• 패션비즈니스
• /
• 제9권5호
• /
• pp.37-50
• /
• 2005

The purpose of this study is to present basic data that can express beautiful silhouette by studying visual effect that depend on waist position of basic pants and the change of round belt width and analyzing the study of visual effect of the pattern design as well as the effect of design component. The stimuli are 21 samples: 7 variations of the location of the waistline and 3 variations of the width of the belt. The data has been obtained from 35 fashion design majors. The data has analyzed by frequency, factor analysis, anova, scheffe's test and the MCA method. The visual effects by the location of waistline and the width of belt are composed of 3 factors : horizontal direction factor, vertical direction factor and flexuosity factor. In these factors, horizontal factor is estimated by most important factor. Visual effect is positive when belt width widens as the location of waist line goes down to position of low belt. And in case the location of waist line is in the position of natural waist belt and low rise belt, belt of 3.2cm width is effective visually. The interaction effects between the location of the waistline and the width of the belt have significant differences in all factors. Factor that appears in visual effect of basic pants can be evaluated differently according to pattern of pants and characteristic of body shape. So we may receive better visual assessment if we consider the location of waist belt and width of belt in side of visual effect and image, when we produce pants giving variety to crotch depth.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.369-372
• /
• 2009

When measuring the luminous flux of a light source at the integrating sphere photometer, it can know the luminous flux to compare the standard lamp with the specimen lamp at the same location. But in case of PLS(plasma lighting system, microwave discharged lamp), that two lamps are cannot be the same location. If the reference illuminant and specimen lamp are cannot measure identical location, we should measure the variation of the luminous flux. For the outcome we can turn out a correction factor to revise and reflect it. But the better way is calibrate the specimen lamp locate the identical location of reference illuminant measured. In this thesis, we've test to find the correction factor for consider that change the measuring location. And it turns out the correction factor. From this, it presents the result to make a select for the reference illuminant which is against the illuminant type for newly produce.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권1호
• /
• pp.169-175
• /
• 2001

Bridge load rating calculations provide a basis for determining the safe load capacity of bridge. Load rating requires engineering judgement in determining a rating value that is applicable to maintaining the safe use of the bridge and arriving at posting and permit decisions. Load testing is an effective means in calculating the rating value of bridge. In Korea, load carrying capacity of bridge is modified by response modification factor that is determined from comparisons of measured values and analysis results. The response modification factor may be corrupted by vehicle location error that is defined as the gap of test vehicle location between load testing and analysis. In this study, the effects of vehicle location error to structural response and response modification factor are investigated, and a new method for evaluating response modification factor is proposed. The random data analysis shows that the proposed method is less sensitive to vehicle location error than the present method.

• Journal of the Korean Data and Information Science Society
• /
• 제22권6호
• /
• pp.1265-1273
• /
• 2011

This article deals with the problem of testing the equality of the location parameters in the half-normal distributions. We propose Bayesian hypothesis testing procedures for the equality of the location parameters under the noninformative prior. The non-informative prior is usually improper which yields a calibration problem that makes the Bayes factor to be defined up to arbitrary constants. This problem can be deal with the use of the fractional Bayes factor or intrinsic Bayes factor. So we propose the default Bayesian hypothesis testing procedures based on the fractional Bayes factor and the intrinsic Bayes factors under the reference priors. Simulation study and an example are provided.

• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.1095-1106
• /
• 2005

When X and Y have independent two parameter exponential distributions, we develop a Bayesian testing procedures for the equality of two location parameters. The reference prior in non-regular exponential model is derived. Under this reference prior, we propose a Bayesian test procedures for the equality of two location parameters using fractional Bayes factor and intrinsic Bayes factor. Simulation study and some real data examples are provided.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2004년도 춘계학술대회
• /
• pp.15-23
• /
• 2004

When X and Y have independent two parameter exponential distributions, we develop a Bayesian testing procedures for the equality of two location parameters. Under the noninformative prior, we propose a Bayesian test procedures for the equality of two location parameters using fractional Bayes factor and intrinsic Bayes factor. Simulation study and some real data examples are provided.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1273-1278
• /
• 2000

Bridge load rating calculations provide a basis for determining the safe load capacity of bridge. Load rating requires engineering judgement in determining a rating value that is applicable to maintaining the safe use of the bridge and arriving at posting and permit decisions. Load testing is an effective means in calculating the rating value of bridge. In Korea, load carrying capacity of bridge is modified by stress modification factor that is determined from comparisons of measured values and analysis results The stress modification factor may be corrupted by vehicle location error that is defined as the gap of test vehicle location between load testing and analysis. In this study, the effects of vehicle location error to structural response and stress modification factor are investigated, and a new method for evaluating stress modification factor is proposed. The random data analysis shows that the proposed method is less sensitive to vehicle location error than the present method.

