• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.119-128
• /
• 1995

We report hybrid and passive mode-locking results of tilted-stripe AlGaAs semiconductor laser traveling wave amplifiers with saturable absorbers. Dependence ofthe pulse width on the mode locking frequency, the bandwidth of spectral filters, and the bias current of the laser amplifier are investigated. We generate 4 ps optical pulses by using the hybrid mode locking technique. The repetition rate and the peak power of generated pulses are 516 MHz and 170 mW, respectively. The tuning range of uor mode locked laser is 10 nm with the center wavelength of 780 nm. We also generate 2.6 ps optical pulses with peak power of 830 mW by using the passive mode locking technique.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.462-470
• /
• 2016

The locking load of a conventional manhole depends on the weight of its cover. Locking-type manhole structures with a special locking mechanism were recently developed to prevent accidents such as stolen cover, away cover from a frame. The weight of the manhole structure can be reduced under structural safety because the locking force of a locking-type manhole is greater than the weight of the cover. A light-weight manhole cover is developed in this study by using a finite element stress analysis and the design of experiments. Static stress analysis and fracture experiments are also conducted to analyze the states of the initial product. The optimum light-weight manhole cover considering manufacturing molds is developed and tested. Consequently, the weight was found to reduce by 16%. In addition, the fracture load increased by 38%.

• Clinics in Shoulder and Elbow
• /
• 제8권2호
• /
• pp.117-121
• /
• 2005

A secure slip knot is very important in the arthroscopic surgery of the shoulder joint. The new 'Hallym Slider', developed by the first author(KCN), has the properties of being a simple sliding and one-way locking knot. This technique can be performed alone without an assistant and has no accidental premature locking during the knot tying. The initial slip knot determines the adequacy of tissue approximation and consequent healing. The 'Hallym Slider' has excellent initial holding capacity, maintaining tension on soft tissue while additional half-hitches are being tied. It locks readily, it takes less time to tie than numerous square knots, and it is not as bulky as other knots. Therefore, we introduce this new sliding and one-way locking knot during the arthroscpic surgery of shoulder.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.509-510
• /
• 2006

FLL (Frequency Locked Loop) is the core block for high-speed transceiver. It incorporates a PLL for fine locking action, and a coarse controller for coarse locking action. A coarse controller compares frequencies coarsely and is applied to detected frequency difference directly. Compare to conventional FLL, frequency is applied to proposed FLL. Proposed FLL in this paper achieves only 5 cycles for coarse lock and total frequency locking time is 5 times faster than conventional FLL. Thus, proposed FLL is more useful to Ethernet transceiver application that requires high-speed data transfer than conventional FLL. Proposed FLL is based on $0.18{\mu}m$ process.

• 한국콘텐츠학회논문지
• /
• 제10권11호
• /
• pp.446-451
• /
• 2010

와류발산현상을 파악하기 위하여 스프링에 장착된 원통형 실린더의 풍동실험을 수행하였다. 실험에 사용된 스프링장착 실린더는 2 자유도 구조물로 서로 분리된 직선모드와 회전모드를 고유모드로 갖도록 설계되었다. 풍동 실험결과 locking-on 현상에 의한 각 모드의 공명현상이 관찰되었으며 관찰된 결과로부터 와류발산현상은 실린더의 변위형상과 상관관계를 갖는 것을 확인하였다. 또한 와류발산하중에는 실린더의 진폭과 진동수의 영향이 작용함을 파악하였다.

• 정보처리학회논문지D
• /
• 제8D권1호
• /
• pp.24-31
• /
• 2001

본 논문에서는 다단계 보안 데이터베이스에서 동시성 정도를 향상시키고, 보안 요구사항을 만족하는 향상된 트랜잭션 스케쥴링 프로토콜을 제안한다. 전통적인 직렬성 표기를 가진 두단계 잠금 기법을 다단계 보안 데이터베이스에 적용했다. 이타적 잠금기법은 기부라는 사상을 사용하여 트랜잭션이 더 잇아 그 객체를 요구하지 않을 때 다른 트랜잭션들이 그 객체를 로크할 수 있도록 미리 객체에 대한 로크를 해제함으로써 트랜잭션들의 대기시간을 줄이기 위해서 제안된 것이다. 확장형 이타적 잠금기법은 처음에 기부되지 않은 객체까지도 처리하는 좀 더 완화된 기법이다. 본 논문에서는 다단계 보안 데이터베이스에서 단기 트랜잭션의 기아현상을 최소화하도록 하였다. 본 프로토콜은 확장형 잠금 기법(XAL/MLS)을 기초로 하였으나, 새로운 방법인 다단계 보안 데이터베이스를 위한 양방향 기부 잠금 규약(2DL/MLS)으로 보안 여구와 동시성 제어를 동시에 만족한다. 제안된 프로토콜의 효율성은 실험의 결과로 확인되었다.

