• Journal of Dairy Science and Biotechnology
• /
• 제33권1호
• /
• pp.27-34
• /
• 2015

본 연구에서는 dispersive-SPE를 사용하여 간편하고, 신속하며, 경제적인 우유 내 19종 잔류농약의 동시 다성분 분석법을 설정하고자 하였다. Liquid-liquid partitioning method와 low-temperature cleanup method를 적용한 추출방법과 PSA 및 PSA + C18의 sorbent가 사용된 dispersive-SPE를 사용한 정제방법을 비교 실험하였으며, GC/MS의 선택이온 검색법(selected ion monitoring, SIM)으로 정량 분석하였다. matrix-matched standards와 matrix-free standards를 사용하여 분석방법의 matrix enhancement effect를 확인하였고, 분석방법 설정을 위한 비교실험의 결과, low-temperature cleanup 방법으로 추출하여 dispersive-SPE(PSA + C18)로 정제하는 방법이 시료 추출물의 간섭물질을 제거하는데 가장 효과적이고, 첨가한 $1{\mu}g/mL$에 대한 개별 농약 성분의 회수율 또한 전체적으로 가장 높은 수준을 나타내었으며, 모든 농약 성분의 RSD(%)가 20% 이하로서 기준에 적합한 재현성을 나타내었다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.59-63
• /
• 2003

Modal properties of guided waves along circular dispersive double negative (DNG) index metamaterial rod waveguides are numerically investigated. Identical forms of dispersive dielectric and magnetic material constants are used for simplicity. For degenerated azimuthally symmetric mode, a multimode region, a single mode region, a band gap region and a forbidden region are found which cannot be observed in the case of the conventional dielectric rod waveguide. As the normalized frequency goes down, discrete guided modes are continuously generated, which is a reverse property of conventional dielectric rod waveguide. Also, there are high-frequency cutoffs, which have been generally examined in dispersive circular geometries such as a plasma column or a plasma Goubau line. In the single mode region, both the low- and high-frequency cutoffs are existed where the propagation constants are continued between the guided oscillating and surface modes.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.59-64
• /
• 2002

In this paper, 10$\mu$ m-elevated MEMS CPWs on various substrates are presented. Effective dielectric constants of elevated CPW(ECPW) on polyimide-loaded silicon or alumina substrate are examined and characteristic impedances are also computed versus elevation height. Dispersive property of ECPW and its electromagnetic field distributions are studied through 3-D FDTD algorithm for optimum design. Attenuation of ECPW is measured with TRL calibration procedure and revealed about 3.2 43 lower than that of conventional CPW on the same low-resistivity silicon at 40 CHz. ECPW on polyimide-loaded silicon with overlapped configuration reveals 0.2 dB/mm. Especially, alumina substrate imposes better attenuation than silicon.

• ETRI Journal
• /
• 제42권4호
• /
• pp.619-632
• /
• 2020

Highly dispersive S-boxes are desirable in cryptosystems as nonlinear confusion sublayers for resisting modern attacks. For a near optimal cryptosystem resistant to modern cryptanalysis, a highly nonlinear and low differential probability (DP) value is required. We propose a method based on a piecewise linear chaotic map (PWLCM) with optimization conditions. Thus, the linear propagation of information in a cryptosystem appearing as a high DP during differential cryptanalysis of an S-box is minimized. While mapping from the chaotic trajectory to integer domain, a randomness test is performed that justifies the nonlinear behavior of the highly dispersive and nonlinear chaotic S-box. The proposed scheme is vetted using well-established cryptographic performance criteria. The proposed S-box meets the cryptographic performance criteria and further minimizes the differential propagation justified by the low DP value. The suitability of the proposed S-box is also tested using an image encryption algorithm. Results show that the proposed S-box as a confusion component entails a high level of security and improves resistance against all known attacks.

• 센서학회지
• /
• 제30권4호
• /
• pp.250-254
• /
• 2021

A highly sensitive and selective non-dispersive infrared (NDIR) carbon dioxide gas sensor requires achieving high transmittance and narrow full width at half maximum (FWHM), which depends on the interface of the optical filter for precise measurement of carbon dioxide concentration. This paper presents the design, simulation, and fabrication of a Fabry-Perot filter based on a distributed Bragg reflector (DBR) for a low-cost NDIR carbon dioxide sensor. The Fabry-Perot filter consists of upper and lower DBR pairs, which comprise multilayered stacks of alternating high- and low-index thin films, and a cavity layer for the resonance of incident light. As the number of DBR pairs inside the reflector increases, the FWHM of the transmitted light becomes narrower, but the transmittance of light decreases substantially. Therefore, it is essential to analyze the relationship between the FWHM and transmittance according to the number of DBR pairs. The DBR is made of silicon and silicon dioxide by RF magnetron sputtering on a glass wafer. After the optimal conditions based on simulation results were realized, the DBR exhibited a light transmittance of 38.5% at 4.26 ㎛ and an FWHM of 158 nm. The improved results substantiate the advantages of the low-cost and minimized process compared to expensive commercial filters.

