• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.282-284
• /
• 1999

This paper presents an accurate algorithm for fault location of a single phase to earth fault on a two-parallel transmission line using only one-terminal data. It is impossible to calculate the accurate fault distance, because of the unknown fault resistance and fault current at the fault point. The faulted line circuit and the zero-sequence circuit of two-parallel line are used as a fault location model, which the source impedance of the remote end is not involved. The algorithm can eliminate the effect of load flow and the fault resistance in calculating the fault location.

• KIEAE Journal
• /
• v.10 no.6
• /
• pp.3-10
• /
• 2010

The subject is to find green roofs' location as stepping stones in green-network in fine scale. The study site is Junggu, Seoul, which has core areas(Bukaksan and Namsan) and green areas(parks, etc.). Through literature review, the closer to core areas and green areas, target species reach green roof easier, and target species must be avifauna(flying species) and high class in food chain, because of possibility of reaching. So, Great Tits, inhabited in Namsan and urban bird, is target species. The location standard of green roofs, realized birds' reaching distance, consists of home range(horizontal range and vertical range) and roof-greening capable area. The green roofs' distribution of location was resulted through GIS analysis of feasible site finding, and classified with weight of score. In discussion, Namsan gives more effect to locate green roofs than Bukaksan does and selected buildings which are grouped in some parts need to be managed with group, green roof district.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.1
• /
• pp.9-15
• /
• 2019

DIRCM is a device that deception missiles by directing the light source to missile seeker with infra-red laser based turret. The effectiveness of the device is affected by changes of the turret's Field of View (FoV), and also influence of the interference devices determines the effect of the DIRCM's effectiveness. Therefore finding mounting location for DIRCM is critical parameter for the DIRCM's effectiveness. so we applied stiffness review, interference analysis, FoV analysis and simulation analysis method to Multi-purpose helicopter for the find DIRCM location. As a result, in case of 1 DIRCM mounted at helicopters bottom shows 30~40% survivability. case of 2 DIRCM mounted at both side shows 70~80% survivability.

• Journal of Technology Innovation
• /
• v.17 no.1
• /
• pp.69-95
• /
• 2009

This paper examines the motives for location decisions of startups and dynamics of cluster growth. Because the location decision is intrinsically strategic choice by entrepreneurs, it is an interplay of three critical forces; cost-benefit of the choice, R&D ability of new entrants, and R&D capability of incumbents in clusters. The effect of knowledge spillovers influences the cluster growth like a double-edge sword; both a positive effect of technology learning and a negative effect of knowledge de-learning. Using data on 710 bio-tech venture firms in Korea, this paper tests the hypotheses about the factors influencing the growth of the cluster. The empirical analyses suggested that early entrepreneurial activity in the clustered regions were important, however other factors such as the organizational legacy, internal dynamics inside a cluster, and the existence of cooperation norm in the cluster, affected long term viability of the cluster.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.559-569
• /
• 2009

Due to environmental, economical and the other limitations, it has been more difficult to construct new large hydraulic structure such as dam. For this reason, it has been tried to use small hydraulic structure such as washland as alternative of hydraulic facility. Because the flood control effect of small hydraulic structure are affected by runoff volume, hydrograph, storage capacity and weir crest elevation, and design frequency must be predetermined for the design of the hydraulic structure. Multiple washlands will be required to satisfy enough peak reduction effect so that considering washlands as a network, rather than individually, are critical to analysis of flood reduction effect. In this study, new index for determination of optimal location for washlands is presented and the existing model for this determination is modified by adopting the new index. Developed new model is applied to Ansung river basin for examination and the new model shows its' applicability as a decision making criteria for the determination of optimal location for washlands.

• Explosives and Blasting
• /
• v.29 no.2
• /
• pp.51-58
• /
• 2011

Frequency is a very important factor in discussing the effect on facilities such as precision instruments and therefore, in evaluating the effect of blasting vibration, it is necessary to identity information on frequency in addition to maximum amplitude of vibration. This study collected rock samples in gneiss area to perform an indoor rock test and to identify frequency of blasting vibration according to priming location, performed of single hole test blasting. Then the study decided dominant frequency through FFT and analysed changes according to priming locations. Consequently frequency range according to priming location is indicated top priming is distributed high range, bottom priming is distributed high range, middle priming is distributed evenly range. Frequency trend according to priming location is indicated distance increase with frequency discrease in top priming, distance increase with frequency increase in bottom priming.

• KIEAE Journal
• /
• v.14 no.2
• /
• pp.11-19
• /
• 2014

Building energy consumption takes up almost 25% of the total energy consumption. Therefore, diversified ways, such as improving wall and window insulation, have been considered to reduce building energy consumption. Recently, green roof system has been explored as an effective alternative for dealing with reducing heating and cooling energy, thermal island effect and improving water quality. However, recent studies regarding a green roof system have only focused on building energy reduction without considering the applied usage, location, and story of the green roof system. Therefore, this study pays attention to the heating and cooling energy in relation to the applied usage, location, and story of a green roof system for investigating its impact on energy reduction. The result of simulations show that the reduction in heating energy consumption is higher when applied to Cherwon-gun province which has a continental climate condition, compared to the city of Busan that is distinguished by its warm climate. Cooling energy saving turns out to be higher when the green roof system is applied to Busan in comparison with Cherwon. As for the applied usage or function of the building, residential space acquires the highest heating and cooling energy saving effect rather than commerce, educational or office space because of HVAC's running time based on usage. When it comes to the story of the green roof, both heating and cooling energy saving become the highest when the green roof is applied to single-storied buildings. The reason is that single story building is affected by the ground largely. Generally, the variations of heating energy consumption are larger than the cooling energy consumption. The outcome of the simulations, when a green roof system is applied, indicates that the energy consumption reduction rate is dynamically responding to the applied usage, location, and story. Therefore, these factors should be counted closely for maximizing the reduction of energy consumption through green roof systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1053-1058
• /
• 2016

The eLoran(enhanced Long Range Navigation) transmitting antenna is analyzed for co-location with an AM transmitting antenna in an MF transmitting site. To compensate for the loading effect, the umbrella-type loading is applied for eLoran antenna. The validity of the co-location between the MF antenna and the eLoran antenna is verified through the simulation results of the radiation pattern and the return loss. Also, coupling including antenna matching circuit is analyzed to verify the effect of the transmitting circuit. The coupling between the LF and eLoran antenna is -53.3 dB at 100 kHz and -64.8 dB at 1,053 kHz, respectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.2
• /
• pp.9-16
• /
• 2007

The fatigue test of the fillet weldments were executed with different groove angles and porosity. The groove angles of $90^{\circ}$, $45^{\circ}$ and $55^{\circ}$ were compared with fatigue lives. After the fillet weldment failure, the porosity which found at the fractured surface were observed to account the effect on fatigue life. Finite element analysis were performed to correlate the fatigue strength and the size & the location of porosity. The stress-strain field were severely affected by the length of notch and the size & location of porosity. Based on the quantitative analysis of porosity effect, the total volume of porosity was key factor for fatigue strength of the fillet weldment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.40-47
• /
• 2015

Dynamic response of any small structure is always affected by the mass of the attached accelerometer. This paper predicts the natural frequencies and frequency response functions by removing the mass loading effect from the accelerometer. This mass loading is studied on a simple cantilever beams by varying the location of accelerometer. By using sensitivity analysis with iteration method, accelerometer mass and location are obtained. The predicted natural frequencies of the small cantilever beam without the accelerometer's mass show good agreement with the structural re-analysis.