• 제목/요약/키워드: Lock-in amplifier

검색결과 77건 처리시간 0.035초

미끄럼 방지 제동장치용 솔레노이드 밸브의 모델링에 관한 연구 (A Study on the Modeling of Solenoid Valve for Anti - lock Brake System)

  • 송창섭;양해정
    • 한국정밀공학회지
    • /
    • 제12권12호
    • /
    • pp.81-90
    • /
    • 1995
  • Anti-lock Brake System has been developed to reduce tendency for wheel lock and improve vehicle control during sudden braking on slippery road surfaces. This is achieved by controlling the braking pressure avoiding wheel lock, while retaining handling and brake performance. This paper is concerned about characteristics of a solenoid valve in hydraulic modulator for controlling brake pressure. First, it was modeling the electromagnet by the permeance method. Second, it was modeling the commercial Maxwell poackage program. And then, a experiment was performed in order to justify modeling. The result of modeling coincided with teh result of experiment and commercial packabe program. As a result, these modelings will be able to use in analysis of dynamic character- istics of the solenoid valve for braking.

  • PDF

전기화학적 전력 기기의 모델링을 위한 저가의 임피던스 분광 시스템의 개발 (Development of the Low Cost Impedance Spectroscopy System for Modeling the Electrochemical Power Sources)

  • 이주형;최우진
    • 전력전자학회논문지
    • /
    • 제13권1호
    • /
    • pp.46-54
    • /
    • 2008
  • 본 논문에서는 연료전지나 배터리 및 슈퍼커패시터 등의 전기화학적 전력기기의 임피던스 모델링에 적합한 저가의 임피던스 분광 시스템을 설계하고 구현하였다. 제안된 시스템은 간단한 센서회로 및 상용 DAQ(Data Acquisition) Board와 강력한 HMI(Human-Machine Interface)를 지원하는 그래픽 언어인 LabVIEW 소프트웨어를 이용하여 구성되었고 고가의 EIS(Electrochemical Impedance Spectroscopy) 장비를 대체하여 널리 사용될 수 있을 것으로 기대된다. 또한, 제안된 시스템에서는 Lock-in Amplifier를 이용함으로써 노이즈(Noise)가 많은 환경에서도 측정 주파수 성분의 정확한 측정이 가능하게 하였다. 제안된 시스템을 이용하여 Ballard Nexa 1.2kW PEM 연료전지 스택의 주파수별 임피던스를 측정하였고, 이를 바탕으로 한 등가 임피던스 모델도 제안된다. 제시된 모델과 개발된 장비의 유용함은 리플전류에 의한 연료전지 스택의 교류 손실 측정을 통해 증명된다.

금속에서의 광음향 신호 분석 (An Analysis of The Photoacoustic Signal in Metals)

  • 이종호;전계석
    • 한국음향학회지
    • /
    • 제13권6호
    • /
    • pp.24-30
    • /
    • 1994
  • 본 논문에서는 금속에서의 광음향신호를 분석하기 위해 CW $CO_{2}$ 레이저를 사용하여 광음향 신호검출 시스템을 구성하였으며 알루미늄, 탄소강 및 활동을 샘플로 선택하고 레이저 변조주파수, 록인앰프의 시정수를 변화시키면서 샘플의 종류 및 두께에 따른 수 nA정도의 광음향 신호를 검출하여 신호처리 기법에 의해 금속에서의 광음향 신호의 특성을 분석하였다. 실험결과 시정수를 조정하여 광음향 신호를 안정화시킬 수 있었고 광음향 신호는 금속고유의 열팽창계수에 대한 열용량에 비례하여 증가하고 샘플두께 및 변조주파수에 대하여 지수함수적으로 감소함을 확인하였다.

  • PDF

FOG를 이용한 디지털 진북추종 방식 (Digital North Finding Method based on Fiber Optic Gyroscope)

  • 김성진
    • 한국정보통신학회논문지
    • /
    • 제9권6호
    • /
    • pp.1356-1363
    • /
    • 2005
  • FOG(fiber optic gyroscope :광섬유 자이로스코프)는 소형 경량화, 신속한 가동, 저 전력 소모 및 저렴한 가격으로 실현 가능하므로 자이로콤파스시스템에서의 선호도가 높아지고 있다. 본 논문에서는 FOG를 기반으로 하며, 자이로콤파스시스템에 적용할 수 있는 디지털 진북추종 방식을 제안한다. FOG의 earth signal의 해석모델을 분석하고, lock-in증폭기를 통과한 earth signal을 모델링 한다. 두 개의 lock-in증폭기 출력신호를 이용한 진북추종 알고리즘을 개발하고, 이 알고리즘에 의한 디지털 진북추종 방식을 제안한다. 제안한 방식의 성능을 증명하기 위해 컴퓨터시뮬레이션 결과를 포함한다.

