• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.1-9
• /
• 2021

3D-NAND flash memory provides high capacity per unit area by stacking 2D-NAND cells having a planar structure. However, due to the nature of the lamination process, there is a problem that the frequency of error occurrence may vary depending on each layer or physical cell location. This phenomenon becomes more pronounced as the number of write/erase(P/E) operations of the flash memory increases. Most flash-based storage devices such as SSDs use ECC for error correction. Since this method provides a fixed strength of data protection for all flash memory pages, it has limitations in 3D NAND flash memory, where the error rate varies depending on the physical location. Therefore, in this paper, pages and layers with different error rates are classified into clusters through the K-means machine learning algorithm, and differentiated data protection strength is applied to each cluster. We classify pages and layers based on the number of errors measured after endurance test, where the error rate varies significantly for each page and layer, and add parity data to stripes for areas vulnerable to errors to provides differentiate data protection strength. We show the possibility that this differentiated data protection policy can contribute to the improvement of reliability and lifespan of 3D NAND flash memory compared to the protection techniques using RAID-like or ECC alone.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.409-414
• /
• 2021

In order to acquire an image from a gamma camera, linearity correction must be performed. To this end, digital coordinates are acquired by using a linearity map to accurately specify the location where the scintillator and gamma rays interact. In this study, a method for acquiring undistorted images and digital coordinates was developed using a lookup table and maximum likelihood position estimation without using a linearity map. The proposed method was verified by configuring a small gamma camera through DETECT2000 simulation. A gamma camera was constructed using a GAGG scintillator and a SiPM optical sensor, and a gamma-ray interaction was generated at the center of the scintillator, and a lookup table was prepared using the ratio of the signals obtained from the SiPM. Through the prepared lookup table and the maximum likelihood position estimation, the position of the signal obtained by the gamma-ray interaction was acquired as digital coordinates to compose an image. As a result, the linearity was maintained compared to the generally acquired image, the accuracy of the location where the gamma-ray interaction was generated was excellent, and the distance between the locations was uniform. Since the lookup table obtained through simulation is created using the ratio of the signal, it can be directly used in the experiment, and the position of the signal can be conveniently obtained with digital coordinates with corrected linearity without creating a linearity map.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.49-56
• /
• 1997

In mobile communications, it is very important that we predict the propagation environments of radiation pattern, in order to decide the service area, select the best location of the best station, design the cell etc. Therefore, by analyzing the propagation prediction model that is varied according to the kind of antenna, the beam angle, the terrain and obstacles, we expect that the economic operating of communication networks, the calling quality and the service of subscriber will be enhanced. In this paper, we select the around of Seji base station in Naju-city Chonnam for modern suburban area and measure the field strength to propose the optimal propagation prediction model for suburban areas. We propose the propagation prediction model that, it is not found in the other models until now, consists of the correction coefficient with the relative differences of antenna effective height of the base station and mobile station for minimizing errors. Finally, comparing the results of the field test with the computer simulation(PPGIS : Propagation Prediction Geographic Information System) results for the Hata model, the Egri model, the Carey model and the propose model, we confirm the property of the proposed model.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.31-39
• /
• 2003

The MPEG-2 source coding algorithm is very sensitive to transmission errors due to using of variable-length coding. When the compressed data are transmitted, transmission errors are generated and error correction scheme is not able to be corrected well them. In the decoder error concealment (EC) techniques must be used to conceal errors and it is able to minimize degradation of video quality. The proposed algorithm is method to conceal successive macroblock errors of I-frame and utilize temporal information of B-frame and spatial information of P-frame In the previous GOP which is temporally the nearest location to I-frame. This method can improve motion distortion and blurring by temporal and spatial errors which cause at existing error concealment techniques. In network where the violent transmission errors occur, we can conceal more efficiently severe slice errors. This algorithm is Peformed in MPEG-2 video codec and Prove that we can conceal efficiently slice errors of I-frame compared with other approaches by simulations.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.3-12
• /
• 2013

In order to evaluate dredging results scientifically the system which can manage and estimate working process by monitoring dredging process in real-time needs to be constructed. We constructed real-time dredging management system for guidance of a dredging vessel and for survey of dredging construction. This system was designed to have functions of dredger location by GPS, ship direction measurement by GPS/Gyroscope combination, Grab position measurement, dredging depth measurement and correction. In addition, we developed the programs for controlling and operating the constructed system. The system could induce the vessel to accurate position and conduct dredging according to plan and the effectiveness of the system was evaluated through the results of application to actual dredging construction site.

