• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.2
• /
• pp.223-230
• /
• 2003

Stress patterns are created in the plastic spur gear tooth body by introducing a hole or a steel pin to improve stress distribution. Static analysis using finite element method is carried out to show the effect. The result shows that maximum stress as well as tooth tip displacement is dependent on the size and location of a hole or a steel pin. When a hole located on the tooth center line, the maximum static stress level and the tooth tip deflection is always higher than that of a solid gear. But, a considerable reduction in the maximum stress and tooth tip displacement is achieved by insertion of steel pin.

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.2
• /
• pp.97-102
• /
• 2011

Purpose: IMRT QA using 2Dimensional array detector is carried out with condition for discrete dose distribution clinically. And it can affect uncertainty of evaluation using gamma method. We analyze gamma index variation according to grid size and suggest validate range of grid size for IMRT QA in Hospital. Materials and Methods: We performed QA using OniPro I'mRT system software version 1.7b on 10 patients (head and neck) for IMRT. The reference dose plane (grid size, 0.1 cm; location, [0, 0, 0]) from RTP was compared with the dose plane that has different grid size (0.1 cm, 0.5 cm, 1.0 cm, 2.0 cm, 4.0 cm) and different location (along Y-axis 0 cm, 0.2 cm, 0.5 cm, 1.0 cm). The gamma index variation was evaluated by observing the level of changes in Gamma pass rate, Average signal, Standard deviation for each case. Results: The average signal for each grid size showed difference levels of 0%, -0.19%, -0.04%, -0.46%, -8.32% and the standard deviation for each grid size showed difference levels of 0%, -0.30%, 1.24%, -0.70%, -7.99%. The gamma pass rate for each grid size showed difference levels of 0%, 0.27%, -1.43%, 5.32%, 5.60%. The gamma evaluation results according to distance in grid size range of 0.1 cm to 1.0 cm showed good agreement with reference condition (grid size 0.1 cm) within 1.5% and over 5% in case of the grid size was greater than 2.0 cm. Conclusion: We recognize that the grid size of gamma evaluation can make errors of IMRT QA. So we have to consider uncertainty of gamma evaluation according to the grid size and apply smaller than 2 cm grid size to reduce error and increase accuracy clinically.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.4
• /
• pp.35-42
• /
• 2013

The study aims to investigate general characteristics of Jae-sil from an architectural perspective by grasping location, deployment, structure, and plan composition based on existing inhabited conditions in Jeollabukdo. Results derived from the study are as follows. First, the location of Jae-sil is classified into mountainous and village types, and the two types showed a similar distribution. The village type showed the most distribution in the foot of a mountain in the rear of village, while the mountainous type is close to graveyard. The Jae-sil were mostly exposed to south, southeast, and southeast, which was not significantly different from residence. For deployment of the Jae-sil, a "二" shaped house, where main quarter and gated building are parallel located, can be common, indicating that additional attached building is less required. Second, for the platform out of structural components, coursed masonry was conducted by using natural rocks, and placed were a prop on the platform, first line on processed foot stone, and others on natural foot stone. For pillar, front line round columns, while others square columns. The binding type of the upper part of pillar is dominated by jangyeosujang and sorosujang. For wooden frame structure, 5ryangs were the most distributed, and out of these, 1goju 5ryang was the most generally used. For a roof part, it was composed with gambrel roof with single eave, and the roof was constructed by placing traditional Korean tile roof on the top. Third, for a size of Jae-sil out of plan composition, although the facade and the side of it were presented in a diverse manner, 4 facade rooms and 1.5 side rooms were the most frequently presented, and all Jae-sil were equipped with front ceremonial space. For spatial composition of Jae-sil, main floored hall is placed at the center, and each room is placed on the left and right side to secure space for ancestral rite for participants of it, and for a house with 5 rooms or more, it shows that main floored hall and rooms are weighted from side to side.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.282-289
• /
• 2011

