• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.110-116
• /
• 2011

Water on a road surface can lower the coefficient of friction of vehicle tires and it involves lots of risks. One way to prevent water from staying is to cut many "rain grooves" into the edges of the pavement parallel. Such grooves, however, can exert unwanted side forces, particularly on passenger tires, which cause "Groove Wander" making the drivers uncomfortable. The "Groove Wander" is somewhat related to vehicle geometry, but is more strongly related to interaction between road grooves and tire tread's longitudinal grooves. This thesis tries to examine principles to estimate "Groove Wandering" effect focusing on the design of longitudinal groove. Additionally, it studied how to reduce pipe resonance longitudinal grooves form in the contact patch.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.700-701
• /
• 2010

• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1075-1082
• /
• 2005

The characteristics of longitudinal dispersion enhancement by the flow oscillation are numerically studied according to various groove geometries in a 2-D channel in the present study. The length of expanded section l$_{1}$/h$_{1}$ is varied from 0 to 8.75. The oscillating flow condition is given at both side ends, i.e., u = Asin ($2{\pi}ft$) The non-dimensional temperatures at both side ends are set to zero. The bottom and top walls are adiabatic. The local heat sources are located at the middle of the groove wall. In order to solve the governing equations, the SIMPIER algorithm is employed. The present results indicate that maximum longitudinal thermal dispersion can be achieved when the area ratio of the expanded section to the contracted section in the grooved channel becomes 1.

• 대한수의학회지
• /
• 제31권2호
• /
• pp.171-178
• /
• 1991

Effects of catecholamines were investigated on isolated strips of the male cattle oesophageal groove. In the circular muscles of the bottom and longitudinal muscles of the lip. isometric tensions was recorded with isometric myograph in 25ml organ bath. The results were as follows: 1. The muscular activity was different in preparations from the two parts. In the longitudinal muscle from the lip, rhythmic contractions generally occurred. while in the circular muscle from the bottom they were not seen almost. 2. In the circular muscle of the bottom, the increased tone and biphasic contractions were caused by catecholamines. And these contractions were mediated through $\alpha$-excitatory adrenoceptor. Also circular muscle showed minor inhibitory response to catecholamines. And these effects were mediated through $\beta$-inhibitory adrenoceptor. But the circular muscle was more sensitive to the $\alpha$-excitatory effect than $\beta$-inhibitory effect. 3. In logitudinal muslce of the lip. rhythmic contractions were reduced or disappeared by catecholamines(especially propranolol) and these effects were mediated through $\beta$-adrenoceptor.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.425-426
• /
• 2008

Elasto-plastic finite element analysis was carried out for analyzing the severe plastic deformation behavior of copper specimens during groove pressing. Deformation localization was studied in terms of strain variations along the longitudinal direction. Plastic strain is lower at the local interface between the shear and the flat regions, which receive very little shear during the pressing cycle. Strain localization is more intensified with the number of rove pressing cycles, although the average strain level increases.

• 비파괴검사학회지
• /
• 제21권6호
• /
• pp.658-662
• /
• 2001

후방산란된 초음파의 입사각 의존성을 이용한 표면 결함유형의 평가가 시도되었다. 평탄한 유리위에 순수한 홈, 구리로 채워진 홈, 표면위 붙여진 구리선등의 표면결함 시편에 대한 후방산란 프로파일은 제 1 임계각에서 종파의 산란과 관련된 새로운 프로파일을 보여주었다. 결함에 의한 산란효과가 클수록 후방프로파일들의 정점 위치는 작게 나타났으며 후방복사 프로파일과 정점 위치에서의 파열의 모양은 결함의 유형과 위치에 따라 누수파와 산란파의 복합적 요인에 의해 다른 형태를 보여주었다.

• Journal of Welding and Joining
• /
• 제21권5호
• /
• pp.561-567
• /
• 2003

For construction of I-beam steel structures, a fillet welding is one of the main manufacturing process. However, this welding process cause some problems associated with welding residual stress and welding deformation that are harmful to the safety of structures. Accordingly, this study clarified the creation mechanism of the welding deformation on I-beam steel structure from the experimental results given by the FEM method. To prevent or minimize the longitudinal bending deformation, first of all, a field supervision is necessary to observe the optimal groove design. Secondly, the welding order for cooling weld zone is needed.

• 대한기계학회논문집A
• /
• 제37권11호
• /
• pp.1379-1386
• /
• 2013

본 논문에서는 용접부 중앙에 원주방향 관통균열이 있는 V-그루브 맞대기 용접 배관의 한계하중 해석을 수행하였다. V-그루브 맞대기 용접 배관이 그루브 각 $45^{\circ}$, $90^{\circ}$를 갖는 형상에 대한 한계하중 식을 제시하기 위해 용접 형상의 변화에 따른 용접부 너비를 정의하였고 강도불일치 비, 용접부 너비, 균열 길이 및 배관 반경 비에 대한 체계적인 변수 해석을 수행 하였다. 모재와 용접재는 탄성 완전소성재료로 가정하였으며 상불일치와 하불일치 조건에서의 인장 하중과 굽힘 하중에 대한 강도불일치 한계하중이 강도불일치 비($M_F$)와 형상변수(${\psi}$)를 통해 정량화 됨을 유한요소 해석을 통해 확인하였다.

• Journal of Welding and Joining
• /
• 제14권5호
• /
• pp.49-58
• /
• 1996

In Korea Gas Corporation, as one of the pipeline repairing methods, damaged pipelines are sometimes treated with a temporally employment of split sleeve. On conducting the repair process, circumferential fillet and longitudinal groove welding usually must be included. For the case of groove welding, a considerable amount of R&D have been carried out related to property changes, while few study on the property change in fillet welding has been conducted. In this paper, so as to confirm the specification of fillet welding in terms of safety and reliability, properties changed by fillet welding were investigated for two welding processes. Qualifying tests such as reviewing macrostructure and nick-break tests were performed according to API 1104 and ASME section IX. In addition, tensile properties and hardness were evaluated according to KS B0841 and BS 4515. The fillet weld prepared by the qualified procedure showed melting depth of 0.8∼1.3mm and heat affected zone of 2.8∼3.4mm length. No crack and lack of penetration were observed. And the results of hardness and nick-break tests satisfied code requirements. The area crossed by fillet and groove welding line was found to have minimal tensile strength.

• 대한수의학회지
• /
• 제33권4호
• /
• pp.617-622
• /
• 1993

The preliminary studies on the localization of adrenoceptors were performed on smooth muscle strips of bovine esophageal groove. The mechanical activity of the muscle strip was recorded isometrically in vitro.w In the bottom circular muscle strips. the excitatory ${\alpha}-adrenergic$ responses were not blocked by tetrodotoxin$(2.1{\times}10^{-6}M)$ and denervation which was carried by cold storage of strips for 48 hrs in Tyrode's solution at $5-6{^{\circ}C}$ without oxygen supply. These excitatory ${\alpha}-adrenergic$ responses were partially blocked by atropine. In the lip longitudinal muscle strips, the inhibitory${\beta}-adrenergic$ responses were not blocked by pretreatment of tetrodotoxin and atropine. The results suggest that ${\beta}-adrenergic$ receptors mediating relaxations are located on the postsynaptic smooth muscle cells, whereas ${\beta}-adrenergic$ receptors mediating contractions are located both in the smooth muscle cells and in the cholinergic neurones.