• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.3
• /
• pp.271-279
• /
• 2006

Acoustic Emission (AE) technology is an effective nondestructive testing for continuous monitoring of defect formation and failures in structural materials. This paper presents a source location model using Acoustic Emission (AE) sensors in a Pre-Stressed Concrete (PSC) beam and the evaluation of the model was performed through lab experiments. 54 AE events were made on the surface of the 5m-PSC beam using a Schmidt Hammer and arrival times were measured with 7AE sensors. The source location f3r each event was estimated using least squares. The results were compared with actual positions and the RMSE (Root Mean Square Errors) was about 2cm.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.1
• /
• pp.85-97
• /
• 2006

The PAMS data collected at four sites in Seoul metropolitan area in 2004 were analyzed using the positive matrix factorization (PMF) technique, in order to identify the possible sources and estimate their contributions to ambient VOCs. Ten sources were then resolved at Jeongdong, Bulgwang, Yangpyeong, and Seokmo, including vehicle exhaust, LPG vehicle, petroleum evaporation, coating, solvent, asphalt, LNG, Industry & heating, open burning, and biogenic source. The PMF analysis results showed that vehicle exhaust commonly contributed the largest portion of the predicted total VOCs mass concentration, more than $30\%$ at four sites. The contribution of other resolved sources were significantly different according to the characteristics of site location. In the case of Jeongdong and bulgwang located in urban area, various anthropogenic sources such as coating, solvent, asphalt, residual LPG, and petroleum evaporation contributed about $40\%$ of total VOCs mass. On the other hand, at yangpyeong and Seokmo located in rural and remote area, the portion of these anthropogenic sources was reduced to less than $30\%$ and the contribution of natural sources including open burning and biogenic source clearly observed. These results were considerably corresponding to the emission inventory investigated in this region.

• Journal of Global Scholars of Marketing Science
• /
• v.7
• /
• pp.375-390
• /
• 2001

Currently the super power of department stores over their tenants has mentioned in Korean apparel newspapers very often. It may be the one that the government in fashion industry has not delved into the relationship between department stores and their tenants. The aim in here is to look at the conceptual framework of power based on the retail power oriented and to explain current issues with its theoretical backgrounds. Due to the inherent of retailer power oriented, this study involves not only in French and Raven's power sources but also in positioning power source that is the ability of allocating the location and adjusting size of the store. 235 samples are tested through Lisrel. The results of statistical analysis show that: The power of department store over that perceived by the tenant has negatively influenced countervailing power of the tenant upon department store. The coercive power sources of department store have positively influenced the power of department store over that perceived by the tenant while the non-coercive power sources have not significantly influenced on it. The countervailing power of the tenant has positively influenced the non-coercive power sources of department store perceived by the tenant. On the other hand, the countervailing power of the tenant has not significantly influenced the coercive power sources of department store perceived by the tenant. The implication of these results is that the retailer oriented power sources and its implements differs from the manufacturer oriented ones in the framework of power. A great deal more research is required in order that the relationship between department store and its tenants can be better understood.

• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.589-598
• /
• 2009

In wireless sensor networks, a node that reports information gathered from adjacent assets should relay packets appropriately so that its location context is kept private, and thereby helping ensure the security of the assets that are being monitored. Unfortunately, existing routing methods that counter the local eavesdropping-based tracing deal with a single asset, and most of them suffer from the packet-delivery latency as they prefer to take a separate path of many hops for each packet being sent. In this paper, we propose a routing method, greedy perimeter stateless routing-based source-location privacy with crew size w (GSLP-w), that enhances location privacy of the packet-originating node (i.e., active source) in the presence of multiple assets. GSLP-w is a hybrid method, in which the next-hop node is chosen in one of four modes, namely greedy, random, perimeter, and retreat modes. Random forwarding brings the path diversity, while greedy forwarding refrains from taking an excessively long path and leads to convergence to the destination. Perimeter routing makes detours that avoid the nodes near assets so that they cannot be located by an adversary tracing up the route path. We study the performance of GSLP-w with respect to crew size w (the number of packets being sent per path) and the number of sources. GSLP-w is compared with phantom routing-single path (PR-SP), which is a notable routing method for source-location privacy and our simulation results show that improvements from the point of the ratio of safety period and delivery latency become significant as the number of source nodes increases.

