• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.185-189
• /
• 2017

This paper proposes a low power frequency divider for an integrated CMOS phase-locked loop (PLL). An injection-locked frequency divider (ILFD) was designed, along with a current-mode logic (CML) frequency divider in order to obtain a broadband and high-frequency operation. A ring oscillator was designed to operate at 1.2 GHz, and the ILFD was used to divide the frequency of its input signal by two. The structure of the ILFD is similar to that of the ring oscillator in order to ensure the frequency alignment between the oscillator and the ILFD. The CML frequency divider was used as the second stage of the divider. The proposed frequency divider was applied in a conventional PLL design, using a 0.18 ${\mu}m$ CMOS process. Simulation shows that the proposed divide-by-two ILFD and the divide-by-eight CML frequency dividers operated as expected for an input frequency of 1.2 GHz, with a power consumption of 30 mW.

• Nuclear Engineering and Technology
• /
• 제36권2호
• /
• pp.121-126
• /
• 2004

3-PM liquid scintillation counting using the geometry-efficiency variation technique has been applied to the activity measurement of $^{204}T1$, which decays to $^{204}Hg\;and\;^{204}Pb\;by\;{\beta}^-$ and E.C., respectively. The TDCR values K have been derived over a wide range, 0.78 < K < 0.97, by displacing the detectors up to 50 mm away from an unquenched liquid scintillation sample $^{204}Tl$. The derived plots of the logic sums of double coincidences $N_D(K)$ very K vary linearly in the observed regions. The fractions of losses due to electron capture decay have been taken into account by employing a PENELOPE Monte Carlo simulation. The calibrated activity is 102.3 kBq at a reference date of July 1st, 2002 (UT) with a combined uncertainty of $0.63\%$. This is consistent with the value determined by means of the CIEMAT/NIST method at KRISS.

• 한국지능시스템학회논문지
• /
• 제17권5호
• /
• pp.626-631
• /
• 2007

인간의 계속적인 도움 없이 거칠고 변화하며 구조화되지 않은 환경에서 원하는 작업을 수행하는 자율주행 로봇은 확실하거나 불확실한 주변 환경을 극복하는 능력을 지녀야 한다. 이를 위해서는 센서로부터 얻어진 불확실한 정보를 바탕으로 유용한 결론을 도출하는 알고리즘이 요구된다. 본 논문에서는 지식의 표현 및 처리에 유용한 방법으로 주목을 받고 있는 온톨로지에 기반한 자율주행 로봇의 자율주행 알고리즘을 제안하고 이의 타당성을 컴퓨터 모의실험을 통해 보인다.

• 한국지능시스템학회논문지
• /
• 제17권5호
• /
• pp.701-706
• /
• 2007

최근 고층건물의 방진시스템 및 자동차의 현가장치 분야에 MR 유체를 이용한 반능동 진동제어에 관한 연구가 활발히 진행되면서 MR 유체의 밸브모드 특성을 이용한 선형 MR 댐퍼가 널리 사용되고 있다. 그러나 전단모드를 이용한 회전형 MR 댐퍼에 관한 연구는 초기단계에 머물고 있다. 본 연구에서는, 주행로봇의 무한회전형 액츄에이터용 회전형 댐퍼의 진동제어에 관한 연구를 수행하였으며, 퍼지 로직을 기반으로 한 회전형 MR 댐퍼용 진동제어 알고리즘을 제안하였다. 퍼지제어기의 입출력 이득과 멤버쉽 함수의 모양은 유전자 알고리즘을 이용하여 조정하였다. 시뮬레이션 결과는 MR 댐퍼에 충격력이 가해질 때 퍼지 스카이-훅 제어의 제어성능을 보여준다.

• 한국지능시스템학회논문지
• /
• 제17권5호
• /
• pp.707-711
• /
• 2007

Microarray gene expression data is believed to show the functions of living organism through the gene expression values. We have studied a method to get the informative genes from the microarray gene expression data. There are several ways for this. In recent researches to get more sophisticated and detailed results, it has used the intelligence information theory like fuzzy theory. Some methods are to add fudge factors to the significance test for more refined results. In this paper, we suggest a method to get informative genes from microarray gene expression data. We combined the difference of means between two groups and the fuzzy membership degree which reflects the variance of the gene expression data. We have called our significance test the Fuzzy Information method for Gene Expression data(FIGER). The FIGER calculates FIGER variation ratio and FIGER membership degree to show how strongly each object belongs to the each group and then it results in the significance degree of each gene. The FIGER is focused on the variation and distribution of the data set to adjust the significance level. Out simulation shows that the FIGER-test is an effective and useful significance test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.292-294
• /
• 2004