계통연계 인버터를 위한 디지털 록인 앰프 기반의 새로운 고조파 보상법 (A Novel Digital Lock-In Amplifier Based Harmonics Compensation Method for the Grid Connected Inverter Systems)

  • 사기르 아민;무하마드 노만 아슈라프;최우진
    • 전력전자학회논문지
    • /
    • 제25권5호
    • /
    • pp.358-368
    • /
    • 2020
  • Grid-connected inverters (GCIs) based on renewable energy sources play an important role in enhancing the sustainability of a society. Harmonic standards, such as IEEE 519 and P1547, which require the total harmonic distortion (THD) of the output current to be less than 5%, should be satisfied when GCIs are connected to a grid. However, achieving a current THD of less than 5% is difficult for GCIs with an output filter under a distorted grid condition. In this study, a novel harmonic compensation method that uses a digital lock-in amplifier (DLA) is proposed to eliminate harmonics effectively at the output of GCIs. Accurate information regarding harmonics can be obtained due to the outstanding performance of DLA, and such information is used to eliminate harmonics with a simple proportional-integral controller in a feedforward manner. The validity of the proposed method is verified through experiments with a 5 kW single-phase GCI connected to a real grid.

푸리에 변환을 이용한 전기화학적 임피던스 측정 시스템 제작 (Construction of the Electrochemical Impedance Measurement System Using Fourier Transform)

  • 황의진;오상협
    • 대한화학회지
    • /
    • 제35권6호
    • /
    • pp.713-719
    • /
    • 1991
  • 푸리에 변환을 이용하여 100kHz의 주파수 범위까지 사용할 수 있는 전기화학적 임피던스 측정시스템을 제작하였다. 이 시스템은 신호 발생기, 특수하게 고안된 정전위기, 고속 자료수집 장치, 시스템 제어기 및 컴퓨터 인터페이스로 구성되었다. 우리가 제작한 시스템은 lock-in amplifier를 사용하는 상품과 성능이 비슷하였다. 측정에 소요되는 최소 시간은 사용된 최적 주파수의 한 주기에 해당하므로 상당히 짧아졌다. 이 시스템을 사용하면 부식 초기와 같이 시간에 따라 변하는 전기화학적 계면현상을 임피던스 측정법으로 연구할 수 있으리라 전망된다.

  • PDF

Lock-in 증폭기를 채용한 주파수영역 확산 광단층촬영 시스템 (Frequency-domain Diffuse Optical Tomography System Adopting Lock-in Amplifier)

  • 전영식;백운식
    • 한국광학회지
    • /
    • 제22권3호
    • /
    • pp.134-140
    • /
    • 2011
  • 본 논문에서는 생체 내부를 비침습적으로 영상화하기 위한 방법으로 생체내에서의 빛의 전파가 흡수보다는 산란이 지배적으로 작용하는 근적외선(NIR, near-infrared) 영역의 레이저 광원 및 광 검출기를 이용하여 주파수영역(frequency-domain) 확산 광 단층촬영(DOT, diffuse optical tomography) 시스템을 구현하였으며, 생체조직을 모사한 액체 팬텀에 광학적 특성이 다른 이형성분(anomaly)을 삽입하여 실험적으로 흡수 및 산란 분포에 대한 영상을 복원함으로써 이형성분의 위치와 형태에 대한 정보를 획득하였다.

FLL을 이용하여 Lock을 가속시킨 PLL의 최적 설계에 관한 연구 (A Study on the Optimum Design of Fast-Lock PLL using FLL)

  • 강경;박윤식;박재범;우영신;성만영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
    • /
    • pp.1132-1135
    • /
    • 2002
  • In this paper, we propose a phase-locked loop (PLL) with dual loops in which advantages of both loops can be combined. Frequency-locked loop (FLL) which is composed of two frequency-to-voltage converters (FVC) and an amplifier makes the frequency synchronize very fast and output signal is synchronized in phase with the input reference signal by charge pump PLL. This structure can improve the trade-off between acquisition behavior and locked behavior.

  • PDF

기능성 원자간력 현미경 캔틸레버를 이용한 표면 전위 측정 (Surface potential mapping using a functional AFEM cantilever)

  • 서문석;이철승;이경일;신진국
    • 정보저장시스템학회:학술대회논문집
    • /
    • 정보저장시스템학회 2005년도 추계학술대회 논문집
    • /
    • pp.53-55
    • /
    • 2005
  • The surface potential variations are measured, according to the enhanced measuring speed and voltage sensitivity, using an active device, such as a field effect transistor $(FET)^{1-3}$. In this study, the surface potential was mapped in the patterned $SiO_2$ medium at room temperature. An improved FET-tip cantilever, which has a source, a drain, and an n- channel, was used in this study. The potential images were analyzed both in the contact mode and the non-contact mode, using only a pre-amplifier system instead of a lock-in the amplifier.

  • PDF