• 제목/요약/키워드: Logic Circuit

검색결과 724건 처리시간 0.027초

아두이노 장치 프로그래밍을 통한 기초 디지털 논리 회로 실습 교육 과정 (Curriculum for Basic Digital Logic Circuit Practices through Arduino Device Programming)

  • 허경
    • 실천공학교육논문지
    • /
    • 제9권1호
    • /
    • pp.41-48
    • /
    • 2017
  • 본 논문에서는 기초 디지털 논리 회로 실습 교육 과정을 설계하기 위해, 디지털 출력을 갖는 아두이노 프로그래밍을 통한 디지털 논리회로 제어 방법을 제안하였다. 디지털 논리회로와 아두이노 프로그래밍 실습은 국내 교육과정의 고등학교 및 대학교의 공학 계열 학과에서 필수 교육과정으로 지정하고 있다. 하지만 실제 실습에는 디지털 논리회로와 아두이노 프로그래밍이 결합된 예제가 부족하고, 디지털 논리회로를 설계하고 오실로스코프 보다 저가의 비용으로 실험할 수 있는 교육 과정이 부족하다. 이에 본 논문에서는 이 문제를 해결하는 디지털 출력 명령을 통한 아두이노 프로그래밍을 통해, 디지털 논리회로를 제어하고 실습해보는 한 학기 기간의 기초 디지털 논리 회로 실습 교육 과정을 제안하였다.

Redundant Multi-Valued Logic을 이용한 고속 및 저전력 CMOS Demultiplexer 설계 (Design of a High Speed and Low Power CMOS Demultiplexer Using Redundant Multi-Valued Logic)

  • 김태상;김정범
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.148-151
    • /
    • 2005
  • This paper proposes a high speed interface using redundant multi-valued logic for high speed communication ICs. This circuit is composed of encoding circuit that serial binary data are received and converted into parallel redundant multi-valued data, and decoding circuit that convert redundant multi-valued data to parallel binary data. Because of the multi-valued data conversion, this circuit makes it possible to achieve higher operating speeds than that of a conventional binary logic. Using this logic, a 1:4 demultiplexer (DEMUX, serial-parallel converter) IC was designed using a 0.35${\mu}m$ standard CMOS Process. Proposed demultiplexer is achieved an operating speed of 3Gb/s with a supply voltage of 3.3V and with power consumption of 48mW. Designed circuit is limited by maximum operating frequency of process. Therefore, this circuit is to achieve CMOS communication ICs with an operating speed greater than 3Gb/s in submicron process of high of operating frequency.

  • PDF

RSFQ 논리회로의 개발과 회로설계에 대한 지연시간 고려 (Development of RSFQ Logic Circuits and Delay Time Considerations in Circuit Design)

  • 강준희;김진영
    • Progress in Superconductivity
    • /
    • 제9권2호
    • /
    • pp.157-161
    • /
    • 2008
  • Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

  • PDF

고성능 풀 스윙 BiCMOS 논리회로의 설계 (Design of High Performance Full-Swing BiCMOS Logic Circuit)

  • 박종열;한석붕
    • 전자공학회논문지B
    • /
    • 제30B권11호
    • /
    • pp.1-10
    • /
    • 1993
  • This paper proposes a High Performance Full-Swing BiCMOS (HiF-BiCMOS) circuit which improves on the conventional BiCMOS circuit. The HiF-BiCMOS circuit has all the merits of the conventional BiCMOS circuit and can realize full-swing logic operation. Especially, the speed of full-swing logic operation is much faster than that of conventional full-swing BiCMOS circuit. And the number of transistors added in the HiF-BiCMOS for full-swing logic operation is constant regardless of the number of logic gate inputs. The HiF-BiCMOS circui has high stability to variation of environment factors such as temperature. Also, it has a preamorphized Si layer was changed into the perfect crystal Si after the RTA. Remarkable scalability for power supply voltage according to the development of VLSI technology. The power dissipation of HiF-BiCMOS is very small and hardly increases about a large fanout. Though the Spice simulation, the validity of the proposed circuit design is proved.

  • PDF

전기회로실험을 이용한 PBL기반 디지털 논리회로 교육방법 개발 및 적용 분석 (Development and Analyses of an PBL-based Digital Logic Education Program using Electrical Circuit Experiments)

  • 허경
    • 정보교육학회논문지
    • /
    • 제13권3호
    • /
    • pp.341-349
    • /
    • 2009
  • 본 논문에서는 정보 과학교육에서 디지털 시스템의 동작 원리를 이해하는데 기초가 되는 디지털 논리 회로에 대한 내용을 쉽게 이해할 수 있도록, 전기회로 실험 조작 활동을 통한 논리회로 결과 검증 방법을 제안하였다. 그리고 제안한 검증방법을 활용하고 실생활 디지털 기기 예제를 통해 PBL 기법에 기반한 논리회로의 개념교육 방법 및 부울 논리 교육 방법을 제안하고 실제 수업에 적용한 결과를 난이도 할당의 적절성 및 학생들의 문제해결력 측면에서 분석하였다.

