• 제목/요약/키워드: Low Vibration

검색결과 2,166건 처리시간 0.029초

Nonlinear Characteristics of Low-speed Flow Induced Vibration for the Safety Design of Micro Air Vehicle

  • 장태진;김동현;이인
    • 한국소음진동공학회논문집
    • /
    • 제12권11호
    • /
    • pp.873-881
    • /
    • 2002
  • The fluid induced vibration (FIV) phenomena of an equivalent airfoil system of MAV have been investigated in low Reynolds number flow region. Unsteady flows with viscosity are computed using two-dimensional incompressible Navier-Stokes equations. The present fluid/structure interaction analysis is based on one of the most accurate computational approach with computational fluid dynamics (CFD) and computational structural dynamics (CSD) techniques. The highly nonlinear fluid/structure interaction phenomena due to severe flow separations have been analyzed for the low Reynolds region that has a dominancy of flow viscosity. The effects of Reynolds number and initial angle of attack on the fluid/structure coupled vibration instability are shown and the qualitative trend of FIV phenomenon is investigated.

무진동 굴착구간에서의 시공성 향상을 위한 미진동 전자발파공법 평가 (Evaluation of low-vibration electronic detonator blasting method to improve constructability in non-vibration excavation section)

  • 정승원;송진혁;황남순;김현기;김남수;이종우
    • 한국터널지하공간학회 논문집
    • /
    • 제25권2호
    • /
    • pp.157-173
    • /
    • 2023
  • 본 현장은 265 m 구간이 무진동 굴착공법으로 설계되어 있지만 시공성과 경제성의 저하가 우려된다. 이러한 이유로 미진동 전자발파공법이 제안되었다. 미진동 전자발파의 적용성 평가를 위해서 본 현장 직전 적용하였던 미진동 전자발파(제안 I)와 본 현장과 같이 지하철 근거리에서 시공된 미진동 전자발파(제안 II)의 발파진동 영향범위를 분석하였다. 두 제안의 발파진동 영향범위 비교결과, 제안 II의 영향범위가 더 보수적으로 산출되었다. 본 현장의 근거리라는 특수성을 고려할 때, 보다 안전한 시공을 위해 설계변경에 제안 II를 선정하였다. 결과적으로 무진동 굴착구간 265 m 구간 중 72 m 구간에 대하여 미진동 전자발파공법으로 변경하여도 구조물에 미치는 영향이 없을 것으로 예측된다. 그리고 총 예상 굴진 소요 기간 662.5일에서 144일 단축할 수 있기 때문에 높은 경제적 이익을 얻을 수 있다고 평가된다.

Condition Monitoring of Low Speed Slewing Bearings Based on Ensemble Empirical Mode Decomposition Method

  • Caesarendra, W.;Park, J.H.;Choi, B.H.;Kosasih, P.B.
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2012년도 추계학술대회 논문집
    • /
    • pp.388-393
    • /
    • 2012
  • Vibration condition monitoring at low rotational speeds is still a challenge. Acoustic emission (AE) is the most used technique when dealing with low speed bearings. At low rotational speeds, the energy induced from surface contact between raceway and rolling elements is very weak and sometimes buried by interference frequencies. This kind of issue is difficult to solve using vibration monitoring. Therefore some researchers utilize artificial damage on inner race or outer race to simplify the case. This paper presents vibration signal analysis of low speed slewing bearings running at a low rotational speed of 15 rpm. The natural damage data from industrial practice is used. The fault frequencies of bearings are difficult to identify using a power spectrum. Therefore the relatively improved method of empirical mode decomposition (EMD), ensemble EMD (EEMD) is employed. The result is can detect the fault frequencies when the FFT fail to do it.

  • PDF

아파트 구조물의 진동특성 평가에 관한 연구 (Evaluation on Vibration Characteristics of an Apartment Building Structure)

  • 최창식;이리형
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제2권3호
    • /
    • pp.161-167
    • /
    • 1998
  • A problem of frequency in the field of low-frequencies such as high-rise apartment building or construction vibration are often found. In this study, damage reason of a 25 stories apartment building was searched on the basis of actual damage. To find the damage reason, structural design procedure were reviewed and low-frequency vibration test was conducted. The results indicate that the main damage reason is not by the low-frequency vibration but the asymmetrical plan of that building.

  • PDF

저진동 차체의 필라 설계 및 최전화 기법 (Technology for Initial Design and Analysis of Vehicle Pillar Structures for Vibration)

  • 임홍재;이상범
    • 소음진동
    • /
    • 제5권3호
    • /
    • pp.395-402
    • /
    • 1995
  • In general low frequency vibration characteristics like an idleshake is mainly influeced by pillar section properties and joints. So the design technique development of vehicle pillar structures is required to initial design and vehicle development stage. In this paper to develop pillar structure design technique considering low frequency vibration characteristics, strain energy method, design sensitivity analysis method, and design optimization method using commercial finite element analysis program and optimization program are presented.

