• 한국구조물진단유지관리공학회 논문집
• /
• 제1권1호
• /
• pp.107-112
• /
• 1997

A series of reinforced concrete beams was tested to evaluate the flexural performance of the repaired RC beams. The key parameters for this study were the size and location of the patch, and the repair materials, including polymer, polymer-cementitious and cementitious materials. The repaired specimens failed by a typical flexural mode with minor interfacial bond failure. Beams repaired with polymer, polymer-cementitious and cementitious materials recover 100%, 91%, and 97% of the flexural strength respectively, while beams with cement mortar lose approximately 30% of the strength. Compared with the pressure injection techniques the specimens repaired with patching techniques show low flexural strength, with significant interfacial bond failure. Location and size of the repaired part do not affect the recovering performance. Interfacial behavior between repair and strengthening materials is the major influencing factor for the composite structures.

• 한국안전학회지
• /
• 제24권4호
• /
• pp.82-89
• /
• 2009

Unlike concrete bridge, steel bridge resists external force by forming thin plate. Thus, because steel girder bridge has big slenderness ratio, buckling is a major design factor. Plate girder consists of flange and web plate. Because of economic views, web plate that resists shear forces is made by more thinner plate. Thus, web plate has much risk for buckling. The objective of this study is to analyze the buckling behaviors of plate girder and to present the proper reinforcement location of longitudinal stiffeners. Various parametric study according to the change of web height, transverse stiffeners and load condition are examined.

• Communications for Statistical Applications and Methods
• /
• 제11권3호
• /
• pp.609-617
• /
• 2004

To present graph of probability densities, many softwares and graphical tools use methods that link points or straight lines. However, the methods can't display exactly and smoothly the graph and are not efficient from the viewpoint of process time. One method to overcome these shortcomings is utilizing interpolation methods. In these methods, selecting the number and location of knots is an important factor. This article proposes an algorithm to select knots for graphically presenting densities and implements graph components based on the algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.861-864
• /
• 2005

A LCD glass plate is supported by multi-pin and golf-tee type support. In the FEM analysis, the support condition is treated as simply supported boundary .condition. In this study, the optimization on the location of multi-simply support is conducted. The size optimization method of ANSYS 8.0 is used as the optimization tool to search for the optimal support location of LCD glass plate. In the manufacturing process, the support condition is a fatal factor of quality control of LCD production. From the results of optimization, deflection decreases 51% compared with the original model.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2023년도 제67차 동계학술대회논문집 31권1호
• /
• pp.427-428
• /
• 2023

최근 저가 시장에 신규로 진입하는 브랜드들이 급격히 증가하면서 메가엠지씨커피, 빽다방, 컴포즈커피, 더벤티, 커피에반하다, 요거프레소 등 중견 커피 프랜차이즈 경쟁도 치열해 지고 있다. 최근 중견 커피 프랜차이즈 시장 변화가 입지요인에 미치는 영향을 AHP기법 적용하여 우선순위를 도출하였고, 이를 5년 전 결과와 비교하였다. 입지요인 중 과거의 연구에서 높은 중요도를 보였던 '경쟁업체의 수'는 본 연구에서 중요도가 낮아진 것으로 나타났으며, 상대적으로 중요도가 낮았던 '경쟁업체와의 경쟁력'은 상위를 차지하는 결과를 보였다. 본 연구를 통하여 중견 커피 프랜차이즈의 주요 입지요인을 도출하여, 과거의 입지요인과 비교하여 그 원인을 파악하고 향후 커피 프랜차이즈의 발전방안에 대해 고려하고자 한다.

• 대한토목학회논문집
• /
• 제26권1D호
• /
• pp.23-30
• /
• 2006

임의의 도로에서 교통량 변동은 해당 도로를 이용하는 사람들의 경제활동, 생활패턴을 반영한 결과이다. 또한 도로가 위치한 곳, 도로의 용도 등에 따라 시간에 따른 교통량 변동 특성은 다르게 나타나는 것이 일반적이다. 본 논문에서는 산지 관광부, 해양 관광부와 같은 관광지로 접근하기 위한 도로의 교통량 특성을 나타내는 지표인 월 보정계수(Monthly Adjustment Factor), 요일 보정계수(Weekly Adjustment Factor), 그리고 설계시간계수(Design hourly Factor)를 산출하였다. 본 연구를 통하여 관광부 도로별 교통량 특성이 분석될 경우, 해당 도로의 적정 연평균일교통량(AADT) 및 설계시간교통량의 추정은 물론, 효율적인 교통소통정책 및 교통처리대책의 수립에도 크게 기여할 것으로 기대되며, 향후 도로용량편람 등의 개정을 위한 기초연구로 이용될 수 있을 것으로 기대된다.