  • PDF

기초디지털논리회로 실습을 위한 스위치 기반 LED Art 논리 회로 구현 (Implementation of a Switch-based LED Art Logic Circuit for Basic Digital Logic Circuit Practice)

  • 허경
    • 실천공학교육논문지
    • /
    • 제8권2호
    • /
    • pp.95-101
    • /
    • 2016
  • 본 논문에서는 디지털 논리회로의 동작 원리에 대한 이해를 돕기 위해, 스위치 기반 LED (Light Emitting Diode) Art 논리 회로 구현 방법을 소개한다. 브레드 보드를 이용한 디지털 논리회로 실습은 국내 교육과정의 고등학교 및 대학교 수준의 해당 학과에서 필수 교육과정으로 지정하고 있다. 하지만 실제 실습에는 기초적인 구현 예제가 부족하고, 이에 따른 결과로 복잡한 디지털 논리회로 예제를 통한 학습으로 디지털 논리회로의 기초 동작 원리에 대한 이해를 방해하는 문제점을 갖고 있다. 따라서, 스위치를 이용한 기초적인 실습예제이며, 다수의 출력 장치 신호들을 동시에 제어하는 논리회로의 필요성을 이해할 수 있는 LED Art 회로 구현 방법을 제안하고 시험하였다.

교육용 디지털 논리회로 시뮬레이터 설계 및 구현 (Design & Implementation of an Educational Digital Logic Circuit Simulator)

  • 김은주;류승필
    • 컴퓨터교육학회논문지
    • /
    • 제11권2호
    • /
    • pp.65-78
    • /
    • 2008
  • 기존의 교육용 디지털 시뮬레이터들은 논리소자(AND, OR gate 등)의 입력 포트 수, 선의 상태변화, custom component등에 대한 제한이 있다. 본 논문에서는 이러한 제한을 완화시키고, 큰 규모의 논리를 여러 개의 도면으로 나누어 처리할 수 있는 확장형 디지털 논리 회로 시뮬레이터 XSIM (eXpandable digital logic circuit SIMulator)을 제안한다. XSIM은 큰 회로를 여러 개의 페이지로 나누어 작업이 가능함으로 복잡한 논리도면 구성이나, 팀별수업에 도움이 될 것으로 기대된다.

  • PDF

저 전력 MOS 전류모드 논리 병렬 곱셈기 설계 (Design of a Low-Power MOS Current-Mode Logic Parallel Multiplier)

  • 김정범
    • 전기전자학회논문지
    • /
    • 제12권4호
    • /
    • pp.211-216
    • /
    • 2008
  • 이 논문은 MOS 전류모드 논리 (MOS current-mode logic circuit, MCML) 회로를 이용하여 저 전력 특성을 갖는 8${\times}$8 비트 병렬 곱셈기를 설계하였다. 설계한 곱셈기는 회로가 동작 하지 않을 때의 정적 전류의 소모를 최소화하기 위하여 슬립 트랜지스터 (sleep-transistor)를 이용하여 저 전력 MOS 전류모드 논리회로를 구현하였다. 설계한 곱셈기는 기존 MOS 전류모드 논리회로에 비해 대기전력소모가 1/50으로 감소하였다. 또한, 이 회로는 기존 MOS 전류모드 논리회로에 비해 전력소모에서 10.5% 감소하였으며, 전력소모와 지연시간의 곱에서 11.6%의 성능 향상이 있었다. 이 회로는 삼성 0.35${\mu}m$ 표준 CMOS 공정을 이용하여 설계하였으며, HSPICE를 통하여 검증하였다.

  • PDF

Fault detection of logic circuit by use of M-sequence correlation method

  • Miyata, Chikara;Kashiwagi, Hiroshi
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.24-29
    • /
    • 1993
  • In this paper, the estimation of the structure of a logic circuit under test is made from the observation of the input-output correlation function by use of M-sequence, from which we can estimate whether or not any fault exist in the logic circuit. Especially, investigation was made in case of the 2_stage logic circuit. We checked theoretically the sequence of correlation function, and we have shown that the correlation function is a function of period of M-sequence only, land the appearing number of correlation function in a period is a constant value depending on the logic circuit only. And by computer simulations we have shown that the structure of the circuit under test can be estimated from the observation of sequence of correlation function.

  • PDF

논리회로 설계 자동화를 위한 시뮬레이션 시스템 (A Simulation System for the Automation of Logic Circuit Design)

  • 한창호
    • 한국시뮬레이션학회논문지
    • /
    • 제3권1호
    • /
    • pp.107-114
    • /
    • 1994
  • This paper describes an integrated environment for logic circuit simultion which is an important step of logic circuit design. The system consists of a logic simulator kernel, an expandible element routine library. a functional level element routine generator, several HDL input parsers, and a postprocessor. The system can simulate the same system in several levels of hierarchy. The experimental result shows that the system is very efficient and useful for design of logic circuits.

  • PDF