• Human Ecology Research
• /
• 제56권5호
• /
• pp.417-424
• /
• 2018

The use stage of a textile product impacts sustainability more significantly than other stages of the product's life cycle due to repeated washing and drying. This study determines efficient washing conditions, with high detergency, to reduce energy consumption from excessive washing and improve the washing process sustainability. Detergency was measured at various washing temperatures ($20^{\circ}C$, $40^{\circ}C$, and $60^{\circ}C$) and time (10 min, 20 min, and 30 min) using standardized soiled fabrics, i.e., 100% cotton, polyester/cotton (65%/35%), and 100% polyester woven fabric soiled with pigment/sebum, carbon black/mineral oil, soot/mineral oil, cocoa, blood, and red wine. Detergency at the washing condition of $20^{\circ}C$ and 30 min was higher than that at $40^{\circ}C$ and 10 min. In addition, detergency at the condition of $40^{\circ}C$ and 30 min was also higher than that at $60^{\circ}C$ and 10 minutes. This may be because a reduced washing effect at low washing temperatures was complemented by increased mechanical action over a long time. Further, washing temperature and time, with the same detergency, differed based on the type of fiber and soil. Also, the influence of a detergent on the detergency depends on the type of soil. The results suggest that energy and detergent have been consumed more than necessary in actual laundry. According to each type of fiber and soil, washing conditions designed to reduce the energy consumption of the washing process while maintaining the same detergency, were determined.

• International Journal of Highway Engineering
• /
• 제11권4호
• /
• pp.153-160
• /
• 2009

Falling Weight Deflectometer (FWD) tests were performed to evaluate the structural capacity of glass fiber reinforced (GFR), polymer modified (PM), and unmodified asphalt pavement in Korea-LTPP (Long Term Pavement Performance) section. FWD tests showed that the tensile strains of GFR and PM asphalt pavements at the bottom of asphalt layer were 29% and 21% less than that of unmodified asphalt pavement. The structural capacity was then used as a performance criterion for calculating the cost effect of GFR and PM asphalt pavements. From the results, 5cm of asphalt layer thickness was reduced by applying GFR asphalt, and 3cm by applying PM asphalt. However, construction cost of PM and GFR asphalt pavement were increased due to the higher GFR and PM asphalt price. Life cycle cost analysis showed that the initial construction cost of GFR and PM asphalt pavement were higher but the management and user cost were less than those of unmodified asphalt pavement.

• Journal of the Korea Society for Simulation
• /
• 제25권4호
• /
• pp.21-30
• /
• 2016

Recently manufacturing companies have used PLC control programs popularly for their automated production systems. Since the life cycle of production process is not so long, the change of the production lines occur frequently. Most of changes happen with modification of the position information and control process of the equipment. PLC control program is also modified based on the fundamental process. Therefore, to verify new PLC program by configuring virtual space according to real environment is needed. In this paper we show a logical modeling method, based on Timed-FSA useful for sequence control and dead-lock prevention. There is a problem wasting user's labor and time when defining a variety of states in a device. To overcome this problem, we propose an extended I-O model based on existing methods by adding a token concept of Petri Nets. Also we will show the usability of the extended I-O modeling through user study.

• The Journal of the Korea Contents Association
• /
• 제19권3호
• /
• pp.236-251
• /
• 2019

The animation industry is an emerging and promising industry of the 21st century, characterized by a wide range of consumer segments, high market demand, and a long life cycle of products. The paper is aimed at examining the current situation of the animation industry of Korea, the U.S., China and Japan, analyzing the success factors and presenting measures for activation of problems in China's animation industry, and contributing to the promotion of China's animation policies in the future. To realize this goal, the study methods were adopted literature review by using Internet data, statistical data, reports, papers and academic journals which are related to the Chinese animation industry and presented methods for activation. The aviations as follows, firstly, it is suggested actively train creative men of animation for profession. Secondly, it is advised to encourage the creativity and originality of Chinese animation works through various ways. Thirdly, it is suggested to develop an industry chain of animation which is suitable for the market circumstances. Fourthly, it needs to expand its viewer and strengthen its reality in the form and content of animation works.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제17권6호
• /
• pp.24-30
• /
• 2018

Dental implants are currently widely used as artificial teeth due to their good chewing performance and long life cycle. A dental implant consists of an abutment as the upper part and a fixture as the lower part. When chewing forces are repeatedly applied to a dental implant, gap at the interface surface between the abutment and the fixture is often occurred, and results in some deteriorations such as loosening of fastening screw, dental retraction and fixture fracture. To cope with such problems, a sealing-type abutment having a number of grooves along the conical-surface circumference was previously developed, and shows better sealing performance than the conventional one. This study carries out optimization of the groove shape by genetic algorithm(GA) as well as structural analysis in consideration of external chewing force and pretension between the abutment and the fixture. The overall optimization system consists of two subsystems; the one is the genetic algorithm with MATLAB, and the other is the structural analysis with ANSYS. Two subsystems transmit and receive the relevant data with each other throughout the optimization processes. The optimization result is then compared with that of the conventional one with respect to the contact pressure and the maximum stress. The result shows that the optimized model gives better sealing performance than the conventional sealing abutment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제17권1호
• /
• pp.121-126
• /
• 2019

