• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.3
• /
• pp.311-318
• /
• 2017

Several types of attachments have been used for implant supported and/or retained overdentures. Locator is one of the stud type attachments and it has been generally used. However, the colored matrix is resilient and vulnerable to wear, so frequent post-insertion maintenance is needed. To solve this problem, it is necessary to introduce innovative attachment system. Overdentures using Air Gap attachment (AGA) has improved masticatory function and facial esthetics. AGA is made of metal, so it could be more resistant to wear or friction than the other resilient attachments. Nevertheless, AGA plays a role in stress breakers because it allows movement during denture movement with predetermined gap. In addition, both pre-existing implants and natural teeth were successfully used for connection of AGA. AGA could replace other unsplinted type of attachments. Overdentures using AGA could provide satisfactory result in terms of function, esthetics and retention. However, long term follow up is needed.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.196-213
• /
• 2016

System Architecture Evolution (SAE) with Long Term Evolution (LTE) has been used as the key technology for the next generation mobile networks. To support mobility in the LTE/SAE-based mobile networks, the Proxy Mobile IPv6 (PMIP), in which the Mobile Access Gateway (MAG) of the PMIP is deployed at the Serving Gateway (S-GW) of LTE/SAE and the Local Mobility Anchor (LMA) of PMIP is employed at the PDN Gateway (P-GW) of LTE/SAE, is being considered. In the meantime, the Host Identity Protocol (HIP) and the Locator Identifier Separation Protocol (LISP) have recently been proposed with the identifier-locator separation principle, and they can be used for mobility management over the global-scale networks. In this paper, we discuss how to provide the inter-domain mobility management over PMIP-based LTE/SAE networks by investigating three possible scenarios: mobile IP with PMIP (denoted by MIP-PMIP-LTE/SAE), HIP with PMIP (denoted by HIP-PMIP-LTE/SAE), and LISP with PMIP (denoted by LISP-PMIP-LTE/SAE). For performance analysis of the candidate inter-domain mobility management schemes, we analyzed the traffic overhead at a central agent and the total transmission delay required for control and data packet delivery. From the numerical results, we can see that HIP-PMIP-LTE/SAE and LISP-PMIP-LTE/SAE are preferred to MIP-PMIP-LTE/SAE in terms of traffic overhead; whereas, LISP-PMIP-LTE/SAE is preferred to HIP-PMIP-LTE/SAE and MIP-PMIP-LTE/SAE in the viewpoint of total transmission delay.

• Journal of the Korean Society for Library and Information Science
• /
• v.40 no.2
• /
• pp.281-297
• /
• 2006

Government Information Locator Service(GILS) allows the users to access and utilize government information by including the content description about the resource as well as the secondary information about the resources such as location and access method. The following problems have been identified, while analyzing the electronic government offered GILS to come up with the service improvement plan. Firstly, it was difficult to comprehend the record labels from the user interface point of view. There were errors in the retrieval result screens. Secondly, there were a number of missing items in the records. Thirdly, there was no explicit explanation on how to access the information. Lastly, there were no clearly explained reasons that certain information is non-disclosed or partially disclosed. Thus, it is necessary to deal with the identified problems by improving the information collection method; reorganizing the record items; heavily investing in the public relation activities; and improving the web-based access method if the revitalization of GILS is to be achieved.

• Journal of The Korean Astronomical Society
• /
• v.38 no.4
• /
• pp.437-443
• /
• 2005