GHz electromagnetic interference (EMI) characteristics are analyzed for a 3dimensional (3D) stacked chip power distribution network (PDN) with through silicon via (TSV) connections. The EMI problem is mostly raised by P/G (power/ground) noise due to high switching current magnitudes and high PDN impedances. The 3D stacked chip PDN is decomposed into P/G TSVs and vertically stacked capacitive chip PDNs. The TSV inductances combine with the chip PDN capacitances produce resonances and increase the PDN impedance level in the GHz frequency range. These effects depend on stacking configurations and P/G TSV designs and are analyzed using the P/G TSV model and chip PDN model. When a small size chip PDN and a large size chip PDN are stacked, the small one's impedance is more seriously affected by TSV effects and shows higher levels. As a P/G TSV location is moved to a corner of the chip PDNs, larger PDN impedances appear. When P/G TSV numbers are enlarged, the TSV effects push the resonances to a higher frequency range. As a small size chip PDN is located closer to the center of a large size chip PDN, the TSV effects are enhanced.

• Journal of the Korean Society of Radiology
• /
• v.9 no.1
• /
• pp.17-21
• /
• 2015

Recently, As people's interest in the health of teeth is increased in the medical field changed into aging society, the number of times for the radiological diagnosis is increased. It can be said that the radiation exposure dose of Korean population is increased. It is also growing concern about radiation exposure. Therefore, the basic data for the dental panoramic X-ray system, its investigation and measuring the radiation dose is needed. In this study, we used ALOKA PDM-117 dosimeter and estimated a two-dimensional dose distribution of the dental panoramic X-ray system (VATEC Pax-400). Dose evaluation about the distribution is confirmed from the point of radiation exposure of a patient. Dose distribution of the dental panoramic X-ray system irradiated chin and the facial region to high dose as well as the parts of teeth. It was founded that the eye lens which are sensitive to radiation are exposed to unnecessary radiation, considering the effect of scattered radiation. The results of this study will be used more accurate dose assessment in a variety of object size and location of measuring dose.

• Ocean and Polar Research
• /
• v.41 no.4
• /
• pp.275-288
• /
• 2019

We investigated flux, grain size distribution, Nd-Sr isotope composition, mineral composition, and trace metal composition (REEs and Sc) of inorganic silicate fraction (ISF, mainly Asian dust with an unrestricted amount of volcanic materials) deposited during 600~1000 ka across the Mid-Pleistocene Transition at core NPGP 1401-2A (32°01'N, 178°59'E, 5205m) taken from the central part of the North Pacific. Our results reveal about a 2-fold increase in ISF flux after 800 ka, which is associated with an increase in La/Sc and a decrease in mean grain size. Asian dusts are finer than volcanic materials and La/Sc increases with the enhanced contribution of Asian dusts. Thus, increased flux after 800 ka can be explained by the increased contribution of Asian dusts relative to volcanic materials, likely due to an intensified Westerly Jet (WJ) and the drying of the Asian continent after the MPT. Mean grain size of ISF varies systematically in relation to glacial-interglacial cycles with a decrease during glacial stages, which is consistent with the previous results in the study area. Such a cyclical pattern is also attributed to the increase in the relative contribution of Asian dusts over volcanic components in glacial stages due to intensified WJ and drying of the Asian continent. Thus, it can be concluded that climate changes that had occurred across the MPT were similar to those of interglacial to glacial transitions at least in terms of the dust budget. Different from the Shatsky Rise, however, compositional changes associated with glacial-interglacial mean grain size fluctuations are not observed in Nd-Sr isotope ratios and trace element composition in our study of the Hess Rise. This may be attributed to the location of the study site far (> 4,000 km) from the volcanic sources. The volcanic component at the study site comprises less than 10% and varies within 3% over glacial-interglacial cycles. Such a small variation was not enough to imprint geochemical signals.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.263-268
• /
• 2016

