• Journal of ILASS-Korea
• /
• v.16 no.4
• /
• pp.167-175
• /
• 2011

The HCCI engines have been known with high efficiency and low pollution and can be actualized as the new internal combustion engines. However, As for(??) the ignition and combustion depend strongly on the oxidation reaction of the fuel, so it is difficult to control auto-ignition timing and combustion duration. Purpose of this paper is creating the database for development of multi-dimensional simulation and investigating the influence of different molecular structure. In this research, the effect of n-heptane mole ratio in fuel (XnH) on the ignition delay from homogeneous charge compression ignition(HCCI) has been investigated experimentally. By varying the XnH, it was possible to ascertain whether or not XnH is the main resource of ignition delay. Additionally, the information on equivalence ratio for varying XnH was obtained. The tests were performed on a RCM (Rapid Compression Machine) fueled with n-heptane and iso-octane. The results showed that decreasing XnH (100, 30, 20, 10,0), the ignition delays of low temperature reaction (tL) and high temperature reaction (tH) is longer. And the temperature of reaction increases by about 30K. n-heptane partial equivalence ratio (fnH) affect on tL.and TL. When ${\phi}$nH was increased as a certain value, tL was decreased and TL was increased.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.102-106
• /
• 2008

A new compact UWB bandpass filter with sharp-rejection, low insertion-loss and flat group-delay is developed In this paper, using the transversal filtering combined with SIR(stepped impedance resonator) concept. To form the required passband, multiple out-of-band transmission zeros are created around band-edges, securing very low insertion loss in the very wide frequency range. Also it is found to be beneficial to realize a sharp rejection of higher order with a relatively small overall size and simultaneously have very smoothly varying group-delay which is proper for the UWB applications. The validity of the proposed technique is proven theoretically and experimentally.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.1-8
• /
• 1998

In this paper, we designed a low power 8bit ELM adder with static CMOS and hybrid logic styles on a chip. The designed 8bit ELM adder with both logic styles was fabricated in a 0.8$\mu\textrm{m}$ single-poly double-metal, LG CMOS process and tested. Hybrid logic style consists of CCPL(Combinative Complementary Pass-transistor Logic), Wang's XOR gate and static CMOS for critical path which determines the speed of ELM adder. As a result of chip test, the ELM adder with hybrid logic style is superior to the one with static CMOS by 9.29% in power consumption, 14.9% in delay time and 22.8% in PDP(Power Delay Product) at 5.0V supply voltage, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.264-269
• /
• 2006

A $0.12GHz{\sim}1.4GHz$ DLL-based clock generator with the capability of multiplied four phase clock generation was designed using a 0.18um CMOS process. An adaptive bandwidth DLL with a regulated supply delay line was used for a multiphase clock generation and a low jitter. An extra phase detector (PD) in a reference DLL solves the problem of the initial VCDL delay and achieves a fast lock time. Twice multiplied four phase clocks were generated at the outputs of four edge combiners, where the timing alignment was achieved using a coarse lock signal and the 10 multiphase clocks with T/8 time difference. Those four clocks were combined one more time using a static XOR circuit. Therefore the four times multiplication was achieved. With a 1.8V supply, the rms jitter of 2.1ps and the peak-to-peak jitter of 14.4ps were measured at 1.25GHz output. The operating range is $0.12GHz{\sim}1.4GHz$. It consumes 57mW and occupies 450*325um2 of die area.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2302-2322
• /
• 2012

Wireless Body Area Networks (WBANs) are introduced as an enabling technology in tele-health for patient monitoring. Designing an efficient Medium Access Control (MAC) protocol is the main challenge in WBANs because of their various applications and strict requirements such as low level of energy consumption, low transmission delay, the wide range of data rates and prioritizing emergency data. In this paper, we propose a new MAC protocol to provide different requirements of WBANs targeted for medical applications. The proposed MAC provides an efficient emergency response mechanism by considering the correlation between medical signals. It also reduces the power consumption of nodes by minimizing contention access, reducing the probability of the collision and using an efficient synchronization algorithm. In addition, the proposed MAC protocol increases the data rate of the nodes by allocating the resources according to the condition of the network. Analytical and simulation results show that the proposed MAC protocol outperforms IEEE 802.15.4 MAC protocol in terms of power consumption level as well as the average response delay. Also, the comparison results of the proposed MAC with IEEE 802.15.6 MAC protocol show a tradeoff between average response delay and medical data rate.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.143-146
• /
• 2004

