• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.2
• /
• pp.57-65
• /
• 2009

In continuous review inventory model, (${\varrho}$, ${\gamma}$) system, order quantity(${\varrho}$) and reorder point(${\gamma}$) should be determined to calculate inventory-related cost that consists of setup, holding, and penalty costs. The procedure to obtain the exact value of ${\varrho}$ and ${\gamma}$ is complex. In this paper, a regression analysis is proposed to get the approximate inventory-related cost without the determination of ${\varrho}$ and ${\gamma}$ in the case that the standard deviation(${\sigma}$) of the lead time demand is small or that the mean(${\mu}$) of the lead time demand is proportional to ${\sigma}$. To save inventory-related cost, central warehouses with (${\varrho}$, ${\gamma}$) system can be built. Central warehouse can provide some stores with products with the consideration of the tradeoff between inventory-related cost and transportation cost. The number and the location of central warehouses to cover all the stores are determined by a regression-based approach. The performance of the proposed approach is tested by using some computational experiments.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.389-395
• /
• 2007

It is necessary to research on wireless position determination technology that enables location based services on Portable Internet. In this paper, I consider the position determination technology based on TDOA belong to trilateration method. That is using the difference of relative distance between base stations and terminal due to the time difference of arrival of downlink signal. In order to design the positioning server, This paper reviews the related research on current status of wireless position determination technology based on TDOA on Portable Internet. And then, it is suggested that system architecture, network interface, the calculation model for position determination, which are adapted to circumstance of portable Internet. Through this research on the positioning server, it is expected to guarantee that low cost and high efficiency of wireless positioning server on Portable Internet will be developed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.884-890
• /
• 2018

In this paper, an improved method of estimating static source location is proposed based on the direct position determination(DPD) method, which estimates a source position directly using received signals. When the source position is estimated using the conventional DPD method, the estimation accuracy and error depend on a pair of receivers: a reference receiver and one of the multiple moving receivers. Based on this, the weighting values of the estimating source location were obtained using the covariance matrix for the pair of receivers($S_1$, $S_{2i}$) and applied to the DPD algorithm. Finally, the source position was estimated using the proposed DPD algorithm, and it was verified that the estimation accuracy improved, compared to the conventional DPD algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1855-1862
• /
• 2022

Various indoor location-based services can be provided through indoor presence determination and indoor positioning technology using Beacon. However, since the BLE signal advertised by the beacon has an unstable RSSI due to problems such as multi-path fading, it is difficult to guarantee the accuracy of indoor presence determination. In this paper, data were collected while the classroom door was open to ensure accuracy in various situations. Based on the collected data, we propose an indoor presence determination method considering the characteristics of the signal. The proposed method uses support vector machine, showed about 10% accuracy improvement compared to the results using raw RSSI only. This method has the advantage of being able to accurately determine indoor presence with only one receiver. It is expected that the proposed method can implement a low-cost system for determining indoor presence with high accuracy.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.1
• /
• pp.33-40
• /
• 2018

The rate of fire in buildings is gradually increasing in these days and the damage of property are severely increasing. This study suggests a methodology that provides information of the emergency exits based on indoor location services. The methodology uses determination technology and the latest update of indoor map generation via the built-in sensors of smartphone. This paper enhances the accuracy of indoor localization, and also it is to study how to provide exact indoor layout for rescuing the workers in emergency, such as fires and natural disasters.

• Korean Journal of Hydrosciences
• /
• v.7
• /
• pp.21-35
• /
• 1996

This Study is to develop the suitable hydrologic models for determination of the size and location of detention storage facilities to restrain stormwater runoff in urban areas. Hypothetical areas of two levels are considered to seize the hydrologic response characteristics. A one-square-kilometer ares is selected for the catchment level, and a 10-square-kilometer area consisting of 10 catchments is adapted at the watershed level as representative of urban drainage area. In this analysis, different rainfall freqyencies, land uses, drainage patte군, basin shates and detention storage policies are considered. Folw reduction effect of detention storage facilities is deduced from storage ratio and detention basin factor. A substantial saving in detention storage volumes is achieved 노두 the detention storage is planned at the watershed level rather than the catchment level. For the application of real watersheds, two watersheds in Seoul metropolitan area-Jamshil 2 and Seongnae 1-are selected on the basis of hydrologic response charactaristics. Through the regression analysis between dimensionless deterntion storage volume, dimensionless upstream area ratio and reduction rate of storage ratio, the regression equations to determine the size and location of detention storage faclities are presented.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.17-23
• /
• 2008

Development of die technology for holder and barrel dies is necessary according to minimization of lens assembly, image sensor, and connectors. In these cases, there are two technical problems arising from die design. One is determination of knock-out pin location in die set. Minimization of lens assembly size make it difficult to obtain ejecting space. The other is whether or not high-precision die technology is possible to reduce torque variation when holer and barrel products is assembled. In this study, multi-cavity die set was developed taking advantage of gear-driven ejecting method. In the developed technology, die manufacturing technology was guaranteed with a high-precision level.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.187-194
• /
• 2015

Accurate relative location estimation is a key requirement in indoor localization systems based on wireless sensor networks (WSNs). However, although these systems have applied not only various optimization algorithms but also fusion with sensors to achieve high accuracy in position determination, they are difficult to provide accurate relative azimuth and locations to users because of cumulative errors in inertial sensors with time and the influence of external magnetic fields. This paper based on ultra-wideband positioning system, which is relatively suitable for indoor localization compared to other wireless communications, presents an indoor localization system for estimating relative azimuth and location of location-unaware nodes, referred to as target nodes without applying any algorithms with complex variable and constraints to achieve high accuracy. In the proposed method, the target nodes comprising three mobile nodes estimate the relative distance and azimuth from two reference nodes that can be installed by users. In addition, in the process of estimating the relative localization information acquired from the reference nodes, positioning errors are minimized through a novel modified rounding estimation technique in which Kalman filter is applied without any time consumption algorithms. Experimental results show the feasibility and validity of the proposed system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.9
• /
• pp.777-785
• /
• 2000

This paper provides a guideline for the determination of compliance characteristics and the proper location of the compliance center in typical peg-in-hole and peg-out-hole tasks using hands. We first observe the fact that some of coupling stiffness elements cannot be planned arbitrarily. The given peg-in/out-hole tasks are classified into two contact styles. Then, we analyze concluded of the operational siffness matrix, which achieve the give peg-in/out-hole tasks effectively for each case. It is concluded that the location of the compliance center on the peg and the coupling stiffness element existing between the translational and the rotational direction play ompliance on the peg and the coupling siffness element existing between the translational and the rotational direction play important roles for successful peg-in/out-hole tasks. The analytic results verified through simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.843-845
• /
• 2016

Concomitant with development of AR(Augmented Reality) and VR(Virtual Reality), interest in location based games and augmented reality have increased and various services have been developed. Due to this, AR, VR, MR(Merged Reality) techniques are considered one of fourth industrial revolution techniques. Oculus Rift which is representative of VR technology, and HTC VIVE need separate controllers, and don't offer service such as receiving external video information when users are using devices. In the case of project Alloy, which is a MR device of Intel, this has advantages such as controlling devices through hand signals and facial expressions, and receiving external video information. In this paper, we propose tourist guide system based on current position using MR. This system makes economical tour possible by arranging tourist attraction information which is from current position of tourists in correct places through external video information using MR, location determination using GPS, tourism information search using wireless internet.