• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.574-580
• /
• 2019

In this paper, the economic performance of the Jeju Free International City and the Free Economic Zone is investigated using statistical testing and the difference in differences (DID) model with data on foreign direct investment (FDI), gross regional domestic product (GRDP), and employment-to-population ratio (EPR). The relationships among FDI, GRDP, and EPR are also investigated using the panel vector error-correction model on the regional data. The compound average growth rate of actual investment, and the ratio of FDI received to FDI declared in the capital region were higher than in the non-capital region. For the growth and relative volume of FDI received, seven regions out of 16 were found to be low in growth and small in relative volume. The results of statistical testing showed statistically significant differences in some variables, except for two regions, but DID estimates that determine the pure policy effect of zone designation showed statistical insignificance. On the other hand, the explanatory power among the three variables was found to be quite limited, but it was greater in the cities, provinces, and non-capital region. In summary, it is necessary to establish the FDI inducement mechanism so the inflow of FDI can increase GRDP and EPR.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.244-251
• /
• 2022

This study attempted to investigate the applicability of Geranium maculatum extract as a cosmeceutical ingredient. For this, DPPH, ABTS and FRAP assays were performed to assess radical scavenging activities. To evaluate antioxidant substances, in addition, polyphenol and flavonoid concentrations were measured. Furthermore, cytotoxicity, whitening and anti-inflammatory tests were conducted, using B16F10 and RAW 264.7 cells, and the results found the followings: In the DPPH and ABTS assays, 265.8 mg ascorbic acid/g and 168.5 mg ascorbic acid/g of antioxidant capacities were found respectively. According to the FRAP assay, 1 mg Geranium maculatum extract was same with ascorbic acid 229±9 ㎍ in terms of reducing power. In polyphenol and flavonoid concentrations, 32.989±1.610 mg/g and 11.098±0.261 mg/g were observed each. The above results show that cells survived in the test concentrations more than 80 percent, confirming the low toxicity of Geranium maculatum extract. According to whitening testing, melanin synthesis was reduced depending on concentration, and at the same time, 40.62±2.07% of melanin production inhibition was found at 100 ㎍/mL. In anti-inflammatory testing, inflammation was reduced depending on concentration, and 27.86±2.82% of inhibition of inflammation was detected simultaneously, confirming the applicability of Geranium maculatum extract as a cosmeceutical ingredient.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.136-141
• /
• 2010

The purpose of this study is to examine the structure and heat generation mechanism of low voltage switches used to turn on or off the power supply to an indoor lighting system and investigate how the fixtures and movable contacts of the switches are damaged depending on the types of energy sources in order to secure the judgment base for expected PL disputes. Based on the Korean Standard (KS) testing method for incombustibility, this study applied a general flame to the switch. In addition, current was supplied to the switch using the PCITS (Primary Current Injection Test System). The ambient temperature and humidity were maintained at $22{\pm}2^{\circ}C$ and 40~60% respectively while performing the test. It is thought that the switch generated heat due to a defective connection of the wire and clip, insulation deterioration and defective contact of the movable contact, etc. The surface of the switch damaged by the general flame was uniformly carbonized. When the flame source was removed, the fire on the switch was extinguished naturally. From the result obtained by disassembling the switch carbonized by the general flame, it could be seen that fixtures and movable contacts remained in comparatively good shape but the enclosure, clip support, movable contact, indicating lamp, etc. showed carbonization and discoloration. In the case of the switch damaged by overcurrent, the clip connecting the wires, clip support, etc. showed almost no trace of damage, but the fixtures, movable contact, indicating lamp, etc. were severely carbonized. That is, the sections with high contact resistance were intensively damaged and showed a damage pattern indicating that carbonization progressed from the inside to the outside. Therefore, it is possible to judge the initial energy source by analyzing the characteristics of the carbonization pattern and the metal fixtures of damaged switches.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.371-379
• /
• 2018

In many countries, recycling coal ashes as backfill materials for subsided lands, abandoned mine tunnels, and road pipeline constructions by making low-strength concretes with minimal amounts of cement is frequently considered for massive treatment of coal ashes. This study investigates the variation of heavy metals in the concrete test pieces prepared for the cases of using only Portland cement as binding material, fly ash as a replacement of the cement, sand as aggregates, and disposed ashes in the ash ponds as a replacement of aggregates. Heavy metal contents were measured based on the aqua regia extraction technique following the Korean Standard for Fair Testing of Soil Contamination and the influences of each materials on the total heavy metal contents were also assessed. Results show that the cement has the highest Cu, Pb, and Zn concentrations than any other materials. Therefore, the test pieces show significant concentration decreases for those metals when the cement was replaced by fly ash. Ponded ash shows low concentrations relative to fly ash in most of the parameters but shows higher Cu and Ni, and lower Pb levels than the sand aggregate. In overall, heavy metal levels of the test pieces are regulated by mixing among the used materials. Test pieces prepared during this study always show concentrations much lower than the Worrisome Level of Soil Contamination (Area 1), which was designated by the Soil Environment Conservation Act of Korea.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.311-318
• /
• 2014

