• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.47-53
• /
• 2011

The signal transmission properties of the connector such as insertion loss and return loss are investigated using analysis procedure of S-parameter simulation, equivalent model extraction, and characteristic impedance calculation. S-parameter simulation is performed by connector's modeling and solving based on 3-dimensional finite element method. The connector's equivalent model of ${\pi}$ type is are proposed and extracted with an optimization process of circuit analysis simulator. The characteristic impedance of the connector is calculated with results of circuit analysis simulation and S-parameter data. According to the connector's characteristic impedance, it's revised design is carried out. In this work, the connector's effective contact area is increased and its body is applied as a high dielectric material in order to increase its capacitance and then obtain impedance matching. Therefore, return loss of the connector is improved by approximately 10 dB due to its design revision.

• Biomolecules & Therapeutics
• /
• v.10 no.4
• /
• pp.236-239
• /
• 2002

The goal of this study was to evaluate the antidiarrheal efficacy of $Lacteol^{TM}$-loperamide combination against the mouse model of secretory diarrhea. Secretory dirrhea was induced in mice by p.o. administration of castor oil (0.3 ml). Antidirrheal effects of $Lacteol^{TM}$-loperamide combination were compared with each individual component. $Lacteol^{TM}$-loperamide combination was the most potent among these agents, eliminating diarrhea in 100% of mice at a dose 1360/4 mg/kg (Lacteol/loperamide, respectively). In this study, we also measured changes of bodyweight as another indicator of the dirrhea, based on the assumption that lower bodyweight loss represented reduced fecal passage. The bodyweight loss of $Lacteol^{TM}$-loperamide combination administered group was 4 times lower than that of vehicle control. These findings indicate that $Lacteol^{TM}$-loperamide combination may be more potent than individual component in its antidiarrheal action, so we are going to challenge this combination for further study and clinical evaluation.

• Smart Structures and Systems
• /
• v.19 no.1
• /
• pp.57-66
• /
• 2017

Nanocomposites reinforced with carbon nanotube fibers exhibit greater stiffness, strength and damping properties in comparison to conventional composites reinforced with carbon/glass fibers. Consequently, most of the nanocomposite research is focused in understanding the dynamic characteristics, which are highly useful in applications such as vibration control and energy harvesting. It has been observed that those nanocomposites show better stiffness when the geometry of nanotubes is straight as compared to curvilinear although nanotube agglomeration may exist. In this work the damping behavior of the nanocomposite is characterized in terms of loss factor under the presence of nanotube agglomerations. A micro stick-slip damping model is used to compute the damping properties of the nanocomposites with multiwall carbon nanotubes. The present formulation considers the slippage between the interface of the matrix and the nanotubes as well as the slippage between the interlayers in the nanotubes. The nanotube agglomerations model is also presented. Results are computed based on the loss factor expressed in terms of strain amplitude and nanotube agglomerations. The results show that although-among the various factors such as the material properties (moduli of nanotubes and polymer matrix) and the geometric properties (number of nanotubes, volume fraction of nanotubes, and critical interfacial shear stresses), the agglomeration of nanotubes significantly influences the damping properties of the nanocomposites. Therefore the full potential of nanocomposites to be used for damping applications needs to be analyzed under the influence of nanotube agglomerations.

• Journal of Power Electronics
• /
• v.11 no.1
• /
• pp.90-96
• /
• 2011

Congestion management is one of the most challenging aspects in the recently deregulated electricity markets. FACTS devices have been shown to be an efficient alternative to control the flow of power in lines, resulting in increased loadability, lower system loss and a reduced cost of production. In this paper, the application of a static series synchronous compensator (SSSC) for the purpose of congestion management of power systems has been studied. A sensitivity-based analysis method is utilized for effective determination of the SSSC location in an electricity market. The method is topology based and it is independent of the system operation point. A power injection p-model is developed for the SSSC in this study. Numerical results based on the modified IEEE 14 bus system with/without the SSSC demonstrate the feasibility as well as the effectiveness of the SSSC for congestion management in a network. The results obtained when using the SSSC to improve system transfer capability and congestion management is encouraging.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.201-210
• /
• 2002

A number or MPLS ATM switching system have been proposed to increase the access speed or current routers, but they cannot satisfy the Internet users who use diverse applications. So they are required to support the so-called differential service, which discriminates service behaviors according to the service class. In this paper, to support this differential service we suggest an LSP control method, which uses the extended LDP message and establishes several different LSPs for each FEC according to the service class. Also, we propose an marking algorithm using the cell loss priority field or ATM cells in order to process the differential service according to application categories. In addition, we present a forwarding procedure based on the LSP control method and the marking algorithm. A forwarding model applied this forwarding procedure can be easily implemented with a minimum modification of existing MPLS ATM switching systems. Therefore, we can save cost and time needed to implement the proposed model. Finally, we estimate the performance behaviors of the proposed application-based forwarding model by the AweSim simulation package.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.45-54
• /
• 2002

MPLS(Multiprotocol Label Switching) is regarded as a core technology for migrating to the next generation Internet. In this paper, we propose an dynamic flow admission control supporting DiffServ(Differentiated Services) to provide QoS in MPLS networks. Our proposed model dynamically adjusts the amount of admissible traffic based on transmittable capacity over one outgoing port. It then transmits the Packets while avoiding congested area resulting traffic loss. Ingress LSRs find out the congested area by collecting network state information at QoS state update for QoS routing table. Our Proposed model manages the resource efficiently by protecting the waste of resources that is a critical Problem of DiffServ and makes much more flows enter the network to be served.

