• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.61-70
• /
• 2008

This paper designed the antenna for collecting and servicing the traffic information that apply to freeway Traffic Management System, as using DSRC (Dedicated Short Range Communication). Active DSRC is the technology that is using 5.8GHz Radio Frequency to a mean Sequency and there are a lot of the case occurring a physical electric wave shadowing because of the traveling straight of a electric wave. In such inferior communication environment, it constructed the stabilized communication link that can do collecting and servicing the correct traffic information and designed the beam pattern considering the establishment position of the antenna that can apply to various road environments and a communication area. By considering the communication link environment, this paper designed and manufacture the mean frequency of 5.8GHz, the input loss of -17dB in 75MHz bandwidth, the Axial ratio of 1.5:1, and $2{\times}4$ array microstrip antenna which beam pattern have the characteristic of $55^{\circ}$ horizontal half power beam width and $26^{\circ}$elevation half power beam width and the minimum establishment height of the antenna was designed as 14m for avoiding electric wave shadowing on a physical condition between vehicles

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.464-466
• /
• 2019

Controllers used in nuclear power plants require high reliability. A controller including a Field Programmable Gate Array (FPGA) and a Complex Programmable Logic Device (referred to hereinafter as FPGA) has been applied to many Nuclear Power Plants (NPP) in the past, including the APR1400 (Advanced Power Reactor 1400), a Korean digital nuclear power plant. Initially, the FPGA was considered as a general IC (Integrated Circuit) and verified only by device verification and performance testing. In the 1990s, research on FPGA verification began, and until the FPGA became a chip, it was regarded as software and the software Verification and Validation (V&V) using IEEE 1012-2004 was implemented. Currently, IEC 62566, which is a European standard, has been applied for a lot of verification. This method has been evaluated as the most sensible method to date. This is because the method of verifying the characteristics of SoC (System on Chip), which has been a problem in the existing verification method, is sufficiently applied. However, IEC 62566 is a European standard that has not yet been adopted in the United States and maintains the application of IEEE 1012 for FPGA. IEEE 1012-2004 or IEC 62566 is a technical standard. In practice, various methods are applied to meet technical standards. In this paper, we describe the procedure and important points of verification method of Nuclear Safety Class FPGA applying SoC verification method.

• IMMUNE NETWORK
• /
• v.1 no.1
• /
• pp.7-13
• /
• 2001

Currently 18 monoclonal antibodies were approved by FDA for inj ection into humans for therapeutic or diagnostic purpose. And 146 clinical trials are under way to evaluate the efficacy of monoclonal antibodies as anti-cancer agents, which comprise 9 % of clinical trials in cancer therapy field. When considering a lot of disappointment and worries existed in this field during the past 15 years, this boom could be called as resurrection. Antibodies have several merits over small molecule drug. First of all it is easier and faster in development, as proper immunization of the target proteins usually raises good antibody response. The side effects of antibodies are more likely to be checked out in immunohistomchemical staining of whole human tissues. Antibody has better pharmacokinetics, which means a longer half-life. And it is non-toxic as it is purely a "natural drug. Vast array of methods was developed to get the recombinant antibodies to be used as drug. The mice with human immunoglobulin genes were generated. Fully human antibodies can be developed in fast and easy way from these mice through immunization. These mice could make even human monoclonal antibodies against any human antigen like albumin. The concept of combinatorial library was also actively adopted for this purpose. Specific antibodies can be screened out from phage, mRNA, ribosomal library displaying recombinant antibodies like single chain Fvs or Fabs. Then the coding genes of these specific antibodies are obtained from the selected protein-gene units, and used for industrial scale production. Both $na\ddot{i}ve$ and immunized libraries are proved to be effective for this purpose. In post-map arena, antibodies are receiving another spotlight as molecular probes against numerous targets screened out from functional genomics or proteomics. Actually many of these antibodies used for this purpose are already human ones. Through alliance of these two actively growing research areas, antibody would play a central role in target discovery and drug development.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.367-373
• /
• 2011

Guided waves inspection techniques that are different with inspection technique by bulk waves are widely used in pipe line evaluation due to advantages of long distance inspection. However, most of pipe lines at industrial fields are buried and/or coated. In this case, due to the attenuation effect from soil and/or coating material, there are a lot of difficulty on inspection by conventional ultrasonic technique. In this paper, guided waves propagating patterns are calculated with respect to excitation mode by Normal Mode Expansion(NME). Guided waves patterns based on excited by single transducer and guided wave focusing technique have employed to analyze focusing pattern on a pipe. A longitudinal mode and high order flexural modes are used with various number of transducers to determine sensitivity. Guided waves energy excited by multi transducer with focusing algorithm was successfully focused at a desired point.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.12
• /
• pp.656-664
• /
• 2007