This paper is to introduce a lighting source controller using high brightness LED to create a clear and reliable condition for an accurate measurement and testing, which is a core technology in clinical image system and mechanical automation system. This controller is designed to supply a stable power in a constant-current system by installing a high brightness LED driver, and to improve the reproducibility of brightness by using 32-bit ARM processor core, dividing brightness quantity into 256 levels, making the remote control and the external interface possible, and preventing and digitizing the brightness inaccuracy caused by errors of resistance values. This controller enables the lighting range to be wide and possible in a low lighting level compared to analog, adds the RS-485 communication function, and makes it for the users to control the on-off function and the dimming level by receiving date from an external device.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.78-85
• /
• 2014

The Mu-communication board supported by hybrid communication is designed with Cortex M3, which is a low power energy consumption 32-bit microcontroller. The Cortex M3 microcontroller has UART(Universal asynchronous receiver/transmitter) ports which can set appropriately using the command line interpreter (CLI) program with each port. URAT ports are used for hybrid communication modems, GPS modules, etc. When the socket type was compared with the short message service type, the socket type was proven to be better. By improving the receiving performance in the control and management system of the AtoN, data loss was minimized. During the testing of the socket and SMS, data was collected from each buoy for 12 hours every 1 minute and the receiving rate of the data was found to be more than 98.58 % and 99.42 % respectively.

• Korean Journal of Biological Psychiatry
• /
• v.15 no.3
• /
• pp.186-193
• /
• 2008

Objectives : The authors tried to investigate the characteristics of Heart Rate Variability(HRV) among the subjects with metabolic syndrome for testing the possibility of clinical application of HRV in evaluating metabolic syndrome. Methods : We examined the difference of the means of HRV between 122 subjects of metabolic syndrome and 1057 healthy controls using T-test, and the change of means in HRV according to increasing risk factors of metabolic syndrome. Using multiple regression analysis, we examined the association of HRV with the risk factors of metabolic syndrome. Results : The HRV indices including SDNN(Standard Deviation of all normal NN intervals), RMSSD(the square Root of the Mean Squared Differences of successive all normal NN interval), TP(Total Power), LF(Low Freuency), and HF(High Frequency) were significantly lower in the metabolic syndrome group than in the normal control group, and the means of all HRV indices except LF/HF were decreased consistently according to increasing risk factors of metabolic syndrome. The fasting glucose, triglyceride, and waist circumference were dependent factors that contributed significantly to the change of HRV. Conclusion : These findings suggest metabolic syndrome adversely affects cardiac autonomic system and HRV could be a useful method for evaluating metabolic syndrome.

• Progress in Medical Physics
• /
• v.2 no.2
• /
• pp.129-139
• /
• 1991

The method of etching tracks in PN-3 dosimeter has been applied to tracks of recoil protons from a neutron source. Both the etch and the detection response of PN-3 has been studied as a function of etched-track diameters against various parameters. We could obtain very useful informations about charge, energy, and mass of particles and the relationship between the track etching rate and the track forming procedure in order to analyze the particle recorded in the solid state track detector. The best etching condition could be found by means of changing the etching circumstances for various energies and particles in order to detect the charged particle accurately. It could be influenced widely that the polymer plastic detector could develep the detecting technique for the low energy level neutron and could be used as a neutron dosimeter in the radiation field such as the nuclear power station, the medical institute and the nondtructive testing institute.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1117-1123
• /
• 2008

Applications for mobile multimedia are testing the performance limits of present day CPUs with variety. However, hardwired solutions are inflexible and expensive to develop. CPUs with flexibility have limitation of performance. So, the requirement for both ASIC-like performance and CPU-like flexibility has led to reconfigurable processor. Mobile systems require low power and high performance concurrently. In this paper, we propose reconfigurable processor for mobile multimedia with high energy efficiency. Reconfigurable processor with 121MOPS/mW is developed by 130nm CMOS technology. And the processor was simulated for energy efficiency with 539MOPS/mW by 90nm CMOS technology and effective use of instructions. And we tested its applications for multimedia field. We tested the case of inverse MDCT for MP3 and DF for MPEG4 and ME for H.264.

• Journal of electromagnetic engineering and science
• /
• v.13 no.3
• /
• pp.178-185
• /
• 2013

This paper introduces a high-efficiency, high-gain, broadband quasi-Yagi antenna, and its four-element array for use in 60-GHz wireless communications. The antenna was fed by a microstrip-to-slotline transition consisting of a curved microstripline and a circular slot to allow broadband characteristics. A corrugated ground plane was employed as a reflector to improve the gains in the low-frequency region of the operation bandwidth, and consequently, to reduce variation. The single antenna yielded an impedance bandwidth of 49 to 69 GHz for $|S_{11}|$ <-10dB and a gain of >12.0 dBi while the array exhibited a bandwidth of 52 to 68 GHz and a gain greater than 15.0 dBi. Both proposed designs had small gain variations (${\pm}0.5$ dBi) and high radiation efficiency (>95%) in the 60-GHz bands. The features of the proposed antenna were validated by designing, fabricating, and testing a scaled-up configuration of the single antenna at the 15-GHz band. The measurements resulted in an impedance bandwidth of 13.0 to 17.5 GHz for $|S_{11}|$ <-10dB, a gain of 10.1 to 13.2 dBi, and radiation efficiency in excess of 88% within this bandwidth. Additionally, the 15-GHz antenna yielded quite symmetric radiation profiles in both E- and H-planes, with a high front-to-back ratio.