• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.2
• /
• pp.108-115
• /
• 1991

This paper aims at the elucidation of the characteristics of longshore current profile after wave breaking. Wave breakers are always accompanied by complex turbulent process, wave energy losess occur and the mean water level also varies due to the gradient of radiation stress. These with other factors result in the development of longshore currents. Longshore currents have relations to the alongshore sand transport and to the diffusion of contaminants in nearshore region, thus the understanding and elucidation of them are very important from the engineering point of view. Using the calculated results, the factors such as lateral mixing cofficients, bed shear stress. wave angle. wave steepness and bottom slope. which are influencing the longshore current profile. are examined. Also, by comparing the results of longshore currents with the experimental data obtained by other investigators, the procedure proposed in the present study is shown to be valid.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.4
• /
• pp.11-19
• /
• 1986

This study aims at the elucidation of the distribution of longshore currents after wave breaking. Longshore currents have relations to the beach process and dispersion of contaminants in the nearshore region, thus the understanding of its. mechanism is very important. In the present study, using the electromagnetic current meter, the water particle velocity is measured in the 3-dimensional wave field and Eulerian mean velocity is obtained. At the same time, from the dispersion of tracer, the Lagrangian mean velocity is also obtained. It is observed that the longshore currents were confined within the surf zone and the maximum value of them exists in the surf zone. The longshore currents were considered to be constant toward the depth and we obtained the similar distribution of longshore currents between the measured value and the theoretical ones by Longuet-Higgins model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.6
• /
• pp.382-390
• /
• 2015

To simulate a complicated hydrodynamic phenomena in the surf zone, the SWASH model is used in Haeundae Beach. The SWASH model is well known as a model competing with the Boussinesq-type model in terms of near shore waves and wave-induced currents modelling. This study is aimed to the detailed analysis of seasonal waves and wave-induced current simulation in Haeundae Beach, where the representative seasonal wave conditions was obtained from hourly measured wave data in 2014 by Korea Hydrographic and Oceanographic Administration( KHOA). Incident wave conditions were given as irregular waves by JONSWAP spectrum. The calculated seasonal wave-induced current patterns were compared with the field observation data. In summer season, a dominant longshore current toward the east of the beach appears due to the effect of incident waves from the South and the bottom bathymetry, then some rip currents occurs at the central part of the beach. In the winter season, ESE incident waves generates a strong westward longshore currents. However, a weak eastward longshore currents appears at the restricted east side areas of the beach.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.2
• /
• pp.65-71
• /
• 1991

Many investigations of wave deformation without currents have been carried out experimentally and theoretically but, studies treating the effect of longshore current on the wave deformation are few. It is thus necessary to evaluate the effect of longshore current on the wave deformation after breaking. In the paper the wave height attenuation. the wave direction and the variation of mean water level are calculated in which effects of longshore current are involved. To assess the effect of longshore current on the wave deformation, factors above with longshore current are compared with them without longshore current by using calculated results.

• Ocean Systems Engineering
• /
• v.5 no.4
• /
• pp.319-329
• /
• 2015

Submerged breakwaters are used to prevent shore line erosion and sediment transportation. One of their advantages is low visual impact. In this paper, the effects of discontinuous submerged breakwaters over water surface elevation was numerically studied considering the extended Boussinesq equations as governing equations using MIKE21 software. The result of discontinuous breakwater was compared with a beach without breakwater. The results showed that the gap dramatically effects on surface elevation from shore line to offshore. It is also evident from results that with approaching the center of the gap, fluctuation of surface elevation is generated. It is because of passing longshore currents towards offshore through the gap which leads to an increase in sediment transportation rate. Nevertheless, transferring water mass from breakwater gap results in powerful rip currents leading to high changes on longshore wave profile.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.91-107
• /
• 1995

In this paper, previously proposed mechanisms of generation and maintenance of rip currents are grouped into three broad categories; (1) prismatic topography models, (2) non-prismatic topography models and (3) structural controls by natural and/or constructed features, such as headlands, piers. groins, jetties. etc. The prismatic models can explain the occurrence of a rip current on a planar beach, while non-prismatic model needs undulatory topography inside the surf zone to generate and maintain a rip current. Yet more detailed and thorough studies need to be conducted to include all relevant variables and to clarify the mechanism(s) governing rip current. Next a simple model is presented to predict mean longshore currents behind a longshore bar (or submerged breakwaters) by considering mass transport over the bar and the bar morphology. This hydrodynamic model could be extended to include the sedimentary feedback mechanism.