• 대한전자공학회논문지SD
• /
• 제46권2호
• /
• pp.71-77
• /
• 2009

본 논문에서는 다중 전하펌프를 이용하여 빠른 위상고정 시간을 갖는 새로운 위상고정루프를 제안하였다. 제안된 위상고정 루프는 세 개의 전하펌프를 사용하여 루프필터의 실효 커패시턴스와 저항을 위상고정 상태에 따라 각 전하펌프의 전류량 크기와 방향 제어를 통해 증감시킬 수 있다. 위상고정루프의 위상고정 상태에 따라 루프 대역폭을 제어하여 빠른 위상고정 시간을 갖는 위상고정루프를 설계하였다. 또한 전체 칩 영역의 많은 부분을 차지하는 커패시터의 크기를 제안된 구조로 최소화하였다. 저항과 커패시터를 모두 포함한 29.9KHz의 대역폭의 위상고정루프를 $990{\mu}m\;{\times}\;670{\mu}m$ 크기로 설계하였다. 제안된 위상고정 루프는 3.3V $0.35{\mu}m$ CMOS 공정을 이용하여 제작되었다. 851.2MHz 출력 주파수에서 측정된 위상 잡음은 -90.45 dBc/Hz@1MHz이며, 위상고정시간은 $6{\mu}s$ 보다 작은 값을 가진다.

• Structural Engineering and Mechanics
• /
• 제50권2호
• /
• pp.181-199
• /
• 2014

Locking phenomenon is a mesh problem and can be staved off with mesh refinement. If the studier is not preferred going to the solution with increasing mesh size or the computer memory can stack over flow than using higher order plate finite element or using integration techniques is a solution for this problem. The purpose of this paper is to show the shear locking phenomenon can be avoided by increase low order finite element mesh size of the plates and to study shear locking-free analysis of thick plates using Mindlin's theory by using higher order displacement shape function and to determine the effects of various parameters such as the thickness/span ratio, mesh size on the linear responses of thick plates subjected to uniformly distributed loads. A computer program using finite element method is coded in C++ to analyze the plates clamped or simply supported along all four edges. In the analysis, 4-, 8- and 17-noded quadrilateral finite elements are used. It is concluded that 17-noded finite element converges to exact results much faster than 8-noded finite element, and that it is better to use 17-noded finite element for shear-locking free analysis of plates.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.135-139
• /
• 2016

I propose a vector passive harmonic mode-locked fiber laser based on topological insulator Bi2Se3 interacting with a fiber taper with a diameter of 7 μm. The particles of topological insulator are deposited uniformly onto the fiber taper with light pressure effect. By incorporating the fabricated saturable absorber into an Er-doped fiber laser cavity, stable mode-locked fiber is obtained. Due to the intense evanescent field of the fiber taper, strong confinement of light enhances the nonlinearity of the laser cavity, and passive harmonic mode-locking is performed. I observe a maximum harmonic mode-locking of 356th, corresponding to a frequency of 3.57 GHz. The pulse duration is 824 fs, and the full width at half maximum of the spectrum is about 8.2 nm. The polarization dependent loss of the saturable absorber is ~ 2.5 dB in the wavelength range of the C band. As the cavity contains no other polarization dependent device, the mode-locked laser is functioning in the vector state. The harmonic order vs pump power is investigated. To the best of our knowledge, this report is the highest frequency mode-locked fiber laser based on Bi2Se3. Experimental results indicate that the topological insulator Bi2Se3 functioning with a thin fiber taper is effective for vector harmonic mode-locking.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4477-4490
• /
• 2023

Fuel locking mechanisms (FLMs) are essential in upward-flow research reactors to prevent accidental fuel separation from the core during reactor operation. This study presents a novel design concept for a remotely controlled plate-type nuclear fuel locking mechanism. By employing electromagnetic field analysis, we optimized the design of the electromagnet for fuel unlocking, allowing the FLM to adapt to various research reactor core designs, minimizing installation space, and reducing maintenance efforts. Computational flow analysis quantified the drag acting on the fuel assembly caused by coolant upflow. Subsequently, we performed finite element analysis and evaluated the structural integrity of the FLM based on the ASME boiler and pressure vessel (B&PV) code, considering design loads such as dead weight and flow drag. Our findings confirm that the new FLM design provides sufficient margins to withstand the specified loads. We fabricated a prototype comprising the driving part, a simplified moving part, and a dummy fuel assembly. Through basic operational tests on the assembled components, we verified that the manufactured products meet the performance requirements. This remote-controlled micro locking mechanism holds promise in enhancing the safety and efficiency of plate-type nuclear fuel operation in upflow research reactors.