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.20-26
• /
• 2015

Objectives: To evaluate the biodurability of Korean Chrysotile(KC), the changes in fibers numbers and changes in the element composition of fibers from the lung of Sprague-Dawley rats instilled KC(average size $4.74{\mu}m$, $59,043{\times}10^6$ fibers/mg) was estimated. Methods: Rats were administered 1 mg KC(low group) or 2 mg KC(high group) by a single intratracheal instillation. At each time point(5 days, 5 weeks, 10 weeks), the numbers of KC fibers and the changes of element composition(atomic %) of KC fibers from the lung of the rats were analyzed with transmission electron microscope equipped with energy dispersive X-ray spectrometer. Results: Over time, the number of fibers within the lungs of animals were reduced. The average length of the low and high group is significantly reduced from 5 days after administration. Over time, the fiber ratio of at least $5{\mu}m$ remaining in the lung tissue of the low concentration group was up but the high group was reduced. From day 5 after administration, the composition ratio(Mg) was significantly decreased in all groups. Conclusions: Size and composition of Korean Chrysotile in the lung tissue of rats was changed from 5 days.

• 한국전자파학회논문지
• /
• 제15권10호
• /
• pp.977-982
• /
• 2004

본 논문에서는 유한 시간 차분법(FDTD) 내에서 PLRC(Piecewise Linear Recursive Convolution)법을 이용한 분산성 물질에 대한 비등방성 흡수체(APML)를 제안한다. 제안된 흡수체는 비선형, 분산성 매질 해석시 무한 경계조건을 표현하기 위해 사용될 수 있다. 제안된 흡수체는 기존의 APML 정식화 과정에서 분산 특성을 고려한 것이며 PLRC법의 장점인 빠른 계산시간, 저 메모리 사용, 다극 감수율의 간편한 정식화 등의 장점을 가지고 있다. 개발된 분산성 APML은 드바이(Debye)매질과 로렌츠(Lorentz) 매질 등의 분산성 물질의 해석에 적용하였으며 수치실험을 통해 흡수경계에서 뛰어난 흡수율을 가짐을 보였다.

• 한국전자파학회논문지
• /
• 제15권10호
• /
• pp.983-995
• /
• 2004

본 논문에서는 비이상적인 임펄스 통신용 광대역 송수신 안테나간의 전달함수에 포함된 확산 및 공진 특성을 보상하기 위한 사전 왜곡 필터 기법에 대해 소개한다. 일반적으로 비이상적인 광대역 안테나의 사용으로부터 발생하는 확산 및 특정 주파수에서의 공진 현상으로 인하여 송신 임펄스 신호의 변형을 가져오며, 이로 인해 이상적인 안테나 사용을 가정 한 참조 신호를 수신단에서 사용할 경우 코히어런트 상관 처리과정상의 이득 축소로 인해 전체 통신 시스템의 성능을 저하시키게 된다. 이러한 문제점을 해결하기 위해 본 논문에서는 비이상적인 송수신 안테나간의 전체 전달함수 특성에서 왜곡 특성을 추출하여 이를 구현 가능한 최소위상 특성을 갖는 ARMA(Auto-Regressive Moving Average) 형태로 등가 모델링하고 안정성이 보장된 역 필터, 즉 사전 왜곡 보상 필터를 구축하여 확산 및 공진 특성을 능동적으로 보상하는 기법에 대하여 설명한다. 이와 관련하여 시뮬레이션을 통해 형태가 다른 다이폴 안테나에 대한 사전보상 필터를 송신단에 적용시 임펄스 통신 시스템의 성능이 향상됨을 입증한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.330-334
• /
• 2004

In this paper, we studied on the fire dispersive patterns and the fire progress at the power cord sets for low voltage appliances in the wall-model. For the experiment, we manufactured a wall-model and applied the external flame at the power cord sets. From the results, short-circuit of the power cord sets was haunted by the external flame it was disconnected with the flashing and the scattering. The fire progress on the polyvinyl chloride insulated flexibel cords is not observed because the ignition energy decreases. In case of rubber insulated flexible cords, however, the fire was progressed continuously. Molten marks were formed at a two electric wire by continuous electric discharge in power source part. A large molten mark was formed in load part. And the columnar structure and voids were observed in molten wire.

• 센서학회지
• /
• 제21권6호
• /
• pp.408-412
• /
• 2012

An in-line dispersive delay line (DDL) demands low and controllable reflectivity of the reflectors, especially if the surface acoustic wave (SAW) propagates all the way along the reflecting structure. The metal reflectors are usually too strong and introduce too much attenuation in such a device. The proposed solution of this problem is to spatially separate the acoustic channels for different frequencies with the help of Fan-shaped Transducers (FIDT) and to use narrow open metal reflectors to reduce reflectivity. Special arrangement of FIDT is performed to use 180-deg. reflection of the SAW. Narrow open metal strips with a metallisation ratio of the order of 20% are used as reflectors with small and controllable reflectivity. Reflectivity of such strips is estimated both theoretically and experimentally. Experimental performance of the proposed DDL is presented.