• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.11
• /
• pp.1568-1574
• /
• 2017

Objective: The effects of lactic acid bacteria (LAB) and cellulase enzyme on fermentation quality, microorganism population, chemical composition and in vitro gas production of sorghum silages were studied. Methods: Commercial inoculant Lactobacillus plantarum Chikuso 1 (CH), local selected strain Lactobacillus casei (L. casei) TH 14 and Acremonium cellulase (AC) were used as additives in sorghum silage preparation. Results: Prior to ensiling Sorghum contained $10^4LAB$ and $10^6cfu/g$ fresh matter coliform bacteria. The chemical compositions of sorghum was 26.6% dry matter (DM), 5.2% crude protein (CP), and 69.7% DM for neutral detergent fiber. At 30 days of fermentation after ensiling, the LAB counts increased to a dominant population; the coliform bacteria and molds decreased to below detectable level. All sorghum silages were good quality with a low pH (<3.5) and high lactic acid content (>66.9 g/kg DM). When silage was inoculated with TH14, the pH value was significantly (p<0.05) lower and the CP content significantly (p<0.05) higher compared to control, CH and AC-treatments. The ratio of in vitro methane production to total gas production and DM in TH 14 and TH 14+AC treatments were significantly (p<0.05) reduced compared with other treatments while in vitro dry matter digestibility and gas production did not differ among treatments. Conclusion: The results confirmed that L. casei TH14 could improve sorghum silage fermentation, inhibit protein degradation and decrease methane production.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.5
• /
• pp.435-440
• /
• 2012

Objective : The purpose of this study is to find the optimal stiffness and volume of bone cement and their biomechanical effects on the adjacent vertebrae to determine a better strategy for conducting vertebroplasty. Methods : A three-dimensional finite-element model of a functional spinal unit was developed using computed tomography scans of a normal motion segment, comprising the T11, T12 and L1 vertebrae. Volumes of bone cement, with appropriate mechanical properties, were inserted into the trabecular core of the T12 vertebra. Parametric studies were done by varying the volume and stiffness of the bone cement. Results : When the bone cement filling volume reached 30% of the volume of a vertebral body, the level of stiffness was restored to that of normal bone, and when higher bone cement exceeded 30% of the volume, the result was stiffness in excess of that of normal bone. When the bone cement volume was varied, local stress in the bony structures (cortical shell, trabecular bone and endplate) of each vertebra monotonically increased. Low-modulus bone cement has the effect of reducing strain in the augmented body, but only in cases of relatively high volumes of bone cement (>50%). Furthermore, varying the stiffness of bone cement has a negligible effect on the stress distribution of vertebral bodies. Conclusion : The volume of cement was considered to be the most important determinant in endplate fracture. Changing the stiffness of bone cement has a negligible effect on the stress distribution of vertebral bodies.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.539-547
• /
• 1985

The low-cycle fatigue crack growth behavior of SUS 304 Stainless steel was investigated at 650.deg. C by the nonlinear fracture mechanics. Crack Propagation can be separated in to cycle-dependent and time-dependent, the former is correlated with .DELTA. $J_{f}$ , J-intergral range and the latter is correlated with J', modified J integral. Transition from cycle-dependent to time-dependent crack growth was successfully predicted using the .betha. hypothesis, which was proposed by the authors on the basis of an analysis on the interaction of elastic and creep strain. To investigate the reliability of .betha.-hypothesis, experimenting by the change of stress-level, stress rate and frequency, following conclusions were obtained. (1) High temperature fatigue crack propagation was separated into cycle-dependent and time-dependent. (2) Transition of crack propagation was predicted by .DELTA. $J_{c}$/.DELTA.$_{f}$ or .betha. (3) Lower limit in cycle-dependent crack propagation was obtained..

