• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.132-138
• /
• 2016

The objectives of this study were to infer the parameters of forest stand growth functions of STEMS for Cryptomeria japonica stands of Jeju Hannam Experimental Forest, Korea Forest Research Institute, and to investigate the effects of thinning regimes on the patterns of stand growth and carbon absorption. The forest stand growth functions for the potential diameter growth, modifier, crown ratio and mortality are the major ones composing the independent-tree/distance-free forest stand growth simulator, STEMS. The parameters were inferred using the sets of growth data obtained from stem analyses of 39 trees, chosen from 13 sample plots of the forest stands. The effects of thinning regimes on the patterns of stand growth and carbon absorption were investigated by simulating the stand growth patterns of the case study stand with 3 different thinning regimes: no-thinning, early thinning with low intensity and late thinning with high intensity using the simulator. According to the results of the analyses, the different thinning regimes cause significant effects on the growth patterns of average DBH, average height, diameter distribution and stand volume as well as the amount of carbon absorptions.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.22-28
• /
• 2014

This study was conducted to investigate the photosynthetic characters of Populus alba${\times}$glandulosa cuttings in response to elevated $CO_2$ concentration and air temperature for selecting tree species adaptive to climate change. The cuttings were grown in environment controlled growth chambers with two combinations of $CO_2$ concentration and air temperature conditions: (i) $22^{\circ}C$ + $CO_2$ 380 ${\mu}mol$ $mol^{-1}$ (control) and (ii) $27^{\circ}C$ + $CO_2$ 770 ${\mu}mol$ $mol^{-1}$ (elevated) for almost three months. The cuttings under the elevated treatment showed reduced tree height and photosynthetic pigment contents such as chlorophyll and carotenoid. In particular, the elevated treatment resulted in a marked reduction in the chlorophyll a closely associated with $CO_2$ fixative reaction system. Different levels of reduction in photosynthetic characters were found under the elevated treatment. A decrease was noted in photochemical reaction system parameters: net apparent quantum yield (7%) and photosynthetic electron transport rate (14%). Moreover, a significant reduction was obvious in $CO_2$ fixative reaction system parameters: carboxylation efficiency (52%) and ribulose-1,5-bisphosphate(RuBP) regeneration rate (24%). These results suggest that the low level of photosynthetic capacity may be attributed to the decreased $CO_2$ fixative reaction system rather than photochemical reaction system.

• The Korean Journal of Applied Statistics
• /
• v.30 no.1
• /
• pp.41-55
• /
• 2017

This study predicts the average scores of top 150 PGA golf players on 132 PGA Tour tournaments (2013-2015) using data mining techniques and statistical analysis. This study also aims to predict the Top 10 and Top 25 best players in 4 different playoffs. Linear and nonlinear regression methods were used to predict average scores. Stepwise regression, all best subset, LASSO, ridge regression and principal component regression were used for the linear regression method. Tree, bagging, gradient boosting, neural network, random forests and KNN were used for nonlinear regression method. We found that the average score increases as fairway firmness or green height or average maximum wind speed increases. We also found that the average score decreases as the number of one-putts or scrambling variable or longest driving distance increases. All 11 different models have low prediction error when predicting the average scores of PGA Tournaments in 2015 which is not included in the training set. However, the performances of Bagging and Random Forest models are the best among all models and these two models have the highest prediction accuracy when predicting the Top 10 and Top 25 best players in 4 different playoffs.

• Journal of Korean Society of Forest Science
• /
• v.16 no.1
• /
• pp.33-62
• /
• 1972