• The Journal of Information Technology and Database
• /
• v.6 no.1
• /
• pp.1-13
• /
• 1999

The modeling components in the object-oriented paradigm are based on the object, not the structured function or procedure. That is, in the past, when one wanted to solve problems, he would describe the solution procedure. However, the object-oriented paradigm includes the concepts that solve problems through interaction between objects. The object-oriented model is constructed by describing the relationship between object to represent the real world. As in object-oriented model the relationships between objects increase, the control of objects caused by their insertions, deletions, and modifications comes to be very complex and difficult. Because the loss of the referential integrity happens and the object reusability is reduced. For these reasons, the necessity of the control of objects and the visualization of the relationships between them is required. In order that we design a database necessary to implement Object Browser that has functionalities to visualize Java objects and to perform the query processing in Java object modeling, in this paper we show the processes for EER modeling on Java object and its transformation into relational database schema. In addition we implement Java Object Parser that parses Java object and inserts the parsed results into the implemented database.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.775-780
• /
• 2008

A dynamic model to simulate LNG reliquefaction process has been developed. The model was applied to two candidate cycles for LNG reliquefaction process, which are Reverse Brayton and Claude cycles. The simulation was intended to simulate the pilot plant under construction for operation of the two cycles and evaluate their feasibility. According to the simulation results, both satisfy control requirements for safe operation of brazed aluminum plate-fin type heat exchangers. In view of energy consumption, the Reverse Brayton cycle is more efficient than the Claude cycle. The latter has an expansion valve in addition to the common facilities sharing with the Reverse Brayton cycle. The expansion valve is a main cause to the efficiency loss. It generates a significant amount of entropy associated with its throttling and increases circulation flow rates of the refrigerant and power consumption caused by its leaking resulting in lowered pressure ratio. It is concluded that the Reverse Brayton cycle is more efficient and simpler in control and construction than the Claude cycle.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.504-517
• /
• 2015

This paper presents a novel switching voltage model and an offset-based pulse width modulation (PWM) scheme for multilevel inverters with unbalanced DC sources. The switching voltage model under a DC voltage imbalance will be formulated in general form for multilevel neutral-point-clamped topologies. Analysis of the reference switching voltages from active and non-active switching voltage components in abc coordinates can enable voltage implementation for an unbalanced DC-source condition. Offset voltage is introduced as an indispensable variable in the switching voltage model for multilevel voltage-source inverters. The PWM performance is controlled through the design of two offset components in a subsequence. One main offset may refer to the common mode voltage, and the other offset restricts its effect on the quality of PWM control in related DC levels. The PWM quality can be improved as the switching loss is reduced in a discontinuous PWM mode by setting the local offset, which is related to the load currents. The validity of the proposed algorithm is verified by experimental results.

• Journal of Bio-Environment Control
• /
• v.2 no.1
• /
• pp.27-36
• /
• 1993

Carbon dioxide enrichment for greenhouse crops has generally been a standard commercial practice for many years. Vegetable crops such as tomato, cucumber, and lettuce respond positively to the $CO_2$ enrichment. But improper $CO_2$ enrichment leads to physiological damage and economical loss. This study was carried out to develop a $CO_2$ concentration control algorithm considering growth stage and efficiency. The measurand was $CO_2$ consumption rate and top fresh weight that represents growth stage. The weight of top fresh lettuce as a whole in the tray was measured through a non-destructive method. The demand in $CO_2$ concentration according to growth stage was investigated. The results are summarized as follows. 1. The $CO_2$ consumption rate could be measured within the error of $\pm$ 15.4mg$CO_2$/hr in the range of $CO_2$ concentration of 500-1500ppm. 2. The weight of top fresh lettuce could be measured within the error $\pm$ 4.3g in the range of 0-1400g. 3. The $CO_2$ control model developed could determine an economical $CO_2$ supply rate considering $CO_2$ consumption rate and leakage rate. 4. The $CO_2$ control algorithm based on the control model was composed of feedforward control for maintaining a stable $CO_2$ concentration level, and feedback control with $CO_2$ consumption rate and top fresh weight for adapting to the change in $CO_2$ demand by growth stage. 5. For the performance test with the developed control algorithm on lettuce the decrease in $CO_2$ supply rate was obtained without a significant decrease in top fresh weight.