In this paper, we design the GA-fuzzy precompensator of a Power System Stabilizer for Thyristor Controlled Series Capacitor(TCSC-PSS) for enhancement of power system stability. Here a fuzzy precompensator is designed as a fuzzy logic-based precompensation approach for TCSC-PSS. This scheme is easily implemented simply by adding a fuzzy precompensator to an existing TCSC-PSS. And we optimize the fuzzy precompensator with a genetic algorithm for complements the demerit such as the difficulty of the component selection of fuzzy controller, namely, scaling factor, membership Auction and control rules. Simulation results show that the proposed control technique is superior to a conventional PSS in dynamic responses over the wide range of operating conditions and is convinced robustness and reliableness in view of structure.

• 한국정보통신학회논문지
• /
• 제11권11호
• /
• pp.2083-2089
• /
• 2007

본 논문은 초음파 센서에 의해 인식된 정보를 항체와 항원으로 모델링 된 퍼지 인공 명역망에 의한 하위 행위기와 상위 행동 선택기로 설계된 자율이동로봇 시스템에 관한 연구이다. 외부 환경과 행동 패턴의 관계는 매우 많은 조합이 가능하다. 이러한 복잡한 관계 속에서 행동의 우선 순위를 어떻게 결정하는가 하는 문제가 가장 중요하다. 이런 복잡한 결정을 위해 본 논문에서는 퍼지 인공 면역망 알고리즘을 제시하고, 컴퓨터 시뮬레이션에 의해 제안된 자율이동로봇의 행위 선택기의 유용성을 보여준다.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.905-913
• /
• 2017

Advanced reactor designs often feature longer operating cycles between refueling and new concepts of operation beyond traditional baseload electricity production. Owing to this increased complexity, traditional proportional-integral control may not be sufficient across all potential operating regimes. The prototypical advanced reactor (PAR) design features two independent reactor modules, each connected to a single dedicated steam generator that feeds a common balance of plant for electricity generation and process heat applications. In the current research, the PAR is expected to operate in a load-following manner to produce electricity to meet grid demand over a 24-hour period. Over the operational lifetime of the PAR system, primary and intermediate sodium pumps are expected to degrade in performance. The independent operation of the two reactor modules in the PAR may allow the system to continue operating under degraded pump performance by shifting the power production between reactor modules in order to meet overall load demands. This paper proposes a Takagi-Sugeno (T-S) fuzzy logic-based power distribution system. Two T-S fuzzy power distribution controllers have been designed and tested. Simulation shows that the devised T-S fuzzy controllers provide improved performance over traditional controls during daily load-following operation under different levels of pump degradation.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.716-721
• /
• 2019

불확실한 순궤환 비선형 계통에 대한 스위칭 미분기 기반의 새로운 백스테핑 제어기를 제안한다. 제안된 제어기에서는 점근적 추종 특성을 갖는 스위칭 미분기를 사용하여 백스테핑 제어기의 매 설계 단계마다 가상 제어항이 직접 근사된다. 그 결과 제어식이 매우 단순화되고 계통에 내재된 파라미터 및 구조적 불확실성과 외란이 존재함에도 불구하고 계통의 출력이 원하는 출력을 점근적으로 추종함을 증명한다. 또한 신경망이나 퍼지시스템 같은 계통의 구조적인 불확실성에 적응적으로 실시간 보상하기 위한 범용 근사기가 불필요하다. 모의실험을 통해서 제안된 제어기의 성능과 간결함을 보인다.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.281-292
• /
• 2019

This paper proposed a new technology to control a path forging parts in limited narrow space of manufacturing process automation for smart factory. In the motion control, we adapted the obstacle avoidance technology based on ultrasonic sensors. The new motion control performance test for a mobile robot is experimented in narrow space environments. The travelling path control is performed by a fuzzy control logic. which plays a role for selecting an appropriate behavior in accordance with the situation in the vicinity of the mobile robot. Ultrasonic sensors installed at the front face of the mobile robot are used. In order to update the current position and heading angle of the mobile robot, a new approch is adapted. The reliability is illustrated by simulation and experiments.