• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.21-38
• /
• 1999

Engineering properties of most polymers used in geosynthetics such as geogrid can be degraded by the chemical reaction (e.g., oxidization, ultraviolet rays, hydrolysis etc.), chemical and mechanical load, microorganism, and so on. In addition, polymer can be damaged by the compaction during construction, and the characteristic of tensile strength of polymer can be changed by the long-term creep effect. In this study, engineering properties of flexible geogrids which are manufactured by weaving/knitting the high-tenacity polymers such as polyester formed in a very open, grid-like configuration, coated with any one of a number of materials (e.g., PVC, latex, etc.), are investigated. Through the analysis of test results, the durability and the long-term design tensile strength of flexible geogrids are evaluated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.105-112
• /
• 1999

In recent the superior economic benefits and the convenience of installation increased the use of geosynthetics, especially geogrids with the effects of high tensile strength. In this study, various tests were conducted to determine the physical and chemical properties of geogrids which contains durability under various critical conditions, creep behavior and the stability for installation damage in fields. With analysis of test results, the partial and total safety factors were determined and presented the long term design strength of flexible geogrids.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.561-568
• /
• 2005

The factors affecting the long-term design strength of geogrid can be classified into factors on creep deformation, installation damage, temperature, chemical degradation and biological degradation. Especially, creep deformation and installation damage are considered as main factors to determine the long-term design strength of geogrid. Current practice in the design of reinforced soil is to calculate the long-term design strength of a reinforcement damaged during installation by multiplying the two partial safety factors, $RF_{ID} and RF_{CR}$. This method assumes that there is no synergy effect between installation damage and creep deformation of geogrids. Therefore, this paper describes the results of a series of experimental study, which are carried out to assess the combined effect of installation damage and creep deformation for the long-term design strength of geogrid reinforcement. The results of this study show that the tensile strength reduction factors, RF, considering combined effect between installation damage and creep deformation is less than that calculated by the current design method.

• 한국지반신소재학회논문집
• /
• 제9권4호
• /
• pp.75-84
• /
• 2010

본 연구에서는 띠형 섬유보강재의 인장특성, 크리프 변형, 내시공성 및 내구성을 평가하기 위한 일련의 장기성능 평가시험을 수행하였다. 또한 시험결과를 바탕으로 장기설계인장강도 산정을 위한 강도감소계수를 평가하였다. 먼저, 크리프 변형 특성을 평가하기 위해 단계 등온법과 시간-온도 중첩법을 이용하였으며, 크리프 감소계수는 1.6을 적용하는 것이 바람직한 것으로 평가되었다. 다음으로 입도 조정된 화강풍화토를 성토재로 사용하여 수행한 내시공성 시험 결과, 보강재의 강도특성에 영향을 미치는 원사의 손상이 거의 없는 것으로 확인되어, 장기설계인장강도에 큰 영향을 미치지 않을 것으로 분석되었다. 마지막으로 내구성 평가 결과, 내화학성, 내미생물 및 내후성을 고려한 강도감소계수는 1.1을 적용하는 것이 합리적인 것으로 평가되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.772-781
• /
• 2010

In this study, a revegetation reinforced earth retaining wall to strengthen the strength than construction and make up for the weakness; eco-friendly part, of the existing facilities is new construction method. The special attention is that Eco-Metal reinforced retaining wall is not use concret. Before test construction on the scene, the stability of Eco-Metal reinforced retaining wall was checked by an experiment with a model and numerical analysis. The result of an experiment with a model was that the loaded tensile stress 40.2KN/m was more than long-term design tensile strength 29.4KN/m at Geogrid and a safety factor of numerical analysis was 1.14.

• 한국지반신소재학회논문집
• /
• 제4권4호
• /
• pp.23-37
• /
• 2005

지오그리드의 장기설계 인장강도는 크리프 변형, 시공시 손상 및 환경적 요인(온도, 화학적 손상, 생물학적 손상)에 영향을 받는다. 특히, 크리프 변형 및 시공 시 손상이 가장 크게 영향을 미치는 요인으로서 반영된다. 보강토구조물에 대한 대부분의 현행 설계법에서는, 이들 영향요인을 각각 산정하여 이를 장기인장강도 산정에 반영하고 있다. 즉, 이러한 방법에서는 지오그리드의 시공 중 손상과 크리프 변형의 복합효과가 장기 설계인장강도 산정에 어떤 영향을 미치는 가에 대한 검토가 되어 있지 않다. 본 연구에서는 지오그리드의 시공 중 손상과 크리프 변형의 복합효과가 지오그리드의 장기인장강도 산정에 영향을 미치는 영향을 평가하기 위한 일련의 실험적 연구를 수행하였다. 다양한 지오그리드를 대상으로 성토흙 종류에 따른 현장 내시공성시험을 수행하였고, 지오그리드 원시료와 시공중 손상을 입은 시료를 대상으로한 크리프시험을 수행하였다. 연구결과 두 영향인자의 복합효과를 고려하여 산정한 지오그리드의 인장강도 감소계수가 현행 설계법에 의해 산정된 감소계수보다 작은 것으로 나타났다.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.247-258
• /
• 2008

