• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.133-145
• /
• 1996

This paper presents an indirect cutting force measuring system, which uses the current signals from the AC servo drive units of the horizontal machining center, with its applications to the adaptive regulation of the cutting forces in various milling processes and to the on-line monitoring of tool breakage. A typical model for the feed-drive control system of a horizontal machining center is developed to analyze cutting force measurement from the drive motor. The pulsating milling forces can be measured indirectly within the bandwidth of the current feedback control loop of the feed-drive system. It is shown that the indirectly measured cutting force signals can be used in the adaptive controller for cutting force regulation. The whole scheme has been embedded in the commercial machining center and a series of cutting experiments on the face cutting processes are performed. The adaptive controller reveals reliable cutting force regulating capability against the various cutting conditions. It is also shown that the tool breakage in milling can be detected within one spindle revolution by adaptively filtering the current signals. The effect of the cutter run-out has been considered for the reliable on-line detection of tool breakage.

• Food Science of Animal Resources
• /
• v.37 no.3
• /
• pp.464-468
• /
• 2017

The identification of pork in commercially processed meats is one of the most crucial issues in the food industry because of religious food ethics, medical purposes, and intentional adulteration to decrease production cost. This study therefore aimed to develop a method for the detection of pork adulteration in meat products using primers specific for pig mitochondrial DNA. Mitochondrial DNA sequences for pig, cattle, chicken, and sheep were obtained from GenBank and aligned. The 294-bp mitochondrial DNA D-loop region was selected as the pig target DNA sequence and appropriate primers were designed using the MUSCLE program. To evaluate primer sensitivity, pork-beef-chicken mixtures were prepared as follows: i) 0% pork-50% beef-50% chicken, ii) 1% pork-49.5% beef-49.5% chicken, iii) 2% pork-49% beef-49% chicken, iv) 5% pork-47.5% beef-47.5% chicken, v) 10% pork-45% beef-45% chicken, and vi) 100% pork-0% beef-0% chicken. In addition, a total of 35 commercially packaged products, including patties, nuggets, meatballs, and sausages containing processed chicken, beef, or a mixture of various meats, were purchased from commercial markets. The primers developed in our study were able to detect as little as 1% pork in the heat treated pork-beef-chicken mixtures. Of the 35 processed products, three samples were pork positive despite being labeled as beef or chicken only or as a beef-chicken mix. These results indicate that the developed primers could be used to detect pork adulteration in various processed meat products for application in safeguarding religious food ethics, detecting allergens, and preventing food adulteration.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1563-1567
• /
• 2012

To investigate the relationship between serum miRNA-21 (miR-21) expression in esophageal squamous cell carcinomas (ESCCs) and its clinicopathologic features, a 1:1 matched case-control study including 21 patients with ESCC and 21 age- and gender-matched healthy controls was carried out. Serum specimens were taken from all subjects. Total RNA was extracted and the stem-loop real time polymerase chain reaction was used to measure serum miR-21 in both groups. Clinical parameters were assessed to determine associations with serum miR-21 concentrations. Serum miR-21 expression in ESCC samples was significantly higher than in paired cancer-free samples (P<0.05). Metastasis was associated with mir-21 expression in serum (P<0.05), ESCC patients with metastasis having 8.4-fold higher serum miR-21 concentrations than healthy controls. There were no statistically significant associations between miR-21 expression and clinicopathologic parameters, such as gender (P>0.05), age (P>0.05), tumor location (P>0.05), cell differentiation (P>0.05), TNM staging (P>0.05), whether chemo/radiotherapy had been administered (P>0.05), or whether surgery had been performed (P>0.05). These findings suggest that the detection of microRNA-21 in serum might serve as a new tumor biomarker in diagnosis and assessment of prognosis of ESCCs.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.85-96
• /
• 1999

For ASME Code pumps in nuclear power plants, inservice test is required to assess the operational readiness in accordance with ASME code and related regulations. The objective of this study therefore, is to develop the technical background of the degradation of pump performances and conditions due to low flow rate operation. In addition. the detection techniques of pump operating conditions are to be developed to enhance the safety and economy of nuclear power plants. A test loop consisted of pump, motor. water tank, flow rate measurements and piping system with flow control devices was established for this study. Two typical pumps, 1-stage volute pump and 3-stage turbine pump, were selected and the test was performed upon two major point of views ; i.e., pump discharge pressure pulsations analysis and pump vibration spectrum analysis. From the test results, it is concluded that (1) the pump vibration affected by the natural frequency of operating pump is significant in the low frequency zone (around 1 Hz) : the vibration amplitude. especially. is an important factor during low flow rate operation. and shall be monitored to ensure that it is within the limit of ASME OM code Part 6, (2) the vibration frequency and pump discharge pressure are affected by vane pass frequency and running speed, (3) the wave phenomena due to the compressiblity of water is anticipated during low flow rate operation. and the pump system shall be designed to prevent it and. finally, (4) the technical background of the degradation of pump performances and conditions due to low flow rate operation is provided.