• 대한영양사협회학술지
• /
• 제14권2호
• /
• pp.186-197
• /
• 2008

The aim of this study was to measure the brand images of contract foodservice management companies by identifying brand image attributes and then developing a measurement scale to measure the weight of these attributes. The measurement scale was developed by following a 5-stage process that included face-to-face interviews with experts, literature review, questionnaire surveys, verification of scale validity, exploratory factor analysis, and confirmatory factor analysis. A total of 137 items measuring brand image were collected: 37 items from studies of brand image and corporate image, 55 items from studies of contract foodservice management companies and 45 items from the internet and websites of contract foodservice management companies. A survey was then conducted to assess the validity and reliability of the questionnaire items. Ultimately, the 137 items were reduced to 40 items. The calculated Cronbach's alpha for the 40 brand image items was 0.934, demonstrating good internal consistency. Based on exploratory factor analysis (EFA), employee attitude, menu content, corporate image, dining location and ambience, along with 33 subattributes, were identified as brand image attributes. Employee attitude was the most significant attribute influencing brand image. After confirmatory factor analysis (CFA) and a review process, four brand image attributes and 33 subattributes were finalized and incorporated into the scale.

• 신재생에너지
• /
• 제7권3호
• /
• pp.83-91
• /
• 2011

The purpose of this study is to select appropriate location factors for wind power plant, provide detailed classification criteria, and find out appropriate sites for installing wind power plant in Gangwondo. In this study, the following 11 factors were extracted for site selection of wind power plant : wind resource, topography (valley angle, distance to the ridge), forest density, land use, preservation area, national park, Baekdu-Daegan, noise, shade, Transmission Line, and approaching roads. Each factor had relatively different level of importance so that AHP (Analytic Hierarchy Process) technique was used to calculated the weighted value per factor. For overlay analysis, classification criteria were prepared for each factor and each factor was classified into 3 grades : very appropriate, intermediate, poor. According to overlay analysis, the areas which received the highest grade (grade 5) was only in 0.16% of the total area of Gangwondo and had a tendency to exist along the mountain ridge over 600-meter elevation. Through analyzing the yearly average of wind power density, it was proved that the wind power density of areas with grade 4 or 5 had abundant wind resource over $400W/m^2$.

• 한국생활과학회지
• /
• 제16권1호
• /
• pp.123-135
• /
• 2007

The purpose of this study was to investigate the clothing behaviors and wearing sensation of ready-to-wear of the elderly woman who residing in the Pusan and Kimhae. The subjects were elderly woman who assessed the wearing sensation of slacks, jacket 1(1-2button), jacket 2(over 4button), and jumper. The results were as follows: 1. In the analysis of the clothing behaviors factors, the factor 1 was the concern about the appearance, the factor 2 was mental dependency about the clothes, the factor 3 was the satisfaction about the clothes and the factor 4 was the concern about the fashion. 2. As for the wearing sensation of the slacks, waist and thigh of the slacks was large and slacks length and crotch length was long. As for the wearing sensation of the jacket 1, over the age of 70 years was more satisfied than under the age of 70 for the wearing sensation of bust, waist, hip, and sleeve length. As for the wearing sensation of the jacket 2, under the age of 70 years was more satisfied than over the age of 70 for the wearing sensation of sleeve length and location of the armhole. As for the wearing sensation of the jumper, the area showed significant difference in waist. Jumper was larger than jacket.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.210-213
• /
• 1988

A new and accurate expression to derive a window area is presented with a sequence for daylighting design using Daylight Factor Method process not in its classical point--by-point method but in lumen method as in artificial lighting design process to consider daylight in the early stage of a building design process. Accepting CIE Overcast Sky as the worst state with the lowest sky luminance, a user of a room can have more available daylight in his or her room. In the design process uniformity is checked to ensure reasonably even daylighting by comparing the depth of the room with the computed limiting depth. After these steps the shape and position of window is altered, of which the Sky Component of Daylight Factor under an Overcast Sky, SCo, is investigated and computed in Composite Simpson Multiple Integral so that a building designer or an analyst can choose the best shape and location that satisfies his/her taste and purpose of the room.