  • PDF

Hybrid Excitation Control of SRM Drive for Reduction of Vibration and Acoustic Noise

  • Lee, Dong-Hee;Lee, Sang-Hun;Ahn, Jin-Woo;Park, Sung-Jun
    • KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
    • /
    • 제11B권4호
    • /
    • pp.151-155
    • /
    • 2001
  • The simple motor construction and low cost, fault tolerant power electronic drive has made the switched reluctance drive a strong contender for many applications. But the switched reluctance drive does exhibit higher levels of vibration and acoustic noise than that of most competing drives. The main source of vibration in the switched reluctance drive is generated by rapid change of radial magnetic force when phase current is extinguished during commutation action. In this paper, a hybrid excitation method is proposed to reduce vibration and acoustic noise of the switched reluctance drive. The hybrid excitation has 2-phase excitation by long dwell angle as well as conventional 1-phase excitation. The vibration and acoustic noise are reduced because the scheme reduces abrupt change of excitation level by distributed and balanced excitation.

  • PDF

비틀림 진동 계산 및 측정을 통해 고찰한 선박용 2행정 저속엔진 Crankshaft 파단 현상 (Two Stroke Low Speed Diesel Engine Crankshaft Crack Phenomenon Study by Torsional Vibration Calculation & Measurement)

  • 문정하;김정렬
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 춘계학술대회 논문집
    • /
    • pp.110-118
    • /
    • 2014
  • In the past two stroke low speed diesel engine were widely used for marine propulsion. these engine have many merit for example, higher thermal efficiency and durability. however, shaft vibration problem was continuously rise up due to large power of two stroke low speed diesel engine. specially, the initial stage engine revolution counter & stress has acculated. For that reason, sometimes occurred crankshaft crack accident. In this study, regarding the initial stage engine, trying to analyze what is cause the crack phenomenon using by latest torsional vibration calculation program & measurement equipment.

  • PDF

영상 처리 방법을 이용한 구조물의 큰 변위 저주파 진동 계측 (Measurement of Large-amplitude and Low-frequency Vibrations of Structures Using the Image Processing Method)

  • 김기영;곽문규
    • 한국소음진동공학회논문집
    • /
    • 제15권3호
    • /
    • pp.329-333
    • /
    • 2005
  • This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we propose the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The current resolution of the vibration measurement is limited to sub centimeter scale. However, the frequency bandwidth and resolution can be enhanced by a high-speed and high-resolution image processing system.

플로팅궤도 연결부의 하중전달효율 산정을 위한 수치해석 (Numerical Study on Load Transfer Efficiency of Floating Slab Track)

  • 정원석;장훈;박성재;박명균
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.1287-1292
    • /
    • 2010
  • Recently, many railway stations are built under the railway line in urban area. The passage of railway vehicles generates mechanical vibrations of a wide range of frequency. Thus, it is required to place structural vibration isolation systems to reduce vibration and noise originating from surrounding environments. This study utilizes elastometric bearings as a vibration isolation system. The slab track system on elastometric bearings is called "low vibration track" or "floating slab track." In this low vibration track system, dowel bars or plates can be installed to minimize the discontinuity of displacement between adjacent floating slab tracks. This study is to numerically investigate the effects of dowel members on static behavior of the low vibration track. The study involves two steel dowel systems including dowel bars and dowel plates. Each dowel system is analyzed under the service load condition to assess load transfer efficiency (LTE).

  • PDF

무선 MEMS 센서를 이용한 저층건물 상시진동계측의 유효성 평가 (The Evaluation of Effectiveness on Horizontal Transient Vibration Measurement of Low-Rise Building Using Wireless MEMS Sensor)

  • 이종호;윤성원
    • 한국공간구조학회논문집
    • /
    • 제17권3호
    • /
    • pp.57-64
    • /
    • 2017
  • Recently, measuring instruments for SHM of structures had being developed. In general, the wireless transmission of sensor signals, compared to its wired counterpart, is preferable due to its absence of triboelectric noise and elimination of the requirement for cumbersome cable. Preliminary studies on the continuous vibration measurement of high-rise buildings using MEMS sensors have been carried out. However, the research on the low-rise buildings with relatively small vibration levels is insufficient. Therefore, in this paper, we used the wireless MEMS sensor to compare and analyze the vibration measurements of three low-rise buildings.