The Solar Radio Burst Locator (SRBL) is a spectrometer that can observe solar microwave bursts over a wide band (0.1-18 GHz) as well as detect the burst locations without interferometry or mechanical scanning. Its prototype has been operated at Owens Valley Radio Observatory (OVRO) since 1998. In this study, we have evaluated the capability of the SRBL system in flux and radio burst location measurements. For this, we consider 130 microwave bursts from 2000 to 2002. The SRBL radio fluxes of 53 events were compared with the fluxes from USAF/RSTN and the burst locations of 25 events were compared with the optical flare locations. From this study, we found: (1) there is a relatively good correlation (r = 0.9) between SRBL flux and RSTN flux; (2) the mean location error is about 8.4 arcmin and the location error (4.7 arcmin) of single source events is much smaller than that (14.9 arcmin) of multiple source events; (3) the minimum location error usually occurred just after the starting time of burst, mostly within 10 seconds; (4) there is a possible anti-correlation (r = -0.4) between the pointing error of SRBL antenna and the location error. The anti-correlation becomes more evident (r=-0.9) for 6 strong single source events associated with X-class flares. Our results show that the flux measurement of SRBL is consistent with that of RSTN, and the mean location error of SRBL is estimated to be about 5 arcmin for single source events.

• The Journal of the Korean dental association
• /
• v.55 no.7
• /
• pp.457-466
• /
• 2017

In the case of failed fixed implant prosthesis accompanied by abutment screw fracture, fractured screw fragment must be removed to use the existing implant fixtures. A 61-year-old male patient, who had a failed maxillary fixed implant prosthesis accompanied by three abutment screw fracture, hoped to reconstruct the maxillary implant prosthesis, while maintaining the existing implant fixtures. To use the existing implant fixtures, fractured screw fragments were removed. A maxillary implant overdenture using available existing implants was planned. Bar-attachment with Locator was used for implant splinting, denture stability, and retention. Final impression was taken after treatment of peri-implantitis. Jaw relation registration was taken to evaluate available interarch space for bar-attachment. After fabricating bar-attachment, centric relation was taken. Implant overdenture using bar-attachment with Locator was delivered after wax-denture evaluation. This case report showed that a satisfactory clinical result was achieved by implant overdenture using existing implant fixtures in a maxillary edentulous patient.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.1
• /
• pp.21-29
• /
• 2016

This in vitro study investigated and compared the durability and retention of three types of attachments. MATERIALS AND METHODS. Three commercially available attachments were investigated: $Clix^{(R)}$, Dalbo-$Plus^{(R)}$ and $Locator^{(R)}$. In total, 72 samples of these attachments were placed in the acrylic resin forms and subjected to mechanical testing (5400 cycles of insertion and removal) over the respective ball or Locator abutments immersed in artificial saliva at pH 7 and $37^{\circ}C$. The abutments were placed at angulations of $0^{\circ}$, $10^{\circ}$ and $20^{\circ}$. The retention force was recorded at the beginning and after 540, 1080, 2160, 3240, 4320 and 5400 insertion-removal cycles. RESULTS. The results revealed that there were significant differences in the average values of the insertion/removal force due to angulation ($F_{(2.48)}=343619$, P<.05) and the type of attachment ($F_{(7.48)}=23.220$, P<.05). CONCLUSION. Greater angulation of the abutments was found to influence the retention capacity of the attachments, and the fatigue test simulating 5 years of denture insertion and removal did not produce wear in the metal abutments.

• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.113-122
• /
• 2015

Objectives: The aim of this paper was evaluating the ratios of electrical impedance measurements reported in previous studies through a correlation analysis in order to explicit it as the contributing factor to the accuracy of electronic apex locator (EAL). Materials and Methods: The literature regarding electrical property measurements of EALs was screened using Medline and Embase. All data acquired were plotted to identify correlations between impedance and log-scaled frequency. The accuracy of the impedance ratio method used to detect the apical constriction (APC) in most EALs was evaluated using linear ramp function fitting. Changes of impedance ratios for various frequencies were evaluated for a variety of file positions. Results: Among the ten papers selected in the search process, the first-order equations between log-scaled frequency and impedance were in the negative direction. When the model for the ratios was assumed to be a linear ramp function, the ratio values decreased if the file went deeper and the average ratio values of the left and right horizontal zones were significantly different in 8 out of 9 studies. The APC was located within the interval of linear relation between the left and right horizontal zones of the linear ramp model. Conclusions: Using the ratio method, the APC was located within a linear interval. Therefore, using the impedance ratio between electrical impedance measurements at different frequencies was a robust method for detection of the APC.

