• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.79-86
• /
• 2000

Recently, application of the reinforced earth wall is in increasing trend. Although many investigations on the influence of the length and spacing of reinforcement and the values of surcharge load has been carried out in the past, but the research about the influence of the location and value of surcharge loads has been scarce. Therefore this study was necessitated. The model test were carried out by varying the location and value of surcharge loads for two types of the backfill soils.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.151-156
• /
• 2014

Control charts are generally used for process control, but the role of traditional control charts have been limited in case of a contaminated process. Traditional $\bar{x}$ control charts have not been activated well for such a problem because of trying to control processes as center line and control limits changed by the contaminated value. This paper is to propose robust $\bar{x}$ control charts which is considering a location parameter in order to respond to contaminated process. In this paper, we consider $\bar{x}_{\alpha}$, that is trimmed rate; typically ten percent rate is used. By comparing with p, ARL value, the responding results are decided. The comparison resultant results of proposed two control charts are shown and are well contrasted.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.11
• /
• pp.3145-3162
• /
• 2023

As an important technology of the internetwork, wireless sensor network technique plays an important role in indoor localization. Non-line-of-sight (NLOS) problem has a large effect on indoor location accuracy. A location algorithm based on improved particle filter and directional probabilistic data association (IPF-DPDA) for WSN is proposed to solve NLOS issue in this paper. Firstly, the improved particle filter is proposed to reduce error of measuring distance. Then the hypothesis test is used to detect whether measurements are in LOS situations or NLOS situations for N different groups. When there are measurements in the validation gate, the corresponding association probabilities are applied to weight retained position estimate to gain final location estimation. We have improved the traditional data association and added directional information on the original basis. If the validation gate has no measured value, we make use of the Kalman prediction value to renew. Finally, simulation and experimental results show that compared with existing methods, the IPF-DPDA performance better.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.27-38
• /
• 2012

The purpose of this study is to analysis the concept of location efficiency, a base for the qualitative evaluation of TOD, and to propose the method of urban design for the improvement of location efficiency. Because of the environmental crisis by urbanization, sprawl and global warming, the importance of the solution through TOD has been increasing. For the future development of TOD, it becomes important to evaluate TOD qualitatively. From the study, it is grasped that location efficiency contains the concepts of value recapture, QoL and choice, financial return, and efficient regional land use and patterns. And the method of urban design for location efficiency is proposed as the followings: Form Based Zoning as land use plan, TOD and TOC model as node function, and street systems, mixed-use development, characteristic housing with various types, and networking of neighborhood facilities as place function.

• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.86-95
• /
• 2005

Location-based services or LBS refer to value-added service by processing information utilizing mobile user location. With the rapidly increasing wireless Internet subscribers and world LBS market, the various location based applications are introduced such as buddy finder, proximity and security services. As the killer application of the wireless Internet, the LBS have reconsidered technology about location determination technology, LBS middleware server for various application, and diverse contents processing technology. However, there are fears that this new wealth of personal location information will lead to new security risks, to the invasion of the privacy of people and organizations. This paper describes a novel security approach on open LBS service to validate certificate based on current LBS platform environment using XKMS (XML Key Management Specification) and SAML (Security Assertion Markup Language), XACML (extensible Access Control Markup Language) in XML security mechanism.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.2
• /
• pp.321-329
• /
• 2012

In this study, statistical analysis under both stationary and non-stationary climate was conducted for rainfall data measured in Seoul. Generalised Extreme Value (GEV) distribution and Gumbel distribution were used for the analysis. Rainfall changes under the non-stationary climate were estimated by applying time variable (t) to location parameter (${\xi}$). Rainfall depths calculated in non-stationary climate increased by 1.1 to 6.2mm and 1.0 to 4.6mm for the GEV distribution and gumbel distribution respectively from those stationary forms. Changes in annual maximum rainfall were estimated with rate of change in the location parameter (${\xi}1{\cdot}t$), and temporal changes of return period were predicted. This was also available for re-evaluating the current sewer design return period. Design criteria of sewer system was newly suggested considering life expectance of the system as well as temporal changes in the return period.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.126-133
• /
• 2017

This report investigates the stress distribution according to the location and shape change of the circular hole for the lightweight design of the cross beam of a railway passenger car and studies the lightweight design. To design a lightweight cross beam with a circular hole, we selected the non-circular crossbeam as a basic model, examined the stress distribution and displacement by position and determined the location, shape, size and quantity of the hole for light weight. We analyzed the effects of the position and shape of the hole on the maximum equivalent stress and displacement. The influencing factors were set as the design parameters, and the stress value was examined according to the variation of each variable. By considering the stress value according to the change of each variable and selecting the design parameter with the narrowest scattering value of the stress at each position of the hollow cross beam with various hole positions and shapes, we studied a cross beam with a circle hole under identical load condition to have an equal stress distribution to that of a non-circular cross beam.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.261-264
• /
• 2004

We propose a location management with adaptive binding idle lifetime scheme for IP-based wireless network. In our proposed scheme, the binding idle lifetime value is adaptively varied according to user characteristics. The main idea is that the mobile node (MN) does location update (LU) even in idle state. Furthermore a sequential paging scheme is used to reduce the paging cost. The proposed scheme can be used in both cellular network and IP-based network.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.663-665
• /
• 1998

This paper investigates a facility location problem where there are possible demand points with demand occuring probabilites and actual distances between these points and the facility site to be determined are ambiguous, Further we define the fuzzy goal with respect to the maximum value among the actual distances between demand points and the facility. We determine the site of facility maximizing the minimal satisficing degree under the chance constraint. We propose the geometric algorithm to find this optimal site.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.4
• /
• pp.55-62
• /
• 2012

In this application study, field pilot tests were performed to evaluate the validity of a proposed formula between the exerted electrical energy and SPT N-value based on the result of the basic study. Measurement sensors and recording system were developed to obtain exerted motor current and drilling depth in a field. By using the correlation formula proposed in the basic study, the measured motor current and boring speed were applied to predict SPT N-value and the predicted N-values were compared to SPT N-value of site exploration. From the comparisons it is verified that the exerted electrical energy to bore ground might be used to predict SPT N-value and pile tip location.