• 대한설비공학회지:설비저널
• /
• 제16권5호
• /
• pp.516-524
• /
• 1987

This paper presents experimental data of fluctuation characteristics of local void fraction of air-water two-phase flow which are associated with the flow pattern, annular gap size and radial location in vertical concentric annuli with coefficient of skewness and kurtosis. The annular gap widths are 13mm, 11mm, and 9mm for a 38m inner diameter as the lucite outer tube. A electrical conductivity probe was used to measure the local void fraction and traversed diametrically from inner wall to outer wall using radial increments of 2mm. It was shown that distribution of the coefficient of skewness and kurtosis, which is related that the one is the asymmetry and the other peakness of local void fraction distribution was influenced by flow pattern, annular gap size and radial location.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.382-387
• /
• 2017

이 논문은 시설채소류의 특화계수와 특화에 영향을 미치는 요인들을 분석하였다. 이를 위해 2000년, 2005년, 2010년 농업총조사 자료를 이용하여 지역특화 계수를 도출하였다. 분석결과 시설 시금치와 상추의 특화정도가 심화된 것으로 나타났다. 즉 2000년 이후 시설원예 채소류의 지역별 특화정도가 강화되고 있다는 것을 알 수 있다. 또한 로짓분석을 통해 시설 시금치와 상추의 특화에 영향을 미치는 요인들을 분석하였다. 시금치의 특화에 영향을 미치는 요인들은 1인당 GRDP, 연령, 학력, 평균종사자수, 컴퓨터보유비율이 통계적으로 유의한 것으로 분석되었다. 즉 1인당 GRDP, 연령, 학력이 낮을수록, 평균 종사자수와 컴퓨터보유비율이 높을수록 시설 시금치가 특화되어 있는 것으로 분석되었다. 상추의 특화에 영향을 미치는 요인들은 1인당 GRDP, 학력, 생산자조직비율이 통계적으로 유의한 것으로 분석되었다. 즉 1인당 GRDP, 연령, 학력이 낮을수록, 생산자조직비율이 높을수록 시설 상추가 특화되어 있는 것으로 분석되었다. 시설 엽채류의 지역별 특화수준을 진단하고 경쟁력 강화를 위한 전략을 마련할 수 있을 것이다. 한편, 지역농정의 역량을 선택과 집중의 강령에 입각하여 지역농업 특화 전략을 전개하는 대책이 요망된다.

• 사상체질의학회지
• /
• 제29권1호
• /
• pp.29-39
• /
• 2017

Objectives Facial features can be utilized as an indicator of Korean medical diagnosis. They are often measured by using the diagnostic device for an objective diagnosis. Accordingly, it is necessary to verify the reliability of the features which are obtained from the device for the accurate diagnosis. In this study, we attempt to evaluate the repeatability of facial feature variables using the Sasang Constitutional Analysis Tool(SCAT) for the Sasang Constitutional face diagnosis. Methods Facial pictures of two subjects were taken 24 times respectively for two days according to a standard guideline. In order to evaluate the repeatability, the coefficient of variation was calculated for the facial features extracted from frontal and profile images. Results The coefficient of variation was less than 10% in most of the facial features except the upper lip, trichion, and chins related features. Conclusions It was confirmed that the coefficient of variation was small in most of the features which enables the objective and reliable analysis of face. However, some features showed the low reliability because the location of facial landmarks related to them is ambiguous. In order to solve the problem, a clear basis for the location discussion is required.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.160.1-160.1
• /
• 2011

In this study, the influence of methodology of assessing water levels on the discharge coefficient of sluice for tidal power generation was investigated. A physical experiment was performed in a planar open channel by installing 1/70 scale model of the sluice caisson in the planar open channel. In front of and behind the sluice model, sloping bathymetry was made to reproduce corresponding field condition. By analyzing the experimental results, it was found that the location of measuring water levels significantly affects the estimates of the discharge coefficient, due to the variability of the parameter according to the head difference between the measuring locations. Therefore, it is necessary to be careful in estimating and utilizing the discharge coefficient in the relevant study of a tidal power generation.

• Wind and Structures
• /
• 제30권2호
• /
• pp.199-210
• /
• 2020

Building wind pressure coefficient transiting test is a new method to test the building wind pressure coefficient by using the wind generated by a moving vehicle, which is susceptible to natural wind and other factors. In this paper, the Commonwealth Advisory Aeronautical Research Council standard model with a scale ratio of 1:300 is used as the test object, and the wind pressure coefficient transiting test is repeated under different natural wind conditions to study the influence of natural wind. Natural wind is measured by an ultrasonic anemometer at a fixed location. All building wind pressure coefficient transiting tests meet the test conditions, and the vehicle's driving speed is 72 km/h. The mean wind pressure coefficient, the fluctuating wind pressure coefficient, and the correlation coefficient of wind pressure are used to describe the influence of natural wind on the building wind pressure coefficient transiting test qualitatively and quantitatively. Some rules, which can also help subsequent transiting tests, are also summarized.