• Journal of Coastal Disaster Prevention
• /
• v.4 no.1
• /
• pp.7-19
• /
• 2017

In this study, waves and currents observed by acoustic AWAC, VECTOR and Aquadopp Profiler in Anmok coastal waters were analysed to account for the variability of wave and current and to understand the mechanism of sediment transport generated by wave-induced current in the surf-zone. The monthly variation of wave and residual currents were analysed and processed with long-term observed AWAC data at station W1, located at the water depth of about 18m measured during from February 2015 to September 2016. Wave-induced currents were also analysed with intensive field measurements such as wave, current, suspended sediment, and bathymetry data observed at the surf-zone during in winter and summer. The statistical result of wave data shows that high waves coming from NNE and NE in winter (DEC-FEB) are dominant due to strong winds from NE. But in the other season waves coming from NE and ENE are prevalent due to the seasonal winds from E and SE. The residual currents with southeastern direction parallel to the shoreline are dominant throughout a year except in winter showing in opposite direction. The speed of ebb-dominant southeastern residual currents decreasing from surface to the bottom is strong in summer and fall but weak in winter and spring. By analysing wave-induced current, we found that cross-shore current were generated by swell waves mainly in winter with incoming wave direction about $45^{\circ}$ normal to the shoreline. Depending on the direction of incoming waves, longshore currents in the surf-zone were separated to southeastern and northwestern flows in winter and summer respectively. The variation of observed currents near crescentic bars in the surf-zone shows different direction of longshore and cross-shore currents depending on incoming waves implying to the reason of beach erosion generating the beach cusp and sandbar migration during high waves at Anmok.

• Journal of Coastal Disaster Prevention
• /
• v.4 no.spc
• /
• pp.245-253
• /
• 2017

In this study, surface currents measured by small lagrangian GPS drifters (Aquadrifter) in Anmok coastal waters were analysed to account for the variability of nearshore surface current and wave-induced current to understand sediment transport mechanism near the crescentic bars in the surf-zone and near Kangneung breakwater and submerged breakwater in Anmok. The 8 times lagrangian drifter experiments were conducted mostly during in 2nd, 3rd, 4th intensive measurements in winter, summer, and spring seasons with long-term wave observation at the station W1. The analysed surface currents near the breakwaters in Anmok show that wave-induced currents at the middle of the submerged breakwater were separated and flowed toward the shoreline but offshore currents were dominant through the channels between the breakwaters. The longshore currents near the shoreline were flowed to the northwest (southeast) depending on the incoming waves from ENE (NNE). The surface nearshore offshore currents were generated mostly by waves and winds in case of high and low wave energy environments. Using the small-size lagrangian surface drifter experiments, we successfully measured longshore and offshore wave-induced currents in the surf-zone and near submerged breakwater close to Kangneung breakwater. The drifter experiment results show the availability of direct observation of nearshore surface currents to understand the mechanism of sediment transport analysing observed wave-induced current and ebb-current in the surf-zone generated by incoming waves and local winds.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.399-409
• /
• 2017

This study numerically investigates the characteristics of the velocity field including the average flow velocity, longshore current and turbulent kinetic energy acting as the main external forces of the salient formed behind the permeable submerged breakwaters. Shoreline response is also predicted by the longshore-induced flux. In this paper, a three-dimensional numerical wave tank based on the OLAFOAM, CFD open source code, is utilized to simulate the velocity field around permeable submerged breakwaters under the formation condition of salient. The characteristics of the velocity field around permeable submerged breakwaters with respect to the gap width between breakwaters and the installing position away from the shoreline under a range of regular waves for different wave height are evaluated. The numerical results revealed that as the gap width between breakwaters increases, the longshore currents become stronger. Furthermore, as the gap width becomes narrower, the point where flow converges moves from the center of the breakwater to the head part. As a result, it is possible to understand the formation of the salient formed behind the submerged breakwaters. In addition, it was found that the longshore currents caused by the gap width between breakwaters and the installation position away from the shoreline are closely related to the turbulent kinetic energy.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.12-23
• /
• 1995

Currents driven by irregular waves are modelled using numerical model with various empirical relations improved. Kitaigorodskii's equilibrium equation is refined to account for shoaling effect and used for checking the breaking condition. In order to compute the bottom friction realistically. equivalent roughness blights are estimated considering the ripple shape and bed load transport which may be significant the surf zone. Two sets of equations are employed to evaluate the ripple shape: one is suggested by Nielsen and the other by Madsen and Rogengaus. Both equations give similar shape of ripples. but Madsen et al. give lower value of ripple factor than Swart suggesting that the equivalent roughness becomes relatively small. Optimization technique is used to determine the proper values for the empirical parameters of $\kappa$-ι equations, and the longshore current velocity is computed using the values of empirical parameters determined by the optimization technique.