The radionuclide inventory prediction of a nuclear power plant can help establish decommissioning plan by providing information of radiation environment. Accumulated radionuclides in reactors and related facilities after reactor shutdown can be divided into neutron activated materials and contaminated materials. Among the neutron activated radionuclides, $^{36}Cl$ and $^{41}Ca$ are important from the viewpoint of disposal because of its long half-life and physiochemical characteristics. In this research, we calculated the radionuclides of $^{36}Cl$ and $^{41}Ca$ in bioshielding concrete by estimating the neutron flux and cross section using the MCNPX. And we evaluated the inventories of $^{36}Cl$ and $^{41}Ca$ using the activation calculation code ORIGEN2.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제25권3호
• /
• pp.62-80
• /
• 2021

The requirements for the next-generation propulsion system and for a good propellant have been summarized. The characteristics and effectiveness of kerosene, hydrogen, and methane, which are the fuels that are mainly attracting attention in Korea and abroad, were compared with each other. As a result of the comparison, methane was evaluated to be more advantageous than other fuels in reliability, cost, reusability, maintenance, eco-friendliness, safety, lifespan, technical difficulties, engine cycle selection, application of common bulkhead, and non-disassembly/reassembly delivery. And in terms of performance, the specific impulse of methane is higher than that of kerosene, so the efficiency of the launch vehicle can be increased. Methane's properties incluidng eco-friendliness, low-temperature combustion, long life, and maintenability make it beneficial for reuse and for the development of multi-purpose engines.

• The Journal of Sustainable Design and Educational Environment Research
• /
• 제21권2호
• /
• pp.1-10
• /
• 2022

This study aims to prepare an objective project basis by reviewing the feasibility of reconstructing and remodeling Greensmart Future School project for S High School's main building, which was built more than 40 years ago, in Incheon Metropolitan City, and to apply and review an effective methodology for determining renovation and remodeling. To this end, the feasibility of reconstruction and remodeling was evaluated in the long term by synthesizing the results of quantitative evaluation through economic review and qualitative evaluation through educational functional review. As a result of the study, it was found that the reconstruction plan was advantageous throughout all alternatives in terms of economic costs, and the field survey indicated limitations in spatial functions to support students' various educational activities and applying new directions, especially the 2022 revised curriculum and high school credit system.

• Journal of Korea Trade
• /
• 제27권3호
• /
• pp.161-178
• /
• 2023

Purpose - purpose of this paper is to analyze the effects of the investment facilitation levels of 11 RCEP countries (excluding Myanmar, Brunei, and Laos due to lack of data) on China's outward foreign direct investments(OFDI) using balanced panel data from 2010 to 2019. Design/methodology - First, four investment facilitation measurement indicators (regulatory environment, infrastructure, financial market, ease of doing business) were selected,investment facilitation scores of the 11 countries were obtained using the principal component analysis, an investment gravity model was established with nine explanatory variables (investment facilitation level, market size, population, geographic distance, degree of opening, tax level, natural resources, whether the country is an APEC member or not, and whether a valid bilateral investment treaty with China has been concluded) were used to establish an investment gravity model, and regression analyses were conducted with OLS and system GMM. Findings - The results of the regression analyses showed that investment facilitation levels had the greatest effect on China's OFDI, all four first-level indicators had positive effects on China's OFDI, and among them, the institutional environment had the greatest effect. In addition, it was shown that explanatory variables such as market size, population, geographical distance, degree of openness, natural resources, and whether or not a valid bilateral investment treaty has been concluded would have positive effects on China's OFDI, while tax levels and APEC membership would impede China's OFDI to some extent. Originality/value - Since the Regional Comprehensive Economic Partnership (RCEPT) came into effect not long ago, there are not so many studies on the effects of investment facilitation levels of RCEP member states on China's OFDI, and the investment facilitation measurement index constructed in this paper is relatively systematic and scientific because it includes all the contents of investment facilitation related to the life cycle of company's foreign direct investments.

• Asia Marketing Journal
• /
• 제15권3호
• /
• pp.141-157
• /
• 2013

Managing customers based on customer equity (CE) has emerged as the most effective way of doing business because of its ability to foster profitable customer relationship management (CRM) through appropriate marketing activities. Most research studies provide conceptual and empirical evidence of the positive link between CE and firm performance. However, regarding this possibility, it has been suggested by some researchers that this link may not hold true for other firms with different firmographic factors, such as firm growth rate, size, and resources. As previous research emphasizes that marketing managers should implement a strategy based on their unique business environment, our study addresses this issue by extending the framework to a different industry setting to investigate the impact of CE on firm performance. We develop a model for examining the relationship between the firm's estimated CE and firm performance by each time period using a distributed lagged model. Then, we investigate the effect of CE on the firm's profitability using a regression analysis. Finally, even though CRM is in increasing demand and firms are focusing on the customer as an asset, we conclude that there is a limited condition for this positive effect of CE. When the life cycle was divided by growth rate, CE was shown to have a distinctive effect on profit. In the case of a high-growth stage, the effect of CE on profit is positive because of its potential customer base, whereas the effect is not significant in a low-growth stage. That is, when the business environment is saturated and the firms are no longer competing in the market, CRM may not be effective. In other words, a long-term performance orientation may not be as effective as previously believed. This research contributes to the previous literature, providing a counterintuitive suggestion that firm managers should be cautious about implementing a CRM strategy and should allocate resources properly in terms of their resource capabilities and ability depending on their situation.