• The Journal of Engineering Geology
• /
• v.24 no.2
• /
• pp.247-260
• /
• 2014

Rock masses at the site for the $2^{nd}$ step construction of the KAERI Underground Research Tunnel (KURT) are divided into six units to establish a rock mechanics model that is dependent on the geological characteristics and degree of joint development. The site primarily consists of three granitic units (G1, G2, and G3), two dykes (D1 and D3), and a fault zone of poor rock mass quality (F3). The F3 unit crosses the tunnel at the beginning of the site of $2^{nd}$ step construction. The rock masses of each unit are classified by RMR (Rock Mass Rating), Q-system, and RMi (Rock Mass Index), all based on borehole logging data. The deformation modulus, rock mass strength, cohesion, and friction angle for each unit are calculated using established empirical relationships. The representative rock mass classification and geotechnical parameters for the rock mass units are established, and a rock mechanics model for the site is proposed, which will be useful in the design and stability analysis of the $2^{nd}$ step construction of KURT.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.4
• /
• pp.207-215
• /
• 2014

Password based authentication systems are most widely used for user convenience in web services. However such authentication systems are known to be vulnerable to various attacks such as password guessing attack, dictionary attack and key logging attack. Besides, many of the web systems just provide user authentication in a one-way fashion such that web clients cannot verify the authenticity of the web server to which they set access and give passwords. Therefore, it is too difficult to protect against DNS spoofing, phishing and pharming attacks. To cope with the security threats, web system adopts several enhanced schemes utilizing one time password (OTP) or long and strong passwords including special characters. However there are still practical issues. Users are required to buy OTP devices and strong passwords are less convenient to use. Above all, one-way authentication schemes generate several vulnerabilities. To solve the problems, we propose a multi-channel, multi-factor authentication scheme by utilizing QR-Code. The proposed scheme supports both user and server authentications mutually, thereby protecting against attacks such as phishing and pharming attacks. Also, the proposed scheme makes use of a portable smart device as a OTP generator so that the system is convenient and secure against traditional password attacks.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.211-220
• /
• 2014

This study reports the formation characteristics of tar, ash and clinker due to a wood pellet grade and the performance analysis of wood pellet boiler in terms of the moisture contents change of the wood pellet. Tar was accumulated on the heating surface according to combustion of wood pellet, the ash was yielded on the floor of combustion chamber in a wood pellet boiler and the clinker was solidified at the burner due to combustion of the 3rd grade wood pellet. Especially, the moisture contents is important factor to define the grade. Wood of logging residues has a non-uniform moisture contents after the field process, yields of tar, ash and clinker are increased in case of combustion due to the high ash contents. For these reasons, emission of harmful compounds in the exhaust gas, decrease of boiler efficiency and the system operating errors are observed. In the performance analysis of wood pellet boiler in terms of the moisture contents change of the 1st grade wood pellet, the boiler efficiency was reduced by 27.08% with 6.6% moisture contents increase. The optimum moisture contents of wood pellet is needed to improve the boiler performance and efficiency.

• The Korean Journal of Quaternary Research
• /
• v.18 no.2 s.23
• /
• pp.107-107
• /
• 2004

In this paper we have introduced some results of study on stand growth pattern and stand structure of larch forest which are located in selected forest sites of Khangai and Gobi-Altai mountain ranges of Mongolia. Our investigations showed that growth intensity and stand structure in western Mongolia are very specific from the other forest vegetation zones of Mongolia. Studies on the stand structure and growth trend indicate that tree types of stand structure and different types of growth of Larix sibrica are very common in Western Mongolia. These peculiarities of stand structure and growth of larch stands in Western Monolia could be used for inventory work and an improvement of the forest management in Western Mongolian region. The larch tree is the dominant tree species in Western Mogolia. Forest cover of the region is about 15%, which is two times higher than the country's average. In this region forest area is divided into 4 forest sub-regions: the Central Khangai, Western Khangai, North Eastern Khangai and South Easterun Khangai sub-regions including taiga, pseudo taiga, sub taiga, sub-alpine and forest steppe belts. Silviculture practices and forest research management request to study forest growth trends in local and general conditions, which means to indicate a change of taxonomic characteristics of stand from time to time including diameter, height, basal area, growth stock etc. The forest management practice mostly uses tables of forest growth and yield based on the results of long term research on forest growth. Forest yield tables and other relevant forest standards of Russia are used for the forest inventory and forest management. They are not able to determine forest structure and growth peculiatities of Mongolian forests. Studies on forest resource assessment in Mongolia indicate that after logging operations and forest fires the natural regeneration of desired species such as pine and larch often does not succeed. This situation forces to take a different approach of forest management and silviculture practice depending on the stand structure and growth rate of the forest stands. According to our investigation in last years, forest growth pattern of larch forest depends mostly on stand structure, stand age and growth condition including forest soil, climate and location in different slopes. Due to improve environmental function of forest ecosystem in the region, it is needed to conduct very comprehensive study of high mountain forest ecosystem in selected sub-regions.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.5-12
• /
• 2005

Recently, geophysical prospecting methods have played very important roles in civil and environmental engineering problems. Technical advances in geophysical instruments and computer system made it possible to get underground images with very high resolution far purposes to resolve those problems. It was possible partly due to ever increasing demand for development of technologies needed to precisely detect polluted areas and prevent ground-related accidents. Based on the same demand, integrity tests of cast-in place piles draw more attention and development of accurate test procedures is required. Ultrasonic methods is one of most advanced non-destructive procedures. In the paper, a geotomography method is employed for the cast-in place pile integrity test using ultrasonic waves. The image of pile interior is scanned and scrutinized far better and more accurate decision in the cast-in place pile integrity. In this study, we firstly examined the accuracy fur tomography program with idealized synthetic models built in water tank: their position and size were changed in the tank and each case was studied. In the next stage, real concrete pile models were fabricated and images of anomaly areas inside the pile were scanned to successfully locate those areas.

