• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.3
• /
• pp.164-168
• /
• 2002

Yield prediction model of rice based on the boundary line analysis of the relationships between rice yield and meteorological conditions during rice growing period was reported in the previous report (Kim et al, 2001). Using the 15-year data of the 20 locations used for the model formulation and of the 12 locations not used, the model was tested for its predictability of location to location, year to year, and variety to variety variation of rice yield. The model predicted reliably the mean yield differences among locations, the yearly yield variation in each location, and the yield variation by variety. However, the model showed relatively lower predictability for the years of cool weather injury especially in mountainous locations. In conclusion, the model using boundary line analysis could be used to predict the yield responses to meteorological conditions during rice growth period and the locational, yearly, and varietal variations of rice yield. And the predictability of the present yield prediction model might be improved by including the boundary line analysis for the other factors such as soil characteristics, fertilization levels, etc.

• Korean Journal of Remote Sensing
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2002

Landslide prediction modeling has been regarded as one of the important environmental applications in GIS. While, landslide stability in a certain area as collateral process for prediction modeling can be characterized by DEM-based hydrological features such as flow-direction, flow-accumulation, flow-length, wetness index, and so forth. In this study, Slope-Area plot methodology followed by stability index mapping with these hydrological variables is firstly performed for stability analysis with actual landslide occurrences at Boeun area, Korea, and then Landslide prediction modeling based on likelihood ratio model for landslide potential mapping is carried out; in addition, KOMPSAT EOC imagery is used to detect the locations and scalped scale of Landslide occurrences. These two tasks are independently processed for preparation of unbiased criteria, and then results of those are qualitatively compared. As results of this case study, land stability analysis based on DEM-based hydrological variables directly reflects terrain characteristics; however, the results in the form of land stability map by landslide prediction model are not fully matched with those of hydrologic landslide analysis due to the heuristic scheme based on location of existed landslide occurrences within prediction approach, especially zones of not-investigated occurrences. Therefore, it is expected that the resets on the space-robustness of landslide prediction models in conjunction with DEM-based landslide stability analysis can be effectively utilized to search out unrevealed or hidden landslide occurrences.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.209-212
• /
• 2011

Triangulation is a typical method to locate or identify the location, which requires inherently at least three pre-recognized reference points. In some cases, owing to out of reachability to communication facility the target node can not reachable always to three base stations. This paper presents a predictive method, which can estimate the location of the moving target node in real time even though the target could not get in touch with all three base stations. The method is based on the PID-controlled Moving Objects Spatio-Temporal Model Algorithm. This can predict the moving direction of the moving target, and then combine with the past target position information to judge accurately the location.

• Journal of the Korean Regional Science Association
• /
• v.11 no.1
• /
• pp.31-60
• /
• 1995

The distribution of economic activity over a mutually exclusive and exhaustive categorical industry-region matrix is modeled as a composition of two random components: the probability-like share distribution of jobs and the dynamic evolution of absolute aggregates. The former describes the individual activity location choice by comparing the predicted profitability of the current industry-region pair against that of all other alternatives based on the available information on industry-specific, region specific, or activity specific attributes. The latter describes the time evolution of macro-level aggregates using a dynamic reduced from model. With the seperation of micro choice behavior and macro dynamic aggregate constraint, the usual independence and identicality assumptions become consistent with the activity share distribution, hence multi-regional industrial migration can be represented by a set of probability evolution equations in a conservative Markovian from. We call this a Micro-Macro Composition Approach since the product of the aggregate prediction and the predicted activity share distribution gives the predicted activity distribution gives the predicted activity distribution which explicitly considers the underlying individual choice behavior. The model can be applied to interesting practical problems such as the plant location choice of multinational enterprise, the government industrial ploicy to attract international firms, and the optimal tax-transfer mix to influence activity location choice. We consider the latter as an example.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.128-140
• /
• 1997

A new super compact condenser(SCC), which has been developed recently is especially suitable for an alternative refrigerant HFC-134a due to its high performance and compactness. The SCC is composed of two pipe headers, baffles, narrow multi-rectangular channels, and louvered fin arrays. Alternating inlet and outlet by the inserted baffles in pipe headers guide refrigerant to and from the narrow multi-rectangular channels. Since the flow rate and its lengh are changed depending on the number and location of baffles, the corresponding pressure drop and heat transfer rate are changed. The present study aims to theoretically and experimentally investigate the effects of baffle location and its number on the pressure drop and thermal performance of the SCC with 40 multi-rectangular channels. The results show that the present method provides an acceptable prediction of pressure drop and heat transfer rate for a 4 pass SCC. However, the model significantly under predicts the performance of a 3 pass SCC, which may be attributed to the phase separation of refrigerant flowing through header pipes. Pressure drop is more signifi- cantly influenced than heat transfer rate by the baffle location.