Differentiated services (DiffServ) has been widely accepted as the service model to adopt for providing quality-of­service (QoS) over the next-generation IP networks. There is a growing need to support QoS in mobile ad hoc networks. Supporting DiffServ in mobile ad hoc networks, however, is very difficult because of the dynamic nature of mobile ad hoc networks, which causes network congestion. The network congestion induces long transfer packet delay and low throughput which make it very difficult to support QoS in mobile ad hoc networks. We propose DiffServ module to support differentiated service in mobile ad hoc networks through congestion control. Our DiffServ module uses the periodical rate control for real time traffic and also uses the best effort bandwidth concession when network congestion occurs. Network congestion is detected by measuring the packet transfer delay or bandwidth threshold of real time traffic. We evaluate our mechanism via a simulation study. Simulation results show our mechanism may offer a low and stable delay and a stable throughput for real time traffic in mobile ad hoc networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1721-1726
• /
• 2014

The sensor network technology for core technology of ubiquitous computing is in the spotlight recently, the research on sensor network is proceeding actively which is composed many different sensor node. The major traffic patterns of plenty of sensor networks are composed of collecting types of single directional data, which is transmitting packets from several sensor nodes to sink node. One of the important condition for design of sensor node is to extend for network life which is to minimize power-consumption under the limited resources of sensor network. In this paper analysis used routing protocols using the network simulation that was used second level cluster structure to reduce delay and power-consumption of sensor node.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.528-536
• /
• 2011

In this paper, we analyze the location accuracy of real-time locating systems (RTLSs) in multipath environments in which the RTLSs comply with the ISO/IEC 24730-2 international standard. To analyze the location error of RTLS in multipath environments, we consider a direct path and indirect path, in which time and phase are delayed, and also white Gaussian noise is added. The location error depends strongly on both the noise level and phase difference under a low signal-to-noise ratio (SNR) regime, but only on the noise level under a high SNR regime. The phase difference effect can be minimized by matching it to the time delay difference at a ratio of 180 degrees per 1 chip time delay (Tc). At a relatively high SNR of 10 dB, a location error of less than 3 m is expected at any phase and time delay value of an indirect signal. At a low SNR regime, the location error range increases to 8.1 m at a 0.5 Tc, and to 7.3 m at a 1.5 Tc. However, if the correlation energy is accumulated for an 8-bit period, the location error can be reduced to 3.9 m and 2.5 m, respectively.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.3
• /
• pp.19-30
• /
• 2007

In this paper, we propose low-complexity implementation of orthogonal frequency division multiple access (OFDMA) timing delay detector with multiple receive antennas for broadband wireless access (BWA). First, in order to reduce the computational complexity, the detection structure which rotates the phase of the received ranging symbols is introduced. Second, we propose the detection structure with the N-point/M-interval fast Fourier transform structure and a frequency-domain average-power estimator for complexity reduction without sacrificing the system performance. Finally, simulation results for the proposed structures and complexity comparison of the existing structure with the proposed detectors are presented.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2124-2126
• /
• 2008

In the wireless communication systems, the demand of multimedia services is also increased. Unlike typical data packets, realtime service such as VoIP packets have delay bound and low loss rate requirement. In this paper we propose a new scheduling algorithm that be able to allocate resources to the different kinds of services such as VoIP and data packet. The proposed algorithm considers both time delay and channel condition toe determine the priority. Simulation results show that the proposed algorithm works more efficiently than the conventional algorithms.