• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.67-72
• /
• 2019

This study compared the theory of a culvert spacing and analytical results of the seepage flow for the subsurface drainage. i) If culvert spacing (Sc) is within 5 m, the unit drainage (q) is very larger; in contrast, if Sc is 5 m or more, there is very little drainage in the middle between drains. Therefore, the drain spacing should be within 5 m to ensure high drainage efficiency. ii) Since the planned culvert drainage increases linearly with the soil's permeability coefficient (k), k must be taken into account when determining the drain diameter by the planned culvert drainage. iii) As a result of analyzing the drainage performance of the absorbing culvert, the drainage performance is sufficient with the diameter of the corrugated drain pipe Dc = 50 mm at the length of the drain Lc = 100 m. iv) Therefore, if the drain spacing (Sc) is less than 5 m using the low-cost non-excavated drainage pipe method (${\Phi}50mm$ the corrugated drain pipe and fiber mat) rather than the conventional trench drain method (Sc > 10 m, Dc > 100 mm), uniform and high drainage efficiency can be ensured as well as low construction cost. v) The sub-irrigation+drainage culvert requires narrower drain spacing (Sc < 2-3 m) for irrigation. As a result of examining the condition of 35 mm in diameter (Dc) and 2~3 m in drain spacing, it is possible to apply the non-excavated drainage pipe method to the sub-irrigation+drainage culvert because drainage performance is sufficient at the drain length Lc = 50 m.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.670-679
• /
• 2012

The recent dissemination of cloud computing makes the amount of data storage to be increased and the cost of storing the data grow rapidly. Accordingly, data and service requests from users also increases the load on the cloud storage. There have been many works that tries to provide low-cost and high-performance schemes on distributed file systems. However, most of them have some weaknesses on performing parallel and random data accesses as well as data accesses of frequent small workloads. Recently, improving the performance of distributed file system based on caching technology is getting much attention. In this paper, we propose a CHPC(Cloud storage High-Performance Caching) framework, providing parallel caching, distributed caching, and proxy caching in distributed file systems. This study compares the proposed framework with existing cloud systems in regard to the reduction of the server's disk I/O, prevention of the server-side bottleneck, deduplication of the page caches in each client, and improvement of overall IOPS. As a results, we show some optimization possibilities on the cloud storage systems based on some evaluations and comparisons with other conventional methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.509-516
• /
• 2004

High-performance Si integrated passive process was developed using thick oxidation process and Cu-BCB process. This passive process leads to low-cost and high-quality RF module with a small form factor. The fabricated spiral inductor with 225 um inner diameter and 2.5 turns showed the inductance of 2.7 nH and the quality factor more than 30 in the frequency region of 1 ㎓ and above. Also WLCSP-type integrated passive devices were fabricated using the high-performance spiral inductors. The fabricated low pass filter had a parallel-resonance circuit inside the spiral inductor to suppress 2nd harmonics and showed about 0.5 ㏈ insertion loss at 2.45 ㎓. And also the high/low-pass balun had the insertion loss less than 0.5 ㏈ and the phase difference of 182 degrees at 2.45 ㎓.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.1
• /
• pp.61-69
• /
• 2001

A total of 120 pigs were used to investigate the effects of yucca extracts on the growth performance, nutrient digestibility and excretion of growing pigs fed different levels of dietary protein. Pigs were allotted into $2{\times}3$ factorial design by the supplementation with yucca extract (YE, 0 and 120 mg/kg) and 3 levels of dietary protein (16, 18, 20%). During the whole experimental period (18 to 52 kg body weight), there were no significant differences in ADG, ADFI or F/G by YE addition or different protein levels among treatments (p>0.05). Overall, although addition of YE to the diet and elevation of protein level showed better ADG, there were no significant differences in growth performance among treatments. Pigs fed diets with YE showed significantly (p<0.05) higher dry matter (DM), crude ash (CA) and crude protein (CP) digestibility than did the others during the growing period. Concerning the levels of dietary protein, only the CP digestibility was significantly higher in pigs fed high protein diet. Pig fed the low protein diet without YE showed a significantly low CP digestibility (p<0.05). No significant differences were found in crude fat (CF), calcium (Ca) and phosphorus (P) digestibilities regardless of YE supplementation or dietary protein levels. Pigs fed YE supplemented diets showed significantly (p<0.05) higher amino acid digestibility. Also, high CP level diets showed a higher amino acid digestibility than low CP diets (p<0.05). DM and N excretion did not show any significant differences among treatments, there was a slightly lower excretion with increase in dietary protein level. Supplementation with YE significantly decreased the DM and N excretion. Interaction (YE$\times$protein) was found in P excretion. Pigs fed a medium protein diet without YE showed the lowest P excretion during the growing period. The NH3-N content in the feces tended to be increased by the increased dietary protein levels and with YE supplementation. During the whole experimental period, the cost for YE supplementation was similar to value of the improvements of performance obtained. The cost of feeding high level protein was significantly higher than that of medium level protein by 10% and low level protein by 9% (p<0.05). It could be concluded that the effects of dietary protein level and yucca extract on growth performance, nutrient digestibility and excretion might play a role to some extent in growing pigs from the aspect of pollution control.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.342-350
• /
• 1999

