• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.171-178
• /
• 2002

An effect is made in this study to deepen understanding of small punch(SP) creep testing which has been a round for about 10 years as a substitute for the conventional uniaxial creep testing. Even though considerable numbers of SP creep test program have been performed, most of the tests were aimed at measuring creep rupture lives only. Very flew studies showed interest on the meaning of what we were really measuring during the SP creep tests. In this paper meanings of the parameters measured during the SP creep testing, such as punch load and punch displacement rate are investigated using finite element analysis. It was shown that the measured parameters must represent the stress and strain rates of the material at the annular region located at about 0.65 mm from the center of the SP specimen. The material in this location would go through constant maximum stress and strain rate during the testing. Experimental verification is also discussed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.123-124
• /
• 2016

본 연구는 스마트폰 사용자가 응급상황에 처했을 때 사용자의 정확한 위치 정보를 응급 구조 센터에 전달할 수 있는 방법을 개발함에 목적을 둔다. 사고의 경우 실외 뿐만 아니라 실내에서 많은 사고가 발생하는데, 일반적으로 위치 정보를 획득에 사용되는 GPS 의 경우는 실내 위치를 정확하게 파악하기 어렵기 때문에 구조를 지연시키는 문제를 야기한다. 본 연구는 이러한 상황들을 방지하기 위해 GPS와 와이파이, 블루투스를 각각 이용한 삼각 측량법을 통해 실내의 위치정보를 측정하고 더 나아가 압력센서를 통해 사용자의 위치를 3차원적으로도 탐색한다. 실험 결과, GPS를 이용하는 것보다 블루투스를 이용하는 것이 더 정확한 실내 정보를 탐색하는 것을 알 수 있었다. 또한 압력계를 통해 고도를 측정함으로써 건물 내부에서 사용자의 수직적 위치를 측정할 수 있었다. 이러한 결과는 위도 경도의 정확한 정보와 함께 고도에 대한 예측을 가능하게 함으로써 보다 정확한 실내 위치 정보를 획득하여 골든 타임을 확보하는데 도움이 될 것으로 보인다.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.2
• /
• pp.68-74
• /
• 2015

Time domain response analysis for vibro-impact nonlinear behavior of multi-span tube with loose supports was performed using commercial FEA code and user subroutine. Support geometry of multi-span tube with a finite gap is realistically modeled by analytical rigid surface. Model of hydrodynamic force is based on the Qusai-steady model which accounts for the inclined angle of relative flow velocity and time delay between flow force and resulting tube motion. During tube vibration from flow loading, impact and friction at the support location is simulated using commercial FEA code with master slave contact algorithm. Analysis results has reasonable agreement with those of references and test experience. Plan of further refinement of analysis model and future test verification is briefly introduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.352-354
• /
• 2016

Recent with the progress of smart devices, there is an increasing demand for indoor location-based services. For this reason, research on indoor positioning system using a iBeacon techniques added to BLE(Bluetooth Low Energy) specifications of Bluetooth4.0 has been actively. However, RSSI signal used for the measurement of the distance between the iBeacon and the receiving terminal has the problems of inaccurate distance measurement to environmental factors such as obstacles. In this paper, we propose an implemented indoor positioning technique to use filtering technology enhance the reliability of the RSSI signal and the broadcasting signal of the terminal access point function.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.9-15
• /
• 2011

In order to develop a practical postprocessor for 5-axis machining, the general equations of numerically controlled (NC) data for 5-axis configurations with not only non-orthogonal rotary axes but also orthogonal rotary axes were exactly expressed by the inverse kinematics, and a Windows-based postprocessor written in Visual Basic was developed according to the proposed algorithm. The developed postprocessor is a general system that suitable for all kinds of 5-axis machine tool with orthogonal and non-orthogonal rotary axes. Through implementation of the developed postprocessor and verification by a cutting simulation and machining experiment, the effectiveness of the proposed algorithm is confirmed. Compatibility is improved by allowing exchange of data formats such as rotational tool center position (RTCP) controlled NC data, vector post NC data, and program object file (POF) cutter location (CL)data, and convenience is increased by adding the function of work-piece origin offset. Consequently, the technology of practical post-processor for 5-axis machining is developed.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1852-1863
• /
• 2018