Pitch pine (Pinus rigida Miller) in Korea has become one of the major silvicultural species for many years since it was introduced from the United States of America in 1907. To attain the more rational wood utilization basical researches on wood properties are primarily needed, since large scale of timber production from Pitch Pine trees has now been accomplishing in the forested areast hroughout the country. Under the circumustances, this experiment was carried out to study the wood anatomical, physical and mechanical properties of Pitch Pine grown in the country. Materials used in this study had been prepared by cutting the selected pitch pine trees from the Seoul National University Forests located in Suwon. To obtain and compare the anatomical and physical properties of the different parts of tree such as stem, branch, top and rootwood, this study had been divided into two categories (anatomical and physical). For the anatomical study macroscopical and microscopical features such as annual ring, intercellular cannal, ray, tracheid, ray trachid, ray parenchyma cell and pit etc. were observed and measured by the different parts (stem, branch, root and topwood) of tree. For the physical and mechanical properties the moisture content of geen wood, wood specific gravity, shrinkage, compression parallel to the grain, tension parallel and perpendicular to the grain, radial and tangential shear, bending, cleavage and hardness wree tested. According to the results this study may be concluded as follows: 1. The most important comparable features in general properties of wood among the different parts of tree were distinctness and width of annual ring, transition from spring to summerwood, wood color, odor and grain etc. In microscopical features the sizes of structural elements of wood were comparable features among the parts of tree. Among their features, length, width and thickness of tracheids, resin ducts and ray structures were most important. 2. In microscopical features among the different parts of tree stem and topwood were shown simillar reults in tissues. However in rootwood compared with other parts on the tangential surface distinctly larger ray structures were observed and measured. The maximum size of unseriate ray was attained to 27 cell ($550{\mu}$) height in length and 35 microns in width. Fusiform rays were formed occasionally the connected ray which contain one or several horizontal cannals. Branchwood was shown the same features like stemwood but the measured values were very low in comparing with other parts of tree. 3. Trachid length measured among the different parts of tree were shown largest in stem and shortest in branchwood. In comparing the tracheid length among the parts the differences were not shown only between stem and rootwood, but shown between all other parts of tree. Trachid diameters were shown widest in rootwood and narrowest in branchwood, and the differences among the different parts were not realized. Wall thickness were shown largest value in rootwood and smallest in branchwood, and the differences were shown between root and top or branchwood, and between stem and branch or top wood, but not shown between other parts of tree. 4. Moisture contents of green wood were shown highest in topwood and lowest in heartwood of stem. The differences among the different parts were recognized between top or heartwood and other parts of tree, but not between root and branchwood or root and sapwood. 5. Wood specific gravities were shown highest in stem and next order root and branchwood, but lowest in topwood. The differences were shown clearly between stemwood and other parts of tree, but not root and branchwood. However the significant difference is realized as most lowest value in topwood. 6. In compression strength parallel to the grain compared among the different parts of tree at the 14 percent of moisture content, highest strength was appeared in stem, next order branch and rootwood, but lowest in topwood. 7. In bending strength compared among the different parts of tree at the 14 percent of moisture content clearly highest strength was shown in branchwood, next order stem and root, but lowest in topwood. Though the branchwood has lower specific gravity than stemwood it was shown clearly high bending strength.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.210-216
• /
• 2021

Musculoskeletal disorders affect workers' safety in most industries, and forest operations are classified as a musculoskeletal burden according to the Occupational Safety and Health Act in South Korea. In particular, felling and delimbing operations are mainly conducted by manpower, and then, it is necessary to evaluate ergonomic risk assessment for safety of felling and delimbing workers. Three ergonomic risk assessment methods, such as Ovako Working posture Analysis System (OWAS), Rapid Upper Limb Assessment (RULA), and Rapid Entire Body Assessment (REBA), are available for assessing exposure to risk factors associated with timber harvesting operations. Here, three ergonomic risk assessment methods were applied to examine ergonomic risk assessments in chainsaw felling and delimbing operations. Additionally, exposure to risk factors in each method was analyzed to propose an optimal working posture in felling and delimbing operations. The risk levels of these operations were evaluated to be highest in the RULA method, followed by the OWAS and REBA methods, and most of the exposed working postures were examined with a low-risk level of two and three without requiring any immediate working posture changes. However, two significant working postures, including the bending posture of the waist and leg in felling operation and standing posture on the fallen trees in delimbing operation, were assessed as the high-risk level and needed immediate working posture changes. Low-risk work levels were examined in the squatting posture for felling operation and the straightened posture of the waist and leg for delimbing operation. Moreover, the slope in felling operation and the tree height in delimbing operation significantly affected risk level assessment of working posture. Therefore, our study supports that felling and delimbing workers must operate with low-risk working postures for safety.

• Korean Journal of Environment and Ecology
• /
• v.28 no.1
• /
• pp.62-70
• /
• 2014

This study was carried out to analysis the vegetation status, the habitat size and the meaning of new natural habitat, and to provide basic data for conservation or management on the newly augmented natural habitat of Abeliophyllum distichum Nakai in Yeoju-si, Gyunggi-do, Korea. A. distichum is a Korean monotypic endemic species. Most natural habitats of A. distichum have been reported in South-Central area around Chungcheong-do. The extent of occurrence of A. distichum can be enlarged to Central area due to the Yeoju-si habitat. The new habitat is located on a hillock which is composed of rock field at $37^{\circ}20{\sim}21^{\prime}N$, $137^{\circ}43{\sim}21^{\prime}E$, and 99~120m a.s.l.. The habitat size is small as about $530m^2$, and a small stream runs aside. The number of individuals of A. distichum was about 1,200. But most individuals were smaller than 0.5m height, so just about 300 individuals are taller than 1.0m height. A. distichum on Yeoju-si seemed to be maintained and distributed by vegetative propagation from elongated roots of branches. Pinus rigida and Quercus aliena dominated tree layer, and Lindera obtusiloba, Q. aliena and Acer tatricum appeared frequently in subtree layer. The shrub layer was dominated by A. distichum with Stephanandra incisa, Euonymus alatus for. ciliatodentatus, Ligustrum obtusifolium, etc. The coverage of herbaceous layer was low.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.524-531
• /
• 1996