This paper is concerned with the long-term performance of geo-textile (GT) composites in terms of creep deformation and frictional properties. Composites of PVA GT and HDPE GM were made to investigate the advanced properties of long-term performance related to waste landfill applications. The same experiments were also performed for typical polypropylene and polyester GT and compared to PVA GT/HDPE GM composites. We also develop high performance GT composites with GM by using PVA GT, which is capable of improving the frictional properties and thus enhances long-term performance of GT composites. Experimental study reveals that the friction coefficient of GT composites is relatively large compared with those of polyester and polypropylene non-woven GT as long as the friction media has similar size to the particles of domestic standard earth. In addition, the geo-composites bonded with geo-grid by a chemical process were investigated experimentally in terms of strain evaluation and creep response values. Geo-grid plays an important role as a reinforcing material. Three kinds of geo-grid were prepared as strong yarn polyester and they were woven type, non-woven type, and wrap knitted type. The sample geo-grids were then coated with PVC. The rib tensile strength tests were conducted to evaluate geo-grid products in terms of tensile strength with regard to single rib. The test was performed according to GRI-GGI. It was concluded again from the experiments that the tensile and creep strains of the geo-grid showed such stable values that the geo-grid prepared in this study could protect geo-textile partially in practical structures.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1580-1587
• /
• 2005

To calculate the long-term allowable strength of geosynthetic reinforcement, replacement method was recommended. The isochronous creep curve by S. Turner was used to define the relation between creep strain and allowable strength. In isochronous curve at given time, one can read the allowable strength at allowable creep strain. The allowable strain gets from specification by directors or manufacturers according to the allowable displacement of reinforced structures. The allowable strength can be determined in relation to the allowable horizontal displacement each structures case by case. The effect of install damage on isochronous behaviors of geosynthetic reinforcement was little. In previous study, install damage increase the creep strain slightly. And the degradation was not identified. But it is supposed that degradation increase the creep strain. In conclusion, The recommended model to determine long-term allowable strength of geosynthetic reinforcements considering tensile deformation of reinforcement and soil is fit for proper, correct and economic design for reinforced earth walls.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권1호
• /
• pp.44-54
• /
• 2012

보에 의해 지지되지 않는 RC 플랫 플레이트는 강도 조건이 아닌 사용성의 지배를 받을 수 있다. 특히, 양생 초기의 슬래브에 발생하는 과하중과 인장 균열은 시공 중 플랫 플레이트에 심각한 처짐을 발생시키며, 시공 순서와 슬래브 처짐의 영향은 플랫 플레이트에서 중요한 요소이다. 이 연구에서는 시공단계, 콘크리트의 균열 및 장기처짐 효과를 고려하여 슬래브의 처짐을 산정한다. 제안된 방법을 사용하여 플랫 플레이트의 처짐에 대한 변수연구가 실시되었다. 슬래브의 시공주기, 동바리 지지층수, 인장 및 압축철근, 콘크리트 강도, 시공 활하중, 슬래브 두께를 변수로 하여, 시공 중 즉시처짐과 시공 완료 후 장기처짐에 대하여 조사하였다. 산정 결과는 건축구조설계기준에서 제시된 사용성 제한값과 비교하였다.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.413-421
• /
• 2014

Since the structural temperature of a flight vehicle flying at high speed rises rapidly due to aerodynamic heating, it is necessary for optimum structural design to obtain proper material properties at high temperature by taking into account of its operational environment. For a special alloy, analysis data on strength change due to exposure time to high temperature are very limited, and most of them are for an exposure time longer than 30 minutes for long term operations. In this study, base and weld metal samples of Ti-6Al-4V alloy had been prepared and high temperature tensile tests with induction heating were performed, and then high temperature strength characteristics and strength recovery characteristics through cooling have been analyzed. Pre-tests to determine maximum heating rate were performed, and response characteristics for temperature control were confirmed. As a result, high temperature tensile strength appeared to be lower than that of room temperature, but it was higher than that of high temperature of 30 minite exposure listed in MMPDS. In strength recovery through cooling Ti-6Al-4V alloy has shown higher recovery rate compared with other alloys.