia lactiflora Pall. has been widely used as a traditional extraction method. In this paper, the microwave apparatus extraction method of Paeonia Radix was performed and the active ingredients and functional constituents were compared with the reference extraction method. The most effective extraction condition of albiflorin using the microwave was 120℃ in 50% methanol, and paeoniflorin was maximally extracted at 60℃. The reduced level of paeoniflorin molecule at high-pressure and high-temperature extraction condition was caused by the molecular instability. Additionally, the microwave extraction of 50% methanol extracts at 150℃ showed the highest functional constituents determined by in vitro DPPH radical scavenging activity, polyphenol concentration, and tyrosinase inhibition assay. The microwave apparatus was adapted as a rapid, low-cost, and environmentally friendly method to extract active ingredients and the practical extraction conditions of Paeonia Radix can be used in industrial applications.

• 한국분무공학회지
• /
• 제13권4호
• /
• pp.173-179
• /
• 2008

The current machinery and tools of secondary channel of the nuclear power plants were produced in the carbon-steel and low-alloy steel. What produced with the carbon-steel occurs wall thinning effect from flow accelerated corrosion by the fluid flow at high temperature, high pressure. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed. Wall thinning by flow accelerated corrosion occurs piping system, the heat exchanger, steam condenser and feedwater heaters etc,. Feedwater heaters of many nuclear power plants have recently experienced sever wall thinning damage, which will increase as operating time progress. This study describes the comparisons between the numerical results using the FLUENT code and experimental data of down scale model.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2631-2636
• /
• 2008

The most components and piping of the secondary side of domestic nuclear power plants were manufactured carbon-steel and low-alloy steel. Flow accelerated corrosion leads to wall thinning (metal loss) of carbon steel components and piping exposed to the flowing water or wet steam of high temperature, pressure, and velocity. The feedwater heaters of many nuclear power plants have recently experienced sever wall thinning damage, which increases as operating time progress. Several nuclear power plants in Korea have also experienced wall thinning damage in the shell wall around the impingement baffle. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the experimental results based on down-scaled experimental facility. The experiments were performed based on several types of impingement baffle plates which are installed in low pressure feedwater heater.

• 한국식품저장유통학회지
• /
• 제23권2호
• /
• pp.233-238
• /
• 2016

추출방법을 달리하여 달맞이꽃 에탄올 추출물의 주요성분과 항산화 및 항균 활성을 측정하였다. 상온교반 추출(SE, stirrer extraction), 초음파 추출(USE, ultrasonification extraction), 환류 추출(RE, reflux extraction), 고온가압추출(AE, autoclave extraction), 저온고압추출(LE, low temperature high pressure extraction)법을 사용한 결과 RE법이 추출수율(46.33%), 총 폴리페놀(463.05 mg GAE/g)과 플라보노이드(71.71 mg RHE/g) 함량이 다른 추출방법 보다 높았다. 달맞이꽃 추출물은 B. cereus에 대한 항균활성이 나타났으며, 추출방법에 따른 차이는 나타나지 않았다. DPPH와 ABTS radical 소거능, 환원력, 철이온 흡착능 시험에서도 RE법을 이용한 추출물이 각각 74.40%, 65.29%, 1.370 ($OD_{700}$), 90.14%를 나타내어 다른 추출방법에 비해 높았다. 달맞이꽃 추출물은 항산화 활성이 우수하여 유용한 천연물 소재로 사용이 가능하며, B. cereus가 주 원인이 되는 식중독의 예방이나 오염된 식품의 보존성 증진을 위한 천연 소재로 할용이 가능할 것으로 판단된다.