• The Journal of Engineering Geology
• /
• v.21 no.3
• /
• pp.213-219
• /
• 2011

Transient/time-domain electromagnetic (TEM) soundings were carried out on reclaimed land, since the TEM sounding has good resolution of a conductive and thin overburden. The reclamation material is marine clay dredged from the seafloor, which is currently undergoing consolidation in the upper part of the dredged layer. The conductivity of the marine-origin clay is generally more than 0.3 S/m. The aim of the TEM sounding was to determine the depths of weathered and soft rocks overlain by thick and conductive overburden. The TEM responses were measured at delay times of 0.050-20.575 ms with a $30{\times}30$ m coincident loop array. Data from the TEM inversion and core logging indicate that the resistivities of the conductive overburden are less than 2 ${\Omega}$-m, while those of the weathered and soft rocks are 10-20 and 70 ${\Omega}$-m, respectively. The depth to weathered rock is 26-58 m and the depth to soft rock is 46-75 m.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.4
• /
• pp.745-756
• /
• 2020

An ICS(industrial control system) is a complex system that safely and efficiently monitors and controls industrial processes such as electric power, water treatment, transportation, automation plants and chemical plants. Because successful cyber attacks targeting ICS can lead to casualties or serious economic losses, it becomes a prime target of hacker groups sponsored by national state. Cyber campaigns such as Stuxnet, Industroyer and TRITON are real examples of successful ICS attacks, and were developed based on the deep knowledge of the target ICS. Therefore, for incident investigation of ICSs, inspectors also need knowledge of control processes and accident investigation techniques specialized for ICSs. Because there is no applicable technology, it is especially necessary to develop techniques and tools for embedded controllers located at cyber and physical boundaries. As the first step in this research, we reviewed logging capability of 4 PLC(Programmable Logic Controller)s widely used in an ICS area, and checked whether selected PLCs generate logs that can be used for digital investigation in the proposed cyber attack scenario.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.2 s.5
• /
• pp.73-83
• /
• 2002

HAZUS developed by FEMA is applied to estimation on seismic hazard in Chung-Nam Province using basic data on general building, population, and geology of well-logging. Through the investigation on historical and instrumental earthquakes in Korean Peninsula seismic hazard is estimated in Chung-Nam Province in two ways for calculation of acceleration, deterministically and probabilistically. In deterministic method seismic hazard in Chung-Nam Province is estimated by generation of the maximum event that occurs in Hongsung and has magnitude of 6.0. According to the result, Hongsung Gun, Yesan Gun, and Boryung City are the most severe in building damage. The expected number of people who need hospitalization in Hongsung Gun and Yesan Gun due to the earthquake are 1.1 and 0.4, respectively. In probabilistic(return period of 5,000 year) method seismic hazard in Chung-Nam Province is estimated. According to the result, Gongju City is the most severe in building damage. The expected number of people who need hospitalization in Gongju City and Nonsan City due to the earthquake are 0.1 and 0.15, respectively.

• The Journal of Engineering Geology
• /
• v.14 no.3 s.40
• /
• pp.301-311
• /
• 2004

This study is suggested a new dielectric tracer test method to understand geological structure of porous media and groundwater flow to use the dielectric constant which is one of electrical special quality of various geological materials. To measure their parameters, tracer material is made an ethanol mixing liquid(EML) having a same specific gravity of water. Also, soil materials are prepared a dielectric tracer test using the FDR system that could measure dielectric constant for saturated standard sand and river sand layers which have different initial porosity. To compare with their results, we discussed with the concentration variation of saline water having a saline concentration $3\%$ which is general tracer material by using the electro multi-meter system in the laboratory or field test. In two tracer experiment results, EML tracer test could confirm definitely EML concentration variation from each saturated soil layer as standard and river sands. However, tracer test of saline water $3\%$ concentration could not confirm permeating movement of water by degree of salinity change because these are settled at lower part column in a whole column area continuously. These causes are that specific gravity of saline water is heavier than water. That is, it could know that deposition of saline water is composed of lower part of soil column continuously independently of the direction of water into saturated soil material.

• The Journal of Engineering Geology
• /
• v.20 no.4
• /
• pp.381-390
• /
• 2010

This study assessed the hydrogeological characteristics of a seepage area of white leachate. The geological characteristics of the leachate were determined by a surface survey, and an electrical resistivity survey and borehole image processing system (BIPS) were applied to estimate the distribution of discontinuities, to assess the geological structure of the seepage areas. Fluctuations in groundwater level within boreholes were measured during periods of precipitation in the dry and wet seasons. The results show that electrical resistivity is lower in the seepage section than in non-seepage sections. The distribution of fracture zones and limestone cavities was inferred from the logging data and BIPS data. Variations in groundwater level and groundwater recharge, related to rainfall events, show the direct effect of rainfall events during the rainy season. We obtained a strong relationship between seepage amount and rainfall (correlation coefficients of 0.83-0.97).