Direct current(DC) systems have recently attracted attention due to the increase in DC loads and distributed generations, such as renewable energy sources. Among these technologies, there has been much research into DC distribution systems or DC microgrids. Within this body of research, the main topics have been about optimum control and operation methods in terms of improving power efficiency. When DC systems are controlled and operated using power electronic devices such as converters, it is necessary to design and analyze them by considering the power electronics sections. For this reason, we propose a scalable DC system analysis algorithm, which considers various system configurations depending on the operating mode and location of the converter. The algorithm consists of power flow fault current calculations, and the results of the algorithm can be used for designing DC systems. The algorithm is implemented using MATLAB with defined input and output data. The verification of the algorithm is mainly performed using ETAP software, and the accuracy of the algorithm analysis can be confirmed through the results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1537-1542
• /
• 2007

In this study, based on a I-roll embedded steel composite deck, it is suggested a new type of simplified composite deck and analyzed under construction loading. Using ABAQUS, it's estimated effects of welding amount of steel plate and I-section, existence of a hole of I-section's flange, and a location of hole. For a reasonable verification of modeling, compare Euler-Beam theory with F.E.M models. In result, it is verified that change of welding amount increase more maximum bending tension stresses at the central part's section of span when elements are partial-welded. Also, verify that deflection is slightly increased when a hole existed compared with no hole.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.138-140
• /
• 2003

The aim of this study is to evaluate the effect of spatial resolutions on the accuracy to landslide susceptibility mapping. For this, landslide locations were identified in the Boun, Korea from interpretation of aerial photographs and field surveys. The topographic, soil, forest, geologic, linearment and land use data were collected, processed and constructed into a spatial database using GIS and remote sensing data. The 15 factors that influence landslide occurrence were extracted and calculated from the spatial database with 5m, 10m, 30m, 100m and 200m spatial resolutions. Landslide hazardous area were analysed and mapped using the landslide-occurrence factors by probability model, likelihood ratio, for the five cases spatial resolutions. The results of the analysis were verified using the landslide location data. In the cases of spatial resolution 5m, 10m and 30m, the verification results was similar, but in the cases of 100m and 200m the results worse than the others. Because the scale of input data was 1:5,000 ? 1:50,000, so the cases of 5m, 10m and 30m have similar accuracy but the cases of 100m and 200m have the lower accuracy. From this, there is an effect of spatial resolutions on accuracy and landslide susceptibility mapping the result is dependent on input map.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.2
• /
• pp.91-101
• /
• 2017

Quantitative forecasting methods based on spatial data and geographic information system have been used in predicting the landslide location. This study compared the simulated results of logistic, Bayesian, and maximum entropy models to understand the uncertainties of each model and identify the main factors that influence landslide. The study area is Boeun gun where 388 landslides occurred in the year of 1998. The verification results showed that the AUC of the three models was 0.84. However, the landslide susceptibility distribution of Maxent model was different from those of the other two models. With the same landslide occurrence data, the result of high susceptible area in Maxent model is smaller than Logistic or Bayesian. Maxent model, however, proved to be more efficient in predicting landslide than the other two models. In Maxent's simulations, the responsible factors for landslide susceptibility are timber age class, land cover, timber diameter, crown closure, and soil drainage. The results suggest that it is necessary to consider the possibility of overestimation when using Logistic or Bayesian model, and forest management around the study area can be an effective way to minimize landslide possibility.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.95-101
• /
• 2021

An analysis was conducted to predict the behavior of gasket by applying an optimal-strain energy-density function selected through a uniaxial tensile test and an analysis of the gasket used in an actual hydrogen fuel cell. Among the models compared to predict the materials' properties, the Mooney-Rivlin secondary model showed the behavior most similar to the test results. The maximum stress of the gasket was not significantly different, depending on the location. The maximum surface pressure of the gasket was higher at positions "T" and "Y" than at other positions, owing to the branch-shape effect. In the future, a jig that can measure the surface pressure will be manufactured and a comparative verification study will be conducted between the test results and the analysis results.