Two location algorithm (TLA) considers two location areas (LAs) to track the location of a mobile station (MS). The TLA significantly outperforms the single location algorithm when the call-to-mobility ratio (CMR) is low (i.e., the user moves more frequently than to receive calls). However, because of the paging cost for the users moving back to the previously visited LA, the performance of the TLA degrades when the CMR is high. To reduce those paging cost, we propose the new algorithm called TLA with call information (TLAC). In TLAC, we use the location information of the MS within the setup message when the MS originates a call in the previously visited LA. Through the setup message, the system can know the exact location of the MS without the additional location registration operation, and the paging cost for the arriving calls in the visited LA can be reduced. An analytical model is proposed to compare the TLAC and previous TLA protocol. Our study indicates that the TLAC always guarantees better performance than the TLA. We also observe that the TLAC is much better than the TLA when the CMR is high.

• Korean Journal of Materials Research
• /
• v.32 no.5
• /
• pp.237-242
• /
• 2022

Designing and producing a low-cost, high-current-density electrode with good electrocatalytic activity for the oxygen evolution reaction (OER) is still a major challenge for the industrial hydrogen energy economy. In this study, nanostructured Fe-doped CuCo(OH)₂ was discovered to be a precedent electrocatalyst for OER with low overpotential, low Tafel slope, good durability, and high electrochemically active surface sites at reduced mass loadings. Fe-doped CuCo(OH)₂ nanosheets are made using a hydrothermal synthesis process. These nanosheets are clumped together to form a highly open hierarchical structure. When used as an electrocatalyst, the Fe-doped CuCo(OH)₂ nanosheets required an overpotential of 260 mV to reach a current density of 50 mA cm^-2. Also, it showed a small Tafel slope of 72.9 mV dec^-1, and superior stability while catalyzing the generation of O₂ continuously for 20 hours. The Fe-doped CuCo(OH)₂ was found to have a large number of active sites which provide hierarchical and stable transfer routes for both electrolyte ions and electrons, resulting in exceptional OER performance.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1744-1759
• /
• 2007

This study intended to identify the problems of the railroad which are raised as one of the 21C next-generation but to define the direction for the absence of the national policy and examine the competitiveness of railway transportation which is a Green Network with low environmental destruction and high energy efficiency as the continuable means of transportation for the 21st century with superiority to energy crisis caused by high oil price, conclusion of the Kyoto Protocol for worsened air pollution, and reduced cost of traffic jam.

• Korean Journal of Materials Research
• /
• v.31 no.5
• /
• pp.272-277
• /
• 2021

Owing to its low cost, easy fabrication process, and good ionic properties, aqueous supercapacitors are under strong consideration as next-generation energy storage devices. However, the limitation of the current collector is its poor electrochemical stability, leading to low energy storage performance. Therefore, a reasonable design of the current collector and the acidic electrolyte is a necessary, as well as interfacial engineering to enhance the electrochemical performance. In the present study, graphite foil, with excellent electrochemical stability and good electrical properties, is suggested as a current collector of aqueous supercapacitors. This strategy results in excellent electrochemical performance, including a high specific capacitance of 215 F g^-1 at a current density of 0.1 A g^-1, a superior high-rate performance (104 F g^-1 at a current density of 20.0 A g^-1), and a remarkable cycling stability of 98 % at a current density of 10.0 A g^-1 after 9,000 cycles. The superior energy storage performance is mainly ascribed to the improved ionic diffusion ability during cycling.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.79-80
• /
• 2007

A high performance organic phototransistor with dynamic range of 120 dB is demonstrated by employing soluble pentacene as a photo-sensing layer. The organic phototransistor used suspended source/drain (SSD) electrode structure, which provides a dark current level of ${\sim}10^{-14}$ A at positive gate bias. Under a steady-state illumination, the organic phototransistor exhibited a current modulation of $10^6$ compared to dark to give a dynamic range of 120 dB. These results suggest that the organic phototransistor based on TIPS pentacene can be a new premising candidate for low-cost and high-performance photo-sensing element for digital imaging applications.

• Advances in aircraft and spacecraft science
• /
• v.4 no.5
• /
• pp.543-553
• /
• 2017

Vibration is a source of performance degradation in all optical imaging systems. Performance of high resolution remote sensing payloads is often limited due to satellite platform vibrations. Effects of Linear and high frequency sinusoidal vibrations on the system MTF are known exactly in closed form but the low frequency vibration effects is a random process and must be considered statistically. Usually the vibration MTF budget is defined based on the mission requirements and the overall MTF limitations. For analyzing low frequency effects, designer must know all the systems specifications and parameters. With a good understanding of harmful vibration frequencies and amplitudes in the system preliminary design phase, their effects could be removed totally or partially. This procedure is cost effective and let the designer to eliminate just harmful vibrations and avoids over-designing. In this paper we have analyzed the effects of low-frequency platform vibrations on the payload's modulation transfer function. We have used a statistical analysis to find the probability of imaging with a MTF equal or greater than a pre-defined budget for different missions. The worst and average cases have been discussed and finally we have proposed "look-up figures". Using these look-up figures, designer can choose the electro-optical parameters in such a way that vibration effects be less than its pre-defined budget. Furthermore, using the results, we can propose a damping profile based on which vibration frequencies and amplitudes must be eliminated to stabilize the payload system.