In the polymer shaping process that uses molds, the quality of the molded products is determined not only by the flow of the (molten) polymer but also by the air venting in the cavity. Inadequate air venting in the cavity can cause defects in the product, such as voids, short shot, or black streaks. As it is critical to consider the location and size of the vents for proper venting of the air in the cavity, a method that predicts the flow of air and material is required. The venting of air by the flow of rubber inside the cavity was simulated by using a multi-phase computational fluid dynamics method. Through computer simulation, the interface of rubber and air over time was predicted. Then, the velocity and pressure distribution of the venting air were observed. Our research proposes a fundamental method for analyzing the multi-phase flow of polymer materials and air inside the cavity of a mold.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.5
• /
• pp.676-683
• /
• 2023

The development of the egg, larvae, and juveniles of Acheilognathus macropterus from the Wicheon stream of Nakdonggang River was investigated for early life history characteristics. The fish used in the study were collected from Wicheon stream located in Bian-myeon, Uiseong-gun, Gyeongsangbuk-do. The fertilized egg was 1.88±0.09 mm (n=30) in long diameter and 1.34±0.06 mm (n=30) in short diameter. After fertilization at a water temperature of 20℃, the egg took 31 h and 40 min to hatch. Newly hatched larvae had an average total length of 3.92±0.13 mm (n=30) and possessed a yolk sac the mouth and anus were not developed. Twenty days after hatching, the postflexion larvae had an average total length of 8.08±0.29 mm (n=30), with the tail tip fully bent at 45° and began feeding. Thirty-three days after hatching, the number of fin stems reached an integer with an average total length of 15.0±1.08 mm (n=30). In this study, differences in the egg size, hatching time, melanophore development period, and distribution location were confirmed between A. macropterus and allied species.

• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.159-171
• /
• 1996

The aim of this study is which factors affect the commercial land values and how they act upon them through distribution of commercial land values by multiple regression analysis in Gwangju city. The major findings of this study are as follows: (1) The changes of commercial land values distribution in $1989{\sim}1996$, We see that the commercial area of higher land values extends following the main arterial road. This is related to urbanization in urban fringe while the decline of commercial land values occurs in city center with long history of commercial region. This is due to unsuitableness in rapid changes of commercial environment because of fragmented lots, old buildings. traffic congestion etc. (2) The regions where commercial land values greatly rose are the west in constructed the new planning city center of Sangmu-dong. and the south west in which is related to the extension of high density apartment and the location of big discount stores. (3) Through the changes in commercial land values distribution map. and road map, topographical map, we know that commercial land values is related to various factors; namely, distance from CBD, convenient traffic, reputation of commercial district, condition of a road, size of supplementary, a degree of commercial land use etc. (4) From the above related factor, six variables are extracted by operational definition. That is the spatial distance from the city center, the walking distance to a stopping place, the road width, the amount of bus traffic, the amount of pedestrian, the number of the shop. (5) Data of seven variables are collected on the highest values point of each Dong. We applicate multiple regression analysis with commercial land values as a dependent variable, extracted six variables as independent variables. (6) As a result of multiple regression on the determinants of commercial land values, the variables which is greatly related to commercial land values are the amount of pedestrain, the spatial distance from city center. We identify that two variables explain variance of the commercial land values by 65%. (7) In order to make clear about not explained 35%. we carry out analysis of residual. In consequence, we see small estimate in downtown area and large estimate in urban fringe. This feature is due to simple core structure of Gwangju city and limits of this regression model.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.9
• /
• pp.662-668
• /
• 2007

In this study, jet fans are installed with 4 cases in the straight long tunnel; inlet-side setup, middle-side setup, outlet-side setup, and dispersion setup. A bus is selected as fired car, of which fire size is 20MW. And fired car locates at 100m, 700m, 1500m position from tunnel inlet, respectively. FLUENT, commercial finite-volume code, is used to analyze the performance. The velocity profile, $CO_2$ concentration, temperature distribution are examined for analysis. Performance of smoke control is compared by the backlayering length. Consequently, inlet-side setup of jet fans is a little more efficient than other cases considering the fire occurrence frequency in tunnel.