• KSBB Journal
• /
• v.18 no.5
• /
• pp.398-403
• /
• 2003

Due to the low biodegradability of dyes, conventional biological wastewater treatment systems are inefficient in treating dye wastewater. Various white-rot fungi were investigated for the decolorization of six industrial dyes (reactive blue 5, reactive blue 16, reactive black 5, acid black 52, reactive orange 16, and acid violet 43). Among ten fungi, T. versicolor KCTC 16781 was selected as a testing strain because this had the best performance of decolorization for six dyes from the results of the solid culture experiments. In liquid culture medium, T. versicolor KCTC 16781 decolorized over 96% of six dyes for 48 hrs. Laccase started to produce in the early stage of the culture, and showed the highest peak value of 2.3 U/mL in 24 hrs. Enzyme activity remained constant until the end of culture. Fungal decolorization is a promising alternative to replace or supplement present treatment process.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.4
• /
• pp.510-515
• /
• 2012

A recombinant putative dextransucrase (DexT) was produced from Leuconostoc citreum KM20 as a 160 kDa protein, but its productivity was very low (264 U/l). For optimization, we examined enzyme activity in 7 Escherichia coli strains with inducer molecules such as lactose or IPTG. E. coli BL21-CodonPlus(DE3)-RIL exhibited the highest enzyme activity with lactose. Finally, DexT activity was remarkably increased by 12-fold under the optimized culture conditions of a cell density to start induction ($OD_{600}$) of 0.95, a lactose concentration of 7.5 mM, and an induction temperature of $17^{\circ}C$. These results may effectively apply to the heterologous expression of other large DexT genes.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.1
• /
• pp.108-112
• /
• 2009

A simplified method for the purification of cholera toxin was developed. The 569B strain of Vibrio cholerae, a recognized hyper-producer of cholera toxin, was propagated in a bioreactor under conditions that promote the production of the toxin. The toxin was separated from the bacterial cells using 0.2-${\mu}m$ crossflow microfiltration, the clarified toxin was passed through the membrane into the permeate, and the bacterial cells were retained in the retentate. The 0.2-${\mu}m$ permeate was then concentrated 3-fold and diafiltered against 10 mM phosphate buffer, pH 7.6, using 30-kDa crossflow ultrafiltration. The concentrated toxin was loaded onto a cation exchange column, the toxin was bound to the column, and most of the impurities were passed unimpeded through the column. The toxin was eluted with a salt gradient of phosphate buffer, pH 7.0, containing 1.0 M NaCl. The peak containing the toxin was assayed for cholera toxin and protein and the purity was determined to be 92%. The toxin peak had a low endotoxin level of $3.1\;EU/{\mu}g$ of toxin. The purified toxin was used to prepare antiserum against whole toxin, which was used in a $G_{M1}$ ganglioside-binding ELISA to determine residual levels of toxin in an oral inactivated whole-cell cholera vaccine. The $G_{M1}$ ganglioside-binding ELISA was shown to be very sensitive and capable of detecting as little as 1 ng/ml of cholera toxin.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.11
• /
• pp.2060-2069
• /
• 2017

Newcastle disease is a serious infectious disease in the poultry industry. The commercial vaccines can only offer limited protection and some of them are expensive and need adjuvants. At present, DNA vaccines are widely used. However, the immune responses induced by DNA vaccines are too slow and low. Here, we constructed the transfer vectors with a different number of C3d as molecular adjuvants (n = 1, 2, 4, or 6), and the vectors were cloned into the optimal eukaryotic expression plasmid (pVAXI-optiF) that expressed the F gene of Newcastle disease virus (NDV), and named pVAXI-F(o)-C3d1, pVAXI -F(o)-C3d2, pVAXI-F(o)-C3d4, and pVAXI-F(o)-C3d6, respectively. Cell transfection test indicated that pVAXI-F(o)-C3d6 showed the highest expression. In vivo immunization showed that the chickens immunized with pVAXI-F(o)-C3d6 intramuscularly induced better immune responses than the chickens immunized with the other plasmids. The protective efficacy of pVAXI-F(o)-C3d6 was 80% after challenge with the highly virulent NDV strain F48E9. The results in this study showed that C3d6 could be used as a molecular adjuvant to quickly induce an effective immune response to control NDV.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.153-160
• /
• 2016

Purpose: This study was conducted to experimentally investigate the structural safety of and identify critical locations in a front-end loader under impact loads. Methods: Impact and static tests were conducted on a commonly used front-end loader mounted on a tractor. In the impact test, the bucket of the front-end loader with maximum live load was raised to its maximum lift height and was allowed to free fall to a height of 500 mm above the ground where it was stopped abruptly. For the static test, the bucket with maximum live load was raised and held at the maximum lift height, median height, and a height of 500 mm from the ground. Strain gages were attached at twenty-three main locations on the front-end loader, and the maximum stresses and strains were measured during respective impact and static tests. Results: Stresses and strains at the same location on the loader were higher in the impact test than in the static test, for most of measurement locations. This indicated that the front-end loader was put under a severe environment during impact loading. The safety factors for stresses were higher than 1.0 at all locations during impact and static tests. Conclusions: Since the lowest safety factor was higher than 1.0, the front-end loader was considered as structurally safe under impact loads. However, caution must be exercised at the locations having relatively low safety factors because failure may occur at these locations under high impact loads. These important design locations were identified to be the bucket link elements and the connection elements between the tractor frame and front-end loader. A robust design is required for these elements because of their high failure probability caused by excessive impact stress.