The objective of this study was to determine the important factors affecting the early natural regeneration of Pinus densiflora S. et Z. Seed germination, survival and height growth of the pine seedlings were examined at four experimental plots of P. densiflora forests including forest roadside. Plots I and III were thinned in 1992, plot II was treated with hexazinone in 1993 after seed tree method was applied in 1982 and 1989. Seedlings emerged after thinning and the rate of their emergence depended on forest floor conditions. Seedling survival was related with light conditions, herbaceous vegetation, and degrees of rainfall. More seedlings emerged in forest hauling roads than within the forest because soil scarification due to logging provided better conditions for seed germination and seedling growth. Seed supply was enough, but germination rate was very low in the forest compared with that in the greenhouse because micro-environments such as organic layer and herbaceous plant acted as limiting factors. Weed control was needed for 4 to 5 years until seedlings grew upto about 50cm in height which was similar to that of herbaceous plants. But 10-40% coverage of herbaceous vegetation was needed to protect small seedlings from heavy rain. Forest works such as thinning and logging, over 40% of light were important factors to help the pine regeneration. However, over 70% coverage of herbaceous vegetation, and heavy rain inhibited rather survival and growth of pine seedlings.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.73-81
• /
• 2015

The objective of this study is in investigating the research for more accurately quantify the information on mountain forest by using the data on high density LiDAR. For the quantitative analysis of mountain forest resources, we investigated the method to acquire the data on high density LiDAR and extract mountain forest resources. Consequently, the height and girth of a tree each mountain forest resources could be extracted by using the data on high density LiDAR. When using the data on low density LiDAR of 2.5points/m² in average used to produce digital map, it was difficult to extract the exact height and girth of mountain forest resources. If using the data on high density LiDAR of 7points/m² by considering topography, the property of mountain forest resources, data capacity and process velocity, etc, it was found that multitudinous entities could be extracted. It was found that mountain topography and mixed topography were generally denser than plane topography and multitudinous mountain forest resources could be extracted. Furthermore, it was also found that the entity at the border could not be extracted, when each partition was individually processed and the area should be subdivided and extracted by considering the process time and property of target area rather than processing wide area at once. We expect to be studied more profoundly the absorption quantity of greenhouse gas later by using information on mountain forest resources in the future.

• Journal of Korean Society of Forest Science
• /
• v.39 no.1
• /
• pp.64-68
• /
• 1978

Thirty nine clones of ${\times}$Populus alba glandulosa were selected tentatively and planted in Hwasung in Kyunggi-do, Jinju in Kyungnam-do, Myongju in Kangweon-do. Height measurements after tree growing seasons, indicated significant differences between clones and locations. Interaction between clones and locations were not significant statistically. Among 39 clones, 65-29-19, 65-11-106, 67-47-10, 66-14-149, 64-6-44 were best performing clones. Height measurements in Hwasung Kyunggi, and Jinju Kyungnam were 3.83m, 4.02m respectively, while that in Myongju Kangweon was only 1.06m. Myongju plantation in Kangweon-do is located in altitude of 800m and its average annual temperature was $6.2^{\circ}C$. Retarded growth in this plantation is caused high altitude and low temperature of the plantation which resulted from nearly three monthes shorter growing period than two other plantations. It is also recommended that straightness of stem, branching, wood quality and insect and disease-resistance have to be considered as selection criteria along with growth performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.5
• /
• pp.318-323
• /
• 2008

We studied on the effects of slurry composting and biofiltration liquid fertilizer (SCBLF) on growth of two-year-old poplar clones planted in a reclaimed land mounding soil. The soil on the experimental site had lower concentrations of both exchangeable cations and salinity than before reclamation. However, the content of organic matter was low compared with the most soils. We applied SCBLF to the poplars six times and 5 L in each time for 80 days. Ten clones of six poplar species or hybrids were tested in this study: Populus alba ${\times}$ P. glandulosa(Clivus, 72-30, 72-31, Bongwha1), P. deltoides ${\times}$ P. nigra(Dorskamp), P. deltoides(Lux) ${\times}$ P. deltoides(Harvard)(97-19), P. euramericana(Eco28, I-476), P. nigra ${\times}$ P. maximowiczii(62-2) and P. Koreana ${\times}$ P. nigra var. italica(Suwon). Growth performance varied more among clones than among species. Average height growth of treated plots was 18% greater than control, and clones Clivus, 97-19, Eco28 and Dorskamp were more vigorous than other clones. Diameter at breast height in treated plots was 41% greater than control, and 97-19, Dorskamp, Eco28 and Clivus were the four best clones in this respect. Mean leaf area of treated trees was 26% greater for control trees. Chlorophyll content was similar between treated and controlled trees. Total nitrogen values in leaves were much higher in treated trees 18%. SCBLF treatment on poplars planted in reclaimed land helped tree growth.