• 한국유통학회:학술대회논문집
• /
• 한국유통학회 2006년도 춘계학술대회 발표논문집
• /
• pp.57-70
• /
• 2006

본 연구는 내실 있는 기업 유치를 증대시키기 위한 입지마케팅 정책을 수립하는데 적절한 함의를 제공할 목적으로 시도되었다. 구체적으로 본 연구는 충북지역의 기업체를 대상으로 기업의 입지환경수준을 기초자치단체의 지원정책, 광역자치단체의 지원정책, 중앙정부의 지원정책 등의 '지원정책요인', 동종 혹은 관련 산업의 집적, 풍부한 판매시장, 개방적 혁신적인 산업분위기, 대학, 연구소 등의 다양한 혁신기관의 집적 등의 '집적요인', 양호한 정보 통신망, 공항, 철도, 고속도로 등의 광역교통망과의 근접성, 저렴한 지가 혹은 임대료 등의 '입지기반요인' 등 세 가지로 구분하여 분석하였다. 이러한 기업의 입지환경수준을 세 가지 요인으로 구분하여 기업규모에 미치는 영향은 어떻게 존재하는 지에 대하여 실증적인 분석을 했다. 기업성장을 촉진시킬 수 있는 입지환경의 역할이 중요한 현실 하에서 입지환경수준과 기업규모의 관계를 분석하는 것은 중요하다고 할 수 있다. 이러한 연구결과는 기업에게 가장 적합한 입지마케팅 정책을 수립하고 방향을 설정하는데 도움을 제공할 수 있을 것이다.

• 한국항해항만학회지
• /
• 제39권5호
• /
• pp.423-429
• /
• 2015

The expansion on the scale of international trade and rapid economic growth in Northeast Asia have caused intense competition among global companies for securing international logistics center in Northeast Asia. Analyzing location competitiveness for international logistics center in Northeast Asia, this paper aims to extract implications for enhancing locational competitiveness. Employing the relative importance among location selection factors extracted from AHP analysis in prior study, we evaluated the major five port-cities in Northeast Asia including Busan, Gwangyang, Shanghai, Qingdao and Tokyo. In the evaluations, Shanghai (3.926) ranked as the first, followed by Busan (3.859), Qingdao (3.555), Tokyo (3.013) and Gwangyang (2.915). Furthermore, the causal relationships between determinants for location choice decision (logistics factor, cost factor, market factor, service factor and environmental factor) and dependent variables (competitiveness of international logistics center, potentiality to growth, present intention to move into and future plan to move into) were analyzed to provide implications. Results provide useful insights for further improvements, and helps strategic agenda for future development of port-cities.

• 무역상무연구
• /
• 제64권
• /
• pp.187-210
• /
• 2014

As port functions change to act as an economic catalyst and take on a central position in industries engaged in international trade, port hinterland has become a significant component in international shipping. The success of port hinterland as a strategic base of logistic activities critically depends on location selection factor for international distribution center that links elements of global supply chain management. By examining multi-measurement items empirically, this paper analyzed location selection factor for international logistics distribution center in port hinterland, and evaluated Busan new port hinterland from the user's perspective. Employing exploratory factor analysis, the results revealed that the model structured around five factors incorporating geo-location and accessibility, availability, political supports, cost factors, and quality of business environment is valid and reliable in the context of the location selection factors for logistics distribution center in the context of port hinterland operations. The evaluation of Busan new port hinterland provides useful insights for strategic improvement to accommodate the users' expectation. Further, the model offers both a descriptive and diagnostic strategic management tool for port hinterland development and operations, to guide future improvement.