• Explosives and Blasting
• /
• v.30 no.1
• /
• pp.29-36
• /
• 2012

In this study, the influence of priming location inside a blast hole on the ground vibration has been studied. In most of the previous studies dealing with the ground vibration, the effect of priming location in a blast hole was usually considered in a limited way. Thus, it seems that the results of the studies can be applicable only to the relevant sites. Considering the fact that the mechanism of ground vibration caused by blasting is quite complex, the priming location can have a considerable effect on the ground vibration in certain situations and be an important parameter in a blasting design. To identify the characteristics of the wave propagation according to priming locations, total 72 test blasts were carried out with different spacing, burden, drilling length, and charge, and prediction equations were derived. The characteristics of ground vibration, which was changed according to the priming location, was analyzed by using the nomogram of peak particle velocity (PPV) record. Attenuation relations, which were also dependent on the priming location, were analyzed. In this case, four different amounts of charge, that is, 0.5, 1.6, 5, and 15 kg, were used for the test. This criterion of charge amount is specified in the "Blasting design and construction guidelines to road construction" by the Ministry of Land, Transport and Maritime Affairs of Korea.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.1-8
• /
• 2009

The distributed war-game simulation system has been used to represent the virtual battlefield environment. In order to produce a simulation result, simulators connected from a network transfer messages with location information of simulated objects to a central simulation server. This network traffic is an immediate cause of system performance degradation. Therefore, the paper proposes a system to manage and control network traffic generated from distributed war-game simulation. The proposed system determines the moving distance of simulated objects and filters location messages by a distance threshold which is controlled according to system conditions like network traffic and location error. And, the system predicts the next location of simulated objects to minimize location error caused by message filtering. Experimental results demonstrate that the proposed system is effective to control the network traffic of distributed war-game simulation systems and reduce the location error of simulated objects.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.482-486
• /
• 2009

Conventional music players offer simple replay and one way entertainment. The paper presents an algorithm to extract, within a digitally recorded music file, the temporal information of a sequence of target notes (i.e. melody). We assume to have the score (e.g. MIDI or printed score), and using this information, it becomes possible to first sequentially predict the probable location of the target notes. However, recorded music is hardly performed according to the score, especially temporally. Thus, additional analysis is carried out to hone in on the exact location of the target note from the initially predicted location. This prediction and correction process is repeated to find one note after another. This allows us to develop an interactive music player that is enacted by rhythmic interaction, and induce a new user experience, i.e. as if one is playing the music oneself.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.17-24
• /
• 2010

This paper presents calorie expenditure prediction model of daily activity of elderly living alone for LBS(Location Based Service) applications. The proposed method is to describe the daily activity patterns of older adult using PIR (Passive InfraRed) motion sensors and to examine the relationships between physical activity and calorie expenditure. The developed motion detecting system is composed of a sensing system and a server system. The motion detecting system is a set of wireless sensor nodes which has PIR sensor to detect a motion of elder. Each sensing node sends its detection signal to a home gateway via wireless link. The home gateway stores the received signals into a remote database. The server system is composed of a database server and a web server, which provides web-based monitoring system to caregivers for more effective services. The experiment results show the adaptability and feasibility of the calorie expenditure model.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.765-777
• /
• 2002

For the battlefield analysis, it is required to get correct information about the identification and moving status of target enemy units. However, it is difficult for us to collect all of the information perfectly, because of the technology of communications, jamming, and tactics. Therefore, we need a reasoning function that predicts and analyzes future moving status for target units by using collected moving information and domain knowledge. Especially. since the moving units have characteristics of moving objects, which change their position and shape over time, they require functions to manage and predict locations of moving objects. Therefore, in this paper, we propose a location prediction system of moving units for battlefield analysis. The proposed system not only predicts unknown units, unidentified units, and main strike directions to application domain for battlefield analysis, but also estimates the past or future locations of moving objects not stored in a database.