• Journal of Welding and Joining
• /
• v.14 no.3
• /
• pp.48-57
• /
• 1996

A study was made to examine the characteristics of base metal and stress relief cracking(SRC) of heat affected zone(HAZ) for HY-100 and Cu-bearing HSLA-100 steels. The Gleeble thermal/mechanical simulator was used to simulate the SRC/HAZ. The details of mechanical properties of base plate and SRC tested specimens were studied by impact test, optical microscopy and scanning electron microscopy. The specimens were aged at $650^{\circ}C$ for HSLA-100 steel and at $660^{\circ}C$ for HY-100 steel and thermal cycled from $1350^{\circ}C$ to $25^{\circ}C$ with a cooling time of $\Delta$t_${800^{circ}C/500^{circ}C}$=21sec. corresponds to the heat input of 30kJ/cm. The thermal cycled specimens were stressed to a predetermined level of 248~600MPa and then reheated to the stress relief temperatures of $570~620^{\circ}C$. The time to failure$(t_f)$ at a given stress level was used as a measure of SRC susceptibility. The strength, elongation and impact toughness of base plate were greater in HSLA-100 steel than in HY-100 steel. The time to failure was decreased with increasing temperature and/or stress. HSLA-100 steel was more susceptible to stress relief cracking than HY-100 steel under same conditions. It is thought to be resulted from the precipitation of $\varepsilon$-Cu phase by dynamic self diffusion of solute atoms. By the precipitation of $\varepsilon$-Cu phase, the differential strengthening of grain interior relative to grain boundary may be greater in the Cu-bearing HSLA-100 steel than in HY-100 steel. Therefore, greater strain concentration at grain boundary of HSLA-100 steel results in the increased SRC susceptibility. The activation energies for SRC of HSLA-100 steel are 103.9kcal/mal for 387MPa and 87.6kcal/mol for 437MPa and that of HY-100 steel is 129.2kcal/mol for 437MPa.

• Korean Journal of Veterinary Research
• /
• v.39 no.4
• /
• pp.738-742
• /
• 1999

The objective of this experiment was to investigate the effect of Newcastle disease virus (NDV) and infectious bursal disease virus (IBDV) vaccination on performance of broiler chicks for five weeks. Two types of poultry houses and three patterns of vaccination ($NDV^-/IBDV^-$, $NDV^+/IBDV^-$ and $NDV^+/IBDV^+$) were factorially assigned to six treatments. NDV, B1 strain and IBDV, Bursin-2 vaccine were orally administered at 5, 14 and 7, 18 days, respectively. Forty eight hundred chicks were grouped into four replications with two hundnyd hybro $\times$ hybro chicks per each treatment. Weight gain, feed conversion ratio (FCR), mortality and product index were surveyed at the end of experiment. Bursa index and IBDV antibody titer of chicks were weekly measured. Weight gain of chicks vaccinated with $NDV^+/IBDV^+$ was significantly increased compared to that of other treatments at both window and windowless poultry houses (p<0.05). Chicks vaccinated with $NDV^+/IBDV^+$ also showed significantly improving the FCR and mortality compared to those of other treatments at both poultry houses (p<0.05). The bursa indecies of both poultry houses were high from one-day- to three-weeks-old, but were low for the rest of two weeks. IBDV antibody of all chicks was detected 100% by agar gel precipitation (AGP) test at one day old, but was not detected in $NDV^-/IBDV^-$ and $NDV^+/IBDV^-$ treatments at four weeks old. However, it showed 100% in $NDV^+/IBDV^+$ treatment. Antibody titer using ELISA showed similar trend to that of AGP test. The results of this experiment confirmed that IBDV and NDV combined vaccine significantly improved the performance of broiler chicks.