• Restorative Dentistry and Endodontics
• /
• v.37 no.2
• /
• pp.68-73
• /
• 2012

Objectives: The purpose of this study was to assess the accuracy of Root ZX (J. Morita Corp.) according to the location of major foramen and open apex. Materials and Methods: 81 mandibular premolars with mature apices were selected. After access preparation, 27 teeth were instrumented to simulate open apices. 54 teeth were classified according to location of major foramen under surgical microscope (${\times}16$). The file was fixed at the location of apical constriction by Root ZX using glass ionomer cement .The apical 4 mm of the apex was exposed and photo was taken and the distance from file tip to the major foramen was measured by calibrating metal ruler on graph paper. The results were statistically analyzed using ANOVA and Scheffe test at p < 0.05 level. Results: Mean distance from file tip to major foramen was 0.308 mm in Tip foramen group (I), 0.519 mm in Lateral foramen group (II) and 0.932 mm in open apex group (III). Root ZX located apical constriction accurately within ${\pm}0.5mm$ in group I of 85.71%, in group II of 59.09%, and in group III of 33.33%. There was a statistically significant difference between group I and III (p < 0.05). Conclusion: Root ZX located apical constriction accurately regardless of location of major foramen. However, Root ZX couldn't find it in open apex. Clinicians have to use a combination of methods to determine an appropriate working length at open apex. It may be more successful than relying on just electronic apex locator.

• Journal of Convergence for Information Technology
• /
• v.9 no.4
• /
• pp.14-20
• /
• 2019

The purpose of this paper is to present a smart QR code recording system and a method of non­storage data delivery that transforms the original data into a form of URL information by encrypting it and encoding the URL information into a QR code so that the QR code can be written and decrypted in a medium without storing the original data. The method of the study was presented by the prior art study and the literature research. Analysis results show that the system is built on the online administration server. The data input signal matching secret code is stored in DB, the QR code generation command converts input data from the password DB to the password information combined into the subordinate locator of the admin server's domain name, URL code. Therefore, the smart QR method of data management (recording and providing) indicates that there are no limitations in the ease and space of use or obstacles to capacity use.

• Journal of Korean Dental Science
• /
• v.13 no.2
• /
• pp.52-58
• /
• 2020

Purpose: Using two types of electronic apex locators, this study aimed to investigate the differences in accuracy according to the evaluator and equipment. Materials and Methods: Artificial teeth of the lower first premolars and two mandibular acrylic models (A and B) were used in this study. In the artificial teeth, the pulp chamber was opened and the access cavity was prepared. Using calibrated digital Vernier calipers, the distance from the top of the cavity and the root apex was measured to assess the actual distance between two artificial teeth. The evaluation was conducted by 20 dentists, and each evaluator repeated measurements for each electronic apex locator five times. The difference between the actual distance from the top of the cavity to the root apex and the distance measured using electronic measuring equipment was compared. For statistical analysis, the Friedman test the Mann-Whitney U-test were conducted and the differences between groups were analyzed (α=0.05). Result: As for the accuracy of measurement according to the two types of electronic apex locators, the value of the measurement error was 0.4753 mm in Dentaport ZX and 0.3321 mm in E-Cube Plus. Moreover, electronic apex locators Dentaport ZX and E-Cube Plus showed statistically significant differences (P<0.05). As for the difference in the accuracy of the two types of electronic apex locators according to the evaluator, the resulting values differed depending on the evaluator and showed a statistically significant difference (P<0.001). Conclusion: Electronic apex locator E-Cube Plus showed higher accuracy than did Dentaport ZX. Nevertheless, both types of electronic apex locators showed 100% accuracy in finding the region within root apex ±0.5 mm zone. Furthermore, according to the evaluator, the two electronic apex locators showed different resulting values.