• Archives of Plastic Surgery
• /
• v.41 no.6
• /
• pp.740-747
• /
• 2014

Background Autologous fat graft has become a useful technique for correction of acquired contour deformity in reconstructed breasts. However, there remains controversial regarding the efficacy and safety of the practice for reconstructive breast surgery. Methods A retrospective review was performed on 102 patients who had secondary fat grafting after breast reconstruction. Fat harvest, refinement and injection were done by Coleman's technique. All patients were followed up postoperatively within 1 month and after 6 months including physical examination and ultrasonography. In 38 patients, the reabsorption rate was calculated by serial changes of thickness between skin and pectoral fascia in the ultrasonic finding. Locoregional recurrence rate was compared with control group of 449 patients who had breast reconstruction without fat graft in the same time period. Results Average 49.3 mL fat was injected into each breast. The most common location of fat graft was upper pole, followed by axilla, lower and medial breasts. During 28.7 months of average follow-up period, 2.9% of total patients had symptoms of palpable mass on fat graft side and ultrasonography identified fat necrosis and cyst formation in 17.6% of the patients. Calculated fat reabsorption rate was 32.9%. Locoregional recurrence was occurred in 1 patient (0.9%) and the rate was not different significantly with control group (2%). Conclusions Although further studies are required to provide surgeons with definitive guidelines for the implementation of fat grafting, we propose autologous fat graft is an efficient and safe technique for secondary breast reconstruction.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.628-632
• /
• 2005

Remote sensing through atmospheric turbulence had been hard works for a long time, because wavefront distortion due to the Earth's atmospheric turbulence deteriorates image quality. But due to the appearance of adaptive optics, it is no longer difficult things. Adaptive optics is the technology to correct random optical wavefront distortions in real time. For past three decades, research on adaptive optics has been performed actively. Currently, most of newly built telescopes have adaptive optical systems. Adaptive optical system is typically composed of three parts, wavefront sensing, wavefront correction and control. In this work, the wavefront sensing technology for adaptive optical system is treated. More specifically, shearing interferometers and Shack-Hartmann wavefront sensors are considered. Both of them are zonal wavefront sensors and measure the slope of a wavefront. . In this study, the shearing interferometer is made up of four right-angle prisms, whose relative sliding motions provide the lateral shearing and phase shifts necessary for wavefront measurement. Further, a special phase-measuring least-squares algorithm is adopted to compensate for the phase-shifting error caused by the variation in the thickness of the index-matching oil between the prisms. Shack-Hartmann wavefront sensors are widely used in adaptive optics for wavefront sensing. It uses an array of identical positive lenslets. And each lenslet acts as a subaperture and produces spot image. Distortion of an input wavefront changes the location of spot image. And the slope of a wavefront is obtained by measuring this relative deviation of spot image. Structures and measuring algorithms of each sensor will be presented. Also, the results of wavefront measurement will be given. Using these wavefront sensing technology, an adaptive optical system will be built in the future.

• Journal of Korean Foot and Ankle Society
• /
• v.13 no.2
• /
• pp.118-123
• /
• 2009

Purpose: We wanted to evaluate the relating factors for deformities of the foot after tibial fracture and the outcome of respective surgical treatment. Materials and Methods: We studied thirty-two patients (thirty-five feet) who had foot deformities after tibia fracture. The age, gender, shape, location, concurrent soft tissue injury and operative treatment of tibial fracture were analysed and outcome of the surgical treatment was investigated. Results: Deformities of the foot mostly occurred in open fractures of Gustilo type 3 or closed fracture with severe soft tissue injury. Variable surgical treatments such as simple release, lengthening, Z-plasty and osteotomy were performed. The AOFAS ankle-hind foot scale was improved from average of 37.3 points preoperatively to an average of 77.2 points at the last follow up. The Maryland foot score was from 42.9 to 90.2 and AOFAS Lesser Toe Metatarso-phalangeal interphalangeal scale was from 42.9 to 90.5. Radiological correction was also improved from 21.9 degrees to 7.9 degrees (Meary angle), from 112.2 to 138.5 (Hibb's angle) and from 33.8 to 25.9 (Calcaneal pitch). Conclusion: We proposed that great care should be taken of treatment for the tibial fracture and early detection and proper management of the foot deformities are crucial.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.465-472
• /
• 2015

In order to improve the performance of TCAS it should improve the performance of the sensor, which transmits a variety of information. In this paper, To improve the performance of the existing radar sensors such as being used in behalf of the next generation air traffic control system, ads-b the applied. In addition, ADS-B in a high precision by using information from the correction GPS system, SBAS assume would be able to apply an improved location accuracy for TCAS and analyzed TCAS and ADS-B. Played the simulation results, TCAS equipment receives the help of these ADS-B can calculate a CPA to determine the position of the aircraft in advance, and it was confirmed that it is possible to reduce the unnecessary RA operation, also, the pilot reduction and the workload, it has advantages such as fuel consumption and time associated with the reduced operation unnecessary RA was confirmed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.142-152
• /
• 2016

GPS is not able to be used for indoor positioning and currently most of techniques emerging to overcome the limit of GPS utilize private wireless networks. However, these methods require high costs for installation and maintenance, and they are inappropriate to be used in the place where precise positioning is needed as in indoor parking lots. This paper proposes a vehicular indoor positioning method based on QR-code recognition. The method gets an absolute coordinate through QR-code scanning, and obtain the location (an relative coordinate) of a black-box camera using the tilt and roll angle correction through affine transformation, scale transformation, and trigonometric function. Using these information of an absolute coordinate and an relative one, the precise position of a car is estimated. As a result, average error of 13.79cm is achieved and it corresponds to just 27.6% error rate in contrast to 50cm error of the recent technique based on wireless networks.