• 한국지반신소재학회논문집
• /
• 제19권2호
• /
• pp.1-11
• /
• 2020

대구경 현장타설말뚝의 수평지지 특성은 말뚝의 강성, 인접지반의 수평지반반력에 따라 크게 좌우된다. 특히 말뚝설계 시 많이 활용되는 경험적인 수평지반반력계수는 그 결과의 값에 따라서 지지력의 차이가 크므로 수평지지력을 평가하는 데 매우 중요한 요소임에도 불구하고 대구경 현장타설말뚝에 대한 지반반력계수의 평가가 미흡한 실정이다. 또한, 말뚝의 취약부인 수평하중에 대한 영향범위와 최대 모멘트의 발생위치는 서로 상관관계가 있을 수 있고, 수평하중에 대한 말뚝의 보강영역을 판단하는데 주요 고려사항임에도 기존 연구에서는 이 관계에 대해 평가되지 않았다. 이에 본 연구는 대구경 현장타설말뚝의 수평지반반력계수를 평가하고, 말뚝의 영향범위(1/β)와 최대 모멘트의 발생위치(z_m)의 관계를 조사하고자 대구경 현장타설말뚝에 대한 현장시험과 비선형 해석을 수행하였다. 연구결과, 대구경 현장타설말뚝의 수평지지력은 경험식을 통한 산정결과에 따라 최대 190%정도 차이를 보였다. 또한, 말뚝의 수평거동에 대한 영향범위와 최대 모멘트의 발생위치의 관계는 지반조건에 따라 선형적 관계인 것으로 평가되었다.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1774-1779
• /
• 2016

This paper proposes a portable cable fault detection system with automatic fault distinction and distance measurement using time-frequency correlation and reference signal elimination method and automatic fault classification algorithm in order to have more accurate fault determination and location detection than conventional time domain refelectometry (TDR) system despite increased signal attenuation due to the long distance to cable fault location. The performance of the developed system method was validated via an experiment in the test field constructed for the standardized performance test of power cable fault location equipments. The performance evaluation showed that accuracy of the developed system is less than 1.34%. Also, an error of automatic fault type and location by detection of phase and peak value through elimination of the reference signal and normalization of correlation coefficient and automatic fault classification algorithm not occurred.

• 소음진동
• /
• 제9권4호
• /
• pp.738-746
• /
• 1999

The performance of muffler can be improved for a frequency range of interest by moving inlet and outlet locations. And optimal location of inlet and outlet can be determined to improve the acoustic performance. The optimum design using FEM, however, may take a very long time and be very hard to take inlet and outlet locations as design variables. In this paper, the acoustic performance of reactive type single expansion chamber muffler is predicted using higher order mode theory. The sensitivity analysis of transmission loss with respect to the location of inlet and outlet is suggested. And the acoustic power transmission coefficient for a frequency of interest is used as cost function. Optimum location of inlet and outlet is determined to minimize cost function by using SUMT algorithm.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.191-197
• /
• 2010

In spite of a large amount of previous research, detail study on modified mass in proportional damping system is not well understood. It is common to predict structural dynamic design parameters due to the change of mass, but to predict the amount of modified mass and the location where the mass is being modified are rarely found in previous literature. Such inverse problem required detail analytical study in order to understand structural modification in proportional damping system. This paper predicts the modified mass and the modified mass location in proportional damping system using sensitivity coefficients and iterative method. The sensitivity coefficients are obtained from the change of eigenvectors due to mass modification. This method is applied to a horizontal beam and three degree of freedoms system. To validate the predicted changing mass and its location, the obtained results are compared to the reanalysis result which shows good agreement.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1583-1589
• /
• 2016

This paper proposes an improved spread spectrum time domain reflectometry (ISSTDR) using time-frequency correlation and reference signal elimination method in order to have more accurate fault determination and location detection than conventional (SSTDR) despite increased signal attenuation due to the long distance to cable fault location. The proposed method has a two-step process: the first step is to detect a peak location of the reference signal using time-frequency correlation analysis, and the second step is to detect a peak location of the correlation coefficient of the reflected signal by removing the reference signal. The proposed method was validated through comparison with existing SSTDR methods in open-and short-circuit fault detection experiments of low voltage power cables. The experimental results showed that the proposed method can detect correlation coefficients at fault locations accurately despite reflected signal attenuation so that cable faults can be detected more accurately and clearly in comparison to existing methods.