• Physical Therapy Korea
• /
• v.6 no.3
• /
• pp.11-21
• /
• 1999

Human balance is maintained through a complex process involving sensory detection of body motions, integration of sensorimotor information within the central nervous system, and execution of appropriate musculoskeletal responses. The basic task of balance is to position the body center of gravity (COG) over some portion of the support base. When the COG extends beyond the base of support, the person has exceeded the limits of stability (LOS). At this point, a step or stumble is required to prevent a fall. Automatic postural responses operate to keep the COG over the base of support. They are a set of functionally organized, long-loop responses that act to keep the body in a state of equilibrium. There are four commonly identified automatic postural responses, or strategies. These are ankle strategy, hip strategy, suspensory (knee) strategy, and stepping strategy. Thus, the purpose of this study was to evaluate the LOS using various knee strategies. Forty subjects participated in this study. The subjects were comprised of 20 males and 20 females who were without neurologic, orthopaedic or balance performance impairments. The LOS was measured with a Balance Performance Monitor (BPM) Dataprint Software Version 5.3. The results of this study were as follows: 1) Knee joint angle which is to increase stability of standing balance with using knee strategy was at mid-range. 2) There were statistically significant differences in anteroposterior LOSs according to the knee strategy. 3) There were no statistically significant differences in mediolateral LOSs according to the knee strategy. 4) There were statistically significant differences of anteroposterior LOSs with using knee strategy according to gender. 5) There were no statistically significant differences in mediolateral LOSs with using knee strategy according to gender.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.47-55
• /
• 2012

This paper describes the developed HILS and test equipment in order to test the performances of MMW(Millimeter-Wave) seeker which can detect and track a high speed of short-range ballistic missile and aircraft. This system is used to 141 horn antenna array, array switching, and gain and phase control algorithm to simulate various kind of targets and trajectory of high speed and maneuver moving target. In addition, it simulates not only velocity and range for these targets but also clutter and jamming environments. System configuration and implementation and the measurement results of major subsystems such as target motion simulator, simulation signal generator, high speed data aquisition unit, and central control unit are presented. These systems could verify the detection and tracking performance of MMW seeker through dynamic real-time test based on simulation flight scenario.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.88-93
• /
• 2010

In this paper, an edge detecting sensor using ultrasonic detection module is developed which will be used for areas of industrial applications such as plastic film winding system, cloth winding system, paper roll industry, etc. The developed sensor have properties that more exactly detect the edge line, that less affected by environmental noise, and that it produced more stable measurement output. The mass of the winding object is dominantly affect the dynamics of the system and it could produce undesirable result of the system such as stability of the closed-loop system and accuracy of edge-line-following-control(ELFC) objective. Also, there exist sensor noise due to the mechanical vibration or other environmental effect. These noise also degrade the efficiency of control system. In order to compensate these problems, this paper present a fuzzy PI/PID edge-line-controller, and which is designed and implemented.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.165-174
• /
• 2012

In this study, a method for evaluating the performance of speed measurements was developed to assess the qualities of a vehicle detector. The evaluation method considers measurement errors that are reflected in a reference speed. For this, the concept of uncertainty in measurement was applied to the development method. Other factors such as precedent study, statistical processing techniques, and speed measurement performance method of traffic enforcement equipment and vehicle detection systems were also reviewed. Through this process, the problems of the existing evaluation methods were derived and developed for the new performance evaluation method. Vehicle detectors that are installed in the field were evaluated using the traditional assessment methods and the developed method. As a result, for traditional assessment methods, it was found that evaluation criteria are acceptable, while developed method's criteria are not acceptable. This means that traditional assessment methods do not sufficiently consider errors in measurement, so it has potential to over-estimate for performance of evaluation equipment. On the other hand, it was represented that the developed method should include variable factor such as errors in measurement and more precise compared to traditional assessment methods.

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.36-36
• /
• 2014

Apple blotch, caused by Marssonina coronaria, induce early defoliation in apple and leading to critical economic losses in apple orchards in Korea. Since M. coronaria is difficult to culture, we developed isolation and cultural method. We collected M. coronaria isolates from Gyeongbuk Province and then constructed phylogentic tree based on ITS regions. As the results, phylogenetic relationship indicated that all Korean isolates formed a same cluster and closely related to Chinese isolates [1]. Ecological characteristic of M. coronaria have been observed in apple orchards which located in Gyeongbuk Province from 2011 to present. As the results, the typical apple blotch symptoms were observed from July, and then the infected leaves were discolored and formed acervuli on the leaves. After rainfall, severe infection of symptoms such as discoloration and early defoliation were continuously observed until October. Also overwintered conidia were observed in next March on the fallen diseased leaves [2]. In the last 5 years, ascopores of M. coronaria were not observed in apple orchards which were severely infected by M. coronaria in Korea. Thus, it is assumed that overwintered conidia could be a primary inoculum of M. coronaria. Meanwhile, apple blotch has long latent periods compare to other apple disease. During the latent period, early diagnosis of apple blotch is the most important to control the disease by spray fungicide. In this reason, we developed novel diagnostic method to detect M. coronaria during latent period using optical coherence tomography (OCT) and Loop-mediated isothermal amplification (LAMP) method [2, 3]. In this presentation, it will introduce ecological characterization of M. coronaria in Korea and unique detection technique of M. coronaria in apple. It will be helpful to develop new strategies to control apple blotch in Korea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.515-522
• /
• 2009

In this paper, a novel transmission scheme with spatial modulation is proposed for coded orthogonal frequency division multiplexing (OFDM). The multiple-input multiple-output (MIMO) technique, so-called spatial modulation (SM), divides input data into antenna index and data signals, transmitting data signals through the specific antenna chosen by the antenna index. In order to retrieve data stream at the receiver, SM needs to detect the antenna index which means that data signals are transmitted via a certain antenna. For this reason, it should be guaranteed that channel matrix is orthogonal. For the real environment, a MIMO channel has difficulty in maintaining orthogonality due to spatial correlation. Moreover, the receiver of the conventional SM is operated by hard decision, so that this scheme has a limit to be adopted for practical systems. Therefore, soft-output demappers for the conventional and proposed schemes are derived to detect antenna index and data stream by soft decision, and a novel transmission scheme combined with spatial modulation is proposed to improve the bit error rate (BER) performance of the conventional scheme.