Field-Programmable Gate Arrays (FPGAs) are a revolutionary new type of user-programmable integrated circuits that provide fast, inexpensive access to customized VLSI. However, as the target application speed increases, power-consumption and wire-delay on interconnection become more critical factors during programming an FPGA. Especially, the interconnection of the FPGA consumes 65% of the total FPGA power consumption. A previous research show that if the length of interconnection is shirked, power-consumption can be reduced because an interconnection has a lot of effect on power-consumption. For solving this problem that reducing the number of wires routed, the three dimension FPGA is proposed. However, this structure physical wires and an area of switches is increased by making topology complex. This paper propose a novel FPGA architecture that modifies the three dimension FPGA and compare the number of interconnection of Virtex II and 3D FPGA with the proposed FPGA architecture using the FPGA Editor of Xilinx ISE and a global routing and length estimation program.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.350-354
• /
• 2010

In natural world various inorganic crystals are grown with controlled shape and size in hybrid forms with organics. Such natural processes have been attempted much to mimick artificially. One of the example is calcium carbonate which has been examined a lot in the field of biomineralization. In this study, we utilize well-organized surface of polydiacetylene(PDA) films as the crystal-growing template. We devised a novel mini-arrayer device that transfers PDA films at air/water interfaces of each array well and deposit them to hydrophobized glass substrates. This technical improvement will contribute to facilitate better understandings of biomineralization mechanism.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.97-104
• /
• 2020

In this paper, we propose a random number generator PP(PingPong256) and a shuffle technique to improve the problem that the encrypted image is damaged due to a lot of noise by the channel coding of wireless communication recommended in the special environment of space. The PP can constantly generate random numbers by entering an initial value of 512 bits. Random numbers can be encrypted through images and exclusive logical computations. Random numbers can be encrypted through images and exclusive logical computations. The shuffle technique randomly rearranges the image pixel positions while synchronizing the image pixel position and the random number array position and moving the random number arrangement in ascending order. Therefore, the use of PP and shuffle techniques in channel coding allows all pixels to be finely distributed and transmit high-quality images even in poor transmission environments.

• Applied Microscopy
• /
• v.34 no.3
• /
• pp.199-209
• /
• 2004

The migut epitheluim of the last instar larva in the mosquito larvae, Anopheles sinensis was observed with electron microscopes. The midgut epitheluim of the mosquito larva is composed of a single-layered columnar absorptive cells, regenerative cells and secretory granular cells. The free surface of the columnar absorptive cells has a regular array of microvilli 'brush border', while cell membranes close to the basal lamina are extrmely infolded and a lot of mitochondria are concentrated in those processes. The columnar absorptive cells also contain cell organelles expected to be found in absorptive cell. Midgut regenerative cells which are positioned basally in the epithelium form the groups, which are called 'nidi', composed of 1 or $2{\sim}3$ cells, they show darker appearance than the columnar absoptive cells. The secretory granular cells contain numerous electron dense granules, $200{\sim}400$ nm in diameter. The cone shaped secretory granular cells are located in the basal portion of the midgut epitheluim. The epithelium is surrounded by the subepithelial space and muscle bundles. The subepithelial space, which is filled with fibrous connective tissue, is innervated by many axon cells and tracheoles.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.45.2-46
• /
• 2017

3C 84 (NGC 1275) is one of the most famous radio galaxies and a lot of VLBI observations have been conducted to date because of its brightness and proximity (z = 0.0176; 1 mas = 0.36 pc). The source is entering a significantly active phase with long-term increase in radio flux at cm wavelengths since 2005, and the increased activity at very-high-energy (VHE) gamma rays. In order to study properties of sub-pc-scale structure and the circumnuclear environment in 3C 84, we have conducted multi-epoch VLBI observations with the Korean VLBI Network (KVN) at 86 and 129 GHz, and monthly monitoring by the KVN and VERA Array (KaVA) at 43 GHz from 2015 August. Following the report in the previous KAS meeting (cf. 2016 KAS Autumn Annual Meeting, [구 GC-10]), we present further results mainly on the basis of twelve-epoch observations with KaVA at 43 GHz. Through the monthly monitoring with KaVA, we found that peak intensity of the pc-scale southern lobe (C3) was increased from $2.60\;Jy\;beam^{-1}$ in 2015 October to $9.80\;Jy\;beam^{-1}$ in 2016 June, corresponding to a flux increase of 3.7 times in eight months. We also detected change in direction of motion of C3 from transversal to outward with respect to C1, concurrently with the beginning of its flux increase in 2015 October. We consider that these phenomena are due to interaction of C3 with the ambient medium, and are related to the gamma-ray flare which has been detected with VHE gamma-ray telescopes such as MAGIC and VERITAS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.689-695
• /
• 2011

In this paper, available power generation on the road from renewable energy technologies on how to use the piezoelectric effect has been studied. A lot of vehicles on road that can generate electricity using renewable energy technology as part of the external shock to convert the load into electrical energy using piezoelectric effect piezoelectric generator can be applied to road space. Piezoelectric power harvesting using piezoelectric ceramics for the development of impact load characteristics were tested as function of various experimental design such as generator design and array of piezo-ceramic. To design the piezoelectric generator, the characteristics of piezoelectric ceremic were compared depending on the type of impact load as function of impact load, shock-absorbing.