• Korean Journal of Acupuncture
• /
• v.41 no.3
• /
• pp.90-100
• /
• 2024

Objectives : This study examined the historical evolution of the GV26 acupuncture point, focusing on its location, therapeutic indications, and anatomical relevance to the philtrum region. Methods : We reviewed 18 historical acupuncture texts, analyzing the descriptions of GV26's location and associated indications. Results : The location of GV26 has varied over time. Early texts like the A-B Classics of Acupuncture and Moxibustion described it at the center of the philtrum groove, while some 16th-century texts shifted it closer to the nasal cavity. However, many sources continued to emphasize the central philtrum groove as the correct location. GV26 was historically indicated for conditions such as cold-type headache, epilepsy, edema, nasal and eye symptoms, respiratory issues, post-stroke symptoms, jaundice, pestilence, mouth-related symptoms, and low back pain. Epilepsy, edema, and post-stroke facial symptoms were consistently cited across texts, while other indications varied. Cadaveric studies show that the superficial orbicularis oris muscle divides into the upper nasalis and lower labialis portions. Needling the upper third of the philtrum stimulates the thinner, closer-to-maxilla upper nasalis portion, potentially providing stronger stimulation, while needling the center targets the lower labialis portion. Conclusions : Historical variations in GV26's location reflect an evolving understanding of its anatomical and therapeutic significance. The upper third of the philtrum groove may be more effective for acute conditions requiring strong stimulation, whereas the central groove may better address a broader range of conditions. These findings highlight the importance of historical and anatomical context in optimizing GV26's clinical use.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.240-243
• /
• 2007

Geographic routing has been considered as an efficient simple, and scalable routing protocol for wireless sensor networks since it exploits pure location information instead of global topology information to route data packets. Geographic routing requires the sources nodes to be aware of the location of the sinks. In this paper, we propose a scheme named Sink Location Service for geographic routing in wireless Sensor Networks, in which the source nodes can get and update the location of sinks with low overhead. In this scheme, a source and a sink send data announcement and query messages along two paths respectively by geographic routing. The node located on the crossing point of the two paths informs the source about the location of the sink. Then the source can send data packet to the sink by geographic routing. How to guarantee that these two paths have at least one crossing point in any irregular profile of sensor network is the challenge of this paper.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.391-398
• /
• 2016

Acoustic emission (AE) is one of the most powerful techniques for detecting damages and identify damage location during operations. However, in case of the source location technique, there is some limitation in conventional AE technology, because it strongly depends on wave speed in the corresponding structures having heterogeneous composite materials. A compressed natural gas(CNG) pressure vessel is usually made of carbon fiber composite outside of vessel for the purpose of strengthening. In this type of composite material, locating impact damage sources exactly using conventional time arrival method is difficult. To overcome this limitation, this study applied the previously developed Contour D/B map technique to four types of CNG storage tanks to identify the source location of damages caused by external shock. The results of the identification of the source location for different types were compared.

• Structural Engineering and Mechanics
• /
• v.39 no.6
• /
• pp.877-893
• /
• 2011

Response spectra of earthquake ground motions are important in the earthquake-resistant design and reliability analysis of structures. The formulation of the response spectrum in the frequency domain efficiently computes and evaluates the stochastic response spectrum. The frequency information of the excitation can be described using different functional forms. The shapes of the calculated response spectra of the excitation show strong magnitude and site dependency, but weak distance dependency. In this paper, to compare the effect of the earthquake ground motion variables, the contribution of these sources of variability to the response spectrum's uncertainty is calculated by using a stochastic analysis. The analytical results show that earthquake source factors and soil condition variables are the main sources of uncertainty in the response spectra, while path variables, such as distance, anelastic attenuation and upper crust attenuation, have relatively little effect. The presented formulation of dynamic structural response in frequency domain based only on the frequency information of the excitation can provide an important basis for the structural analysis in some location that lacks strong motion records.

• Journal of Information Processing Systems
• /
• v.3 no.2
• /
• pp.64-72
• /
• 2007

Mobile technology appears promising as a method to promote group performance in circumstances dependent on time, but not member proximity. However, the success of mobile technology in group decision-making situations has not yet been proven. This paper aims to see how mobile technology affects the performance of group decision-making tasks that should be resolved urgently and/or sources of idea are disconnected with on-line network. Laboratory experiment was used to investigate the effects of mobile factors on group decision-making. The results from the experiment supported the proposition that pressures of time and location play a significant role in the assessment of group decision performance measures. We found that the adoption of mobile technology to group decision-making procedures might be competitive when group decision-making tasks are urgent and sources of idea are disconnected with on-line network, even though mobile technology is not a panacea on which to depend when designing group decision-making.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.25-32
• /
• 2006

We present a imaging method of seismic sources by time reversal propagation of seismic waves. Time-reversal wave propagation is actively used in medical imaging, non destructive testing and waveform tomography. Time-reversal wave propagation is based on the time-reversal invariance and the spatial reciprocity of the wave equation. A signal is recorded by an array of receivers, time-reversed and then back-propagated into the medium. The time-reversed signal propagates back into the same medium and the energy refocuses back at the source location. The increasing power of computers and numerical methods makes it possible to simulate more accurately the propagation of seismic waves in heterogenous media. In this work, a staggered-grid finite-difference solution of the elastic wave equation is employed for the wave propagation simulation. With numerical experiments, we show that the time-reversal imaging will enable us to